Machine Guide 3 | How to Choose and Use E80 Nozzles and Air Assist
Vložit
- čas přidán 28. 08. 2024
- Choose air nozzle and air assist due to your project.
Long nozzle mostly for engraving and simple cutting projects.
Short nozzle for cutting thick materials.
NEJE Max 4:
neje.shop/prod...
🔗For more products:
neje.shop/
🔗Get NEJE ideas:
nejetool.com/
🔗Join our FB group :
/ neje.shop
I just receive the long nozzle, Does it supposed that I should receive both?
Hello!
You are supposed to receive a small package with a long nozzle inside and the short nozzle already on the E80 module. If you have any questions please feel free to contact us.😊
Can you make a video on how to set up each configuration of air assist please.
Hi,do you mean the configuration in Lightburn or ,the small air pump is like a fish pump you know,and the big air compressor is a 5-8 bar one,and there is one more air filter regulator.
Thank you.
Can I combine the automatic relay for internal small air assist with electromagnetic valve for external stainless steel? So small air assist is always running and large one only when necessary?
The small air assist's function is to protect lens inside of the laser module from dust out side.So we suggest you to use small air assist with internal air tube.Use 5-8 bar air assist with external stainless air tube.
I think you're advising the opposite in the last method about the best way to connect the small air assist and air compressor.
The diameter of my long nozzle is too wide and doesn’t fit. How do I go about resolving this issue as most of my commissions are for engraving.
Hi ！The long nozzle is divided into two parts. The outer protective shell can be adjusted. You can install the inner part first and then adjust the protective cover. Its function is to block the laser light to protect your eyes.
You can join our Facebook group NEJE_Laser, and our staff will answer your questions as quickly as possible.😊