Hola tengo una duda LA ARENA es la comun de la pared...te doy like porque esta bueno el video (no conosco la arenadora y estoy pensando en mis rejas que estan destrozadas de pintura gracias.-
The maximum particle size must be 1/5 of the nozzle outlet hole. For example with a 3mm nozzle the granulometry or sand, at most 0.6mm. (3mm / 5 = 0.6)
Need a larger compressor. Most people use the 1/4 inch coupler. I see you used the larger one. You can all soak the rusty part in 1 part molasses to 9 parts water for 7 days, and the rust will wash off with running water.
Из пескоструя соорудил пескоструй, этож надо такой хрени в голову придти. Я им радиатор охлаждения масла АКПП промывал раз в год на RX 350, классная штука.
Isn't the starting gun already a sandblasting gun? it seems to me that the red container is used to put the abrasive which is then vacuumed by depression
That's a parafin gun but in all honesty if you was to take the nosel off the end I would have thought it could do the same job ... Never tested this theory so would be interesting
@W W this is wrong, I have a sandblasting gun which does not work by gravity but by depression, the tank is under the barrel :) (like the Metabo SSP 1000 for example)
I don't have all those things just laying around ready to be destroyed, so I guess buying the real deal would be cheaper for me. Thanks for the video anyway.
Balkan handyman? More like Balkan Xzibit, "Yo I heard you like sandblasters, so i put a sandblaster on top of your air nozzle and turned it into a sandblaster"😂
Con el costo de las dos pistolas que desarmó para hacer una, se podia comprar dos pistolas arenadoras With the cost of the two guns that I disassemble to make one, you could buy two sandblasting guns haha
Link of time for 4 years in maritime college. Western thinking with soviet childhood monetize everything, if you wanna live in western world well, keep silence, boast and selfish is the answer.
I tried it ... it works !!! thanks for the awesome video.
I can't get the small pipe out. Please advise
MARAVILLOSO EL INVENTO
Warum hast du es modifiziert????.... funktioniert die Pistole nicht in original Ausführung????
Making a sandblaster out of a sandblaster.
Didn't know that was something i could do at home. Thank you kind sir.
Thought it was a paint gun?
The legend say that 3000 years later he still removing rust from that piece
😜😜😜
legend says you still haven't figured it out how to make it 🤣
Yo iba a fijar el tiempo en 30 días más tarde ..... y fueron 3000 años !!!! Jajaja.
Nice DIY svaka cast za video!!
Hvala brate, svaka podrška znači 😊
The most interesting part of this was the way to find the centre of a round object
🤣🤣🤣
except he didn't find the center. It was clearly off center.
@@jtltet bjj
Your calipers have seem better days. Nice trick, I have some spare parts I will try it...at last it is inexpensive. Congrats.
Not bad. With a little extra expense on some BSP nuts n fittings to replace the JB weld I'd say you could up the PSI to make it work even better.
😊😊😊
@@BalkanHandyman I want to buy, cost?
Great idea! Thanks for sharing my friend!
Thanks bro 😊
@@BalkanHandyman You are welcoe my friend
@@christofix 💪💪💪
List of stuff that is used in the video would be great! Nice vid
Rickard Weed will cost you a fortune
this is the video of all time for homefixers!
Perfect idea..good job bro
Thanks 😊
really cool idea
😊😊😊
what sort of sand is being used? if silica sand it should only be used in a cabinet or full face oxygen fed mask
Hola tengo una duda LA ARENA es la comun de la pared...te doy like porque esta bueno el video (no conosco la arenadora y estoy pensando en mis rejas que estan destrozadas de pintura gracias.-
great job man
thanks bro 😊
I m struggling to remove centre pipe
Looks awesome
Nice DIY idea
Thanks 😊
Nice idea keep up the good work , will try soon .
😁😁😁
How did it went
mis saludos desde venezuela....interesate muy bueno el proyecto
Thanks 😊
Great job ! 👍🏻
Where can i buy it? Anyone has information?
Very very brilliant idea
The maximum particle size must be 1/5 of the nozzle outlet hole.
For example with a 3mm nozzle the granulometry or sand, at most 0.6mm. (3mm / 5 = 0.6)
Комментарий не несет смысловой нагрузки, просто поддерживает видео и автора канала.
Maybe you need a stronger compressor? What Psi were you on?
Cool
What is the red canister please ?
Этого аппарата хватит на 5 минут, потом все нахрен сотрется песком.
Suitable for weak compressors👍
😊
Why epoxy? Why not find the right fitting?
Looks more expensive than the real thing
😊
Cut the bottom off of a pop bottle and tape it to the end of the tip to keep sand away from your face and everything else
why is it better then original? what is the benefit?
Ako uzmes staru svjecicu i konektujes na crijevo s vodom dobit ces bolji efekat bez kompresora.
Хороший пескоструй,шарику яйца щекотать.😆😆😆😆😆
Intelligent!
my friend. very nice. bravo.. thank you so much....
Thanks 😊
Respect!!!
Wath is the reason for this complicated construction???
Rumour has it he is still cleaning that rust off!
I wonder how the man threaded the hole just with thrusting the drill
yhea i would'nt say it's made fron lottel but nice creation of course you first need to buy all that stuff...
I got this parts for free 😉
Need a larger compressor. Most people use the 1/4 inch coupler. I see you used the larger one. You can all soak the rusty part in 1 part molasses to 9 parts water for 7 days, and the rust will wash off with running water.
I'll try and will report back the result. Sorry, skeptical, but love sweet ideas!🤣
awesome video
Thanks
Это гениально,взять пескоструй и сделать из него пескоструй.
0:40 you GLUED it ? was it too difficult to buy a simple screwable joint ?
Очень намудрил с конструкцией,можно проще,и дешевле
Так этож забугорное видео, забогорные жители, вот и делают все через одно место. Крайне не удобная конструкция, все на эпоксидке. На пару раз...
Как раз на время самоизоляции, убить это самое время и деньги. В качестве развлечения .
It sale or not
Why not just use the sandblaster you already had?
A nozzle will go quickly
Из пескоструя соорудил пескоструй, этож надо такой хрени в голову придти. Я им радиатор охлаждения масла АКПП промывал раз в год на RX 350, классная штука.
on a vu plus simple pour sabler !
?
Isn't the starting gun already a sandblasting gun? it seems to me that the red container is used to put the abrasive which is then vacuumed by depression
That's a parafin gun but in all honesty if you was to take the nosel off the end I would have thought it could do the same job ... Never tested this theory so would be interesting
I thought the same thing .. did he just take apart a sandblast gun to make a more complicated sandblast gun?
@W W this is wrong, I have a sandblasting gun which does not work by gravity but by depression, the tank is under the barrel :)
(like the Metabo SSP 1000 for example)
@@anthonys4685 I presume with sand you need to blow air in from the bottom, unlike with liquids.
I need your copressor for sand blasting, where is ur direct address
I don't have all those things just laying around ready to be destroyed, so I guess buying the real deal would be cheaper for me. Thanks for the video anyway.
Yo quiero saber los de talles de la espuma como se ase i de que liquidos
?
Don't look like it works that good😂
Без керамического сопла на 10 минут работы хватит!
Железной щеткой можно очистить гораздо быстрее
Balkan handyman? More like Balkan Xzibit, "Yo I heard you like sandblasters, so i put a sandblaster on top of your air nozzle and turned it into a sandblaster"😂
Готовый пескоструй стоит 3,5 копейки, а два пистолета угробил
?
@@BalkanHandyman Чего, по-русски не понимаешь?)))
Disculpe puedo ponerle agua al deposito
Yes 😁
А сопло че не показал после эксперимента? Вангую что его хватит на 3-4 банки песка.
can you translate your comment on English?
@@BalkanHandyman 4minut anb dead point
🤔🤔🤔
i was thinking i need one of those to clean the muck of my daughter's trainers.
чето я непонел в чем прикол?
glue on airline fittings i don't think so
Say no to the jb weld and just get a piece of 1\4 inch fully threaded pipe instead of flipping the quick connect over its much safer
😊
Через 5 мин будет сопло на всю ширину трубки...от свечи вставьте керамику хотя бы..😉
I am no expert but with pressure and glue . Better wear eye protection, just to be safe. Lot off effort to make vedios, thnaks
Lokks nice but how you hold in your hands, looks wery uncomfortable
هاي الطريقة اسمها قصف الرمال
Salute
Пистолет для пескоструйной обработки купить не пробовали гораздо проще чем городить не понятно что....
Con el costo de las dos pistolas que desarmó para hacer una, se podia comprar dos pistolas arenadoras
With the cost of the two guns that I disassemble to make one, you could buy two sandblasting guns haha
Exactamente eso pensé
Además necesita un pico cerámico en la salida porque al de metal en un rato lo desgasta por completo.
good
😄😄😄😄😄 10 Years later!!!!
$21 at Harbor Frieght
Сразу видно что не русский
Влага с компрессора идёт а это не для пескоструя!!!
Не говори. Тройник впендюрить не проще было . Чем уродовать пистолет для накачки шин . Не русский блин
Too complicate idea, but works. There is a lot simple way.
give me link for something simple
Link of time for 4 years in maritime college. Western thinking with soviet childhood monetize everything, if you wanna live in western world well, keep silence, boast and selfish is the answer.
CZcamsr: how to make sand blaster!
Comments section: *utter gibberish about soviets and capitalist*
Holy cow just buy a sand blasting gun instead of ruining good tools.
Three weeks later...
The spray hole too big
Извините но неудачно и очень сложно.
Хуйня полная, если по-русски и своими словами. 🤔
Best
i Have A Few quession Please Reply Me Soon ?
ok
@@BalkanHandyman What kind of material is used for it?
Bad Machín!!
Проще готовый ( напорный принцип действия
) купить. И эффект будет
, более продуктивнее . А представленное здесь ( деньги на ветер ).
takim piaskowaniem to mozesz pankocie swojej piaskowac .......
Конструкция чумовая но чистит как-то плохо
?
согласен.
Только инструметы испортил.
And...Bingo was all Lame-oh!
😲😲😲
Mejor no hago nada. O mejor me duermo
Es un tutorial de cómo hacerse pendejo
Your psi is set too low. Would work better in between 80-100 psi. And check which media you are using.
😁
Cheap sanblaster would probably cost same as these two hardware pieces minus human work...
this parts I got for free 😉
2 años para limpiar eso.
Why does it have a lot of unlikes ?
I don't understand why people unlike this video?
Jealousy
I tried a couple diy sandblasters and ended up with a glorified confetti gun.
VALLAHİ SÜPER SELAM
🤔