Simple Side Table | Build It | Ask This Old House
Vložit
- čas přidán 30. 09. 2016
- This Old House general contractor Tom Silva shows how to construct a simple yet beautiful side table. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Shopping List for a Simple Side Table:
- 2x2 fir balusters, to make the table legs
- 1x4 fir decking, for fabricating the table aprons
- 5/4-by-6-inch fir decking, to make the tabletop
- Carpenter’s glue, for gluing together wood parts
- Narrow stick, to spread glue
- Cloth, for wiping away excess glue
- _-inch plywood and toggle clamp, to make tapering jig
- 120-grit abrasive disks, for random-orbit sander
- 1_-inch pocket screws, to screw together wood parts
- _-inch-thick spacer blocks, for creating a reveal between the aprons and legs
- Double washers and 5/8-inch screws, for securing the tabletop
- Furniture glides, to fasten to the bottom of each leg
- Primer and paint, wood stain, or clear polyurethane varnish, to finish the table
Tools for a Simple Side Table:
- Miter saw, to crosscut lumber to size
- Table saw, for ripping lumber to size
- Bar clamps, for clamping together the tabletop
- Random-orbit sander, to sand smoother wood parts
- Router and 1/8-inch-radius rounding-over bit, to shape the edges of the table legs
- Pocket-hole jig, for making pocket-hole joints
- Cordless drill, to drill holes and drive screws
- _-inch spade bit, to drill recesses for double washers
- Hammer
To build this table, Tom used stock fir that is normally used for building decks, including:
½" x 6" decking for the top
1" x 4" decking for the spreaders or rails to which the legs attach
2" x 2" balusters for the legs
To attach the rails to the legs, Tom used a pocket hole jig and pocket screws, all manufactured by Kreg Tool Company [www.kregtool.com/] and available at home centers and woodworking supply stores.
Expert assistance with this project was provided by Anderson & McQuaid Co, Inc. [www.andersonmcquaid.com/]
Build It:
This Old House general contractor Tom Silva, This Old House host Kevin O’Connor, and special guests including Jimmy DiResta, take you through step-by-step DIY projects in this popular video series. From end-tables to cutting boards to wine racks to chicken coops and more, learn how to build from the best pros in the game. Segments include mention of all tools and materials needed to get the job done.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
bit.ly/2GPiYbH
Plus, download our app for streaming full episodes to your connected TV, phone or tablet:
bit.ly/34RYEP5
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
Simple Side Table | Build It | Ask This Old House
/ thisoldhouse - Jak na to + styl
I wish you would do a video where you show how to make all the jigs and the theory behind designing them!
Really interesting thanks.
My only suggestion would be to show a bit more of the finished product...maybe stained.
I'm almost 38 yrs old and just found out about double washers! Thank you! I groaned as a kid having to watch these shows with my Mom but now enjoy them immensely.. I've built most of the furniture in my home and it feels so good to walk around and use what you've built with your own hands. I feel like these younger generations need to be forced to watch these shows as kids so building and fixing things that are broken doesn't become extinct with them.
I wish I worked for Tom,he is so good at teaching his expertise.
jigs used are way more complex than table!
@@ricnrolle False. It is only utilitarian for that ONE exact taper.
@@brucewelty7684 I have used my taper jig for at least twenty years
@@richardducat1686 20 years, still propping up that fence. 😆
i got the desire to do it my self your way this old house but am still training about whole lot of years of training. I do know that table is built from years of work thanks this old house.
Just, beautiful.
I wish they would give a shout out to Norm Abrams when they do furniture..I miss him on the show he created
That's the idear!
5:54 cracked the wood on the leg
Awesome!! I love your channel man!!
Mr Silva is a sweetie and my favorite :)
good job guys
Crums, I wish i could get nice timber like that in Australia. It seems like all we can get is warped and knotted rubbish from the large hardware outlets or anything that approaches reasonable is anything but when it comes to price.
That festool sander sounds like it is on its last leg, time for a Harbor Fright run.
that's freight
Sorry dam spell check
I was just kiddin'.take care!
Brian Ralph no, he was right the first time, their tools are garbage, definitely should change their name to harbor fright
M, m, mmm! Nice!
They gave us like 7/16ths of a second to see the finished product 😂
It's called pause
@@justinwoods240 ...and you’re called a douchebag.
Yes that always bugs me 😊
I thought the same thing... even with pause, it's SUPER quick
That’s the idear.
Nice job.
Sure would like to know how to make that taper jig. I like it
Angie Overton right? That was pretty cool and they glossed right over it.
Same - cutting that jig was the only tricky part and it wasn't shown....
They're easy to make
Aaron Meyer how is that then Aaron?
Martin Green I cut the same pattern they did from the 1x4, but added a mdf base wider than the template but flush on the cut side. Added a little clamp like they have, and made a swivel block to adjust for different length boards and to adjust where I wanted the blade to make contact at
I miss the new yankee workshawp
Me to
Norm is the reason why I even started woodworking
tommy has gone Festool mad!! $50,000,000,000,000,000,000,000,000 for a Festool tape measure :-)
Fariko Mike the sander sounds like shit
Fariko Mike Yeah, that router he used about $600 - $800 🤣🤣🤣🤣🤣
Uh, I don't think so (and I'm not talking about your hyperbole). He probably gets those tools for free just for using them on his show.
Festool makes a couple nice things and everything else is average. They will not make you a better woodworker. Only a broke one ;)
Thats the idear
tommy has a jig for everything
Beautiful table!.....One question....what is the best suggestion you have to protect the wood if the table were to be outdoors?
outdoor water proof stain
Use the same stuff as for decking protection.
The man loves his jigs.
Dam I wanted to see some kick back action
Do you flip after wiping away the glue and wipe the bottom?
I assume so
I'm surprised that I have never seen Tommy use a Radi-plane.
Double washers if only i could find them here in the UK ,Nothing comes up with a search on google here in UK using the words Double washers .
lol.. buy used for cheaper or just from Ikea for a few dollars. cool project if you have the wood already
Okay so, if I don't have a table saw, how can a cut off the rounded over edges accurately?
Table-mounted router. Treat it like a planer on it's side, using a straight-cutting bit.
Circular saw and jig
Can't squeeze all the glue out. That's a common myth in wood working. Wood absorbs it. Better to get it tight so no air bubbles...
It's no myth. Too much pressure and the hold can actually fail.
A trick I learned way back with old-school glue was to take a nail and hammer small dimples/holes on the glue-up surfaces for that little bit of extra space for hidden glue expansion. Not sure if it really made a difference...
I’d love to know what happened to all these pieces they make.
Once they got rid of Norm, Tommy has to do double duty - woodworker and carpenter.
Nice.. but where is Norm?
Ian Roughley norm has retired i think :-(
I believe it's spelled "Naaahhm"
OK. BFD. That Biesemeyer fence costs more than my entire shop set-up. How about some projects that target real people on a strict budget?
You really should show more of the finished product. That's the payoff! You're cutting away from the Superbowl to show Heidi.
6:02
2022 ....500.00 in materials
Is he going to show a tutorial how to make that jig thats probably 5 times harder to make then the whole table itself? I want to know how the hell this guy makes everything look so freaking easy. I'm having a hard enough to maaking perfectly straight cuts on the table saw.
the only problem here is - if somebody owns a table saw, router and industrial sander.. chances are, they already know how to build a simple table...
still34u I know what I'm doing but watch videos like this for ideas
czcams.com/video/nAF2wpD8fi4/video.html
I own all those things. no idea how to make anything
Rod Cameron I am a beginner too. Its fun. I love it. Maybe we can share ideas.
The only tool you really need is the table saw. You can round over the edges with some sandpaper
Legs are too thin. You could see it wobble a bit when they set it on the ground.
+Fredrik make your own DIY video if you are so damn good smart guy.
Didn't notice it. But wobble h as nothing to do with the thickness of the legs.
5 quarter? Cmon..
Why build it "simple" when you can build it right. Mortise and tenon for the leg/rails would be much stronger, and a few strokes from a hand plane would have given you the taper without having to sand after. Nothing wrong with power tools but in many cases, they make things a lot more complicated.
Mortise and tenon is the Definition of complicated. And if your plane is razor sharp hand planing 8 leg tapers might be simple...not in my book. Good upper body workout however.
haha you only see the finished product for a split second!
Didn't want to show that it's wobbly. Lol
J Leverett probably an uneven floor
Shoot, we need a video just for the tapered jig alone 🙄
There’s a reason Tommy chose 8 inches.
THIS guy loves his wood glue
I wonder if Kevin took off both sides of the end planks instead of leaving them eased over. Stay tuned... Yup. He did. And Tommy used a round-over bit that he still won't tell us the size. The smallest I have is a 1/4" That looks much smaller. Cagey bastard.
If it looks smaller than 1/4", what do you think your remaining choices are?
@@acerjuglans383 it's probably 1/8 then
You want simple? Give me a few 2x2s and a sheet of plywood
Animal Crossing in Real Life
I started with Woodglut plans.
This is ikea quality. Just screws and pocket holes.
Screws and pocket holes are fine if you don't use MDF, IMHO. It's better than Walmart at least.
It's real wood, that's the difference
ikea uses real wood in many of their products. they don't show much of the end results in this for a reason.
real wood is different from solid wood
Too much work for such a small project.
Etta James well believe it or not everything hand mad like this takes a lot more time than one thinks. That’s why some pieces go for a lot because a good hand made project will outlast anything machine made
Then just go buy one at Ikea. If you don't want to put time into making things, you shouldn't bother with woodworking.
But after you make the jig, you can make the 2nd one quicker
at 3mins he shows how to mark out the blank for a jig. He doesn't then show you how he cuts this out. Annoyingly, he doesn't even use this in his jig!!
It's too bad this segment didn't present alternatives to the (power) tools used to make this table (e.g., using a small hand plane to chamfer the edges of the legs, instead of using a router). For those who watch a lot of woodworking tutorials, it wouldn't matter so much, but for those who watch this and assume that there's only one way to do things, it's unfortunate.
hand made.. not made in china.. junk ..
I don't pretend to be an expert, but some of the things he did really annoyed me as not right. His glue up method for the top was terrible; I have NEVER seen anyone attempt to get a true flat result by just laying the boards on a table and squeezing them without a "call" board or similar. Likewise, just wiping the squeeze out glue off with a damp cloth is generally considered poor unless you plan to plane off all the glue you have now put on the surface. Even his sanding technique for that table top was poor, as he has no idea of if he sanded it all, as most experts put pencil marks on the surface to track where they have or have not sanded. If someone was going to stain the resulting table, there is a good chance the glue would keep it from taking stain evenly.
He does the round-over without regard to grain direction, so if he gets tearout on the end grain he has already rounded over the edge grain so he no longer can automatically fix that tear out.
All in all, very disappointing techniques.
Your advertiser is a woman who yells, could give someone a hart attack! Get rid of her!!!!!!!
If you really want to do WOODWORKING, GET RID OF THE POCKET HOLES, do some real woodWORKING.