Video Tip: Fusion 360 - Combine and Delete

Learn more on our website: www.synergis.com/cad
Synergis Engineering Design Solutions provides world-class technologies and expert guidance to inspire you to build a better future. In business for close to 40 years, Synergis has also been an Autodesk partner since 1985 - selling, training, and support tens of thousands of users of Autodesk design software. In short, we make it our missing to help you find better, more efficient, and more collaborative ways to use your engineering data. All to enable you to be more productive, get to market faster, complete projects more accurately, and be more profitable.
Talk to a specialist today at www.synergis.com/contact
See a custom Butt-weld Lateral Fitting being built and look at the Combine and Delete commands and how they work together.

[@Ilikeridin]

Excellent, just what I wanted. Just designing a small centrifugal pump and had no idea how to put the outlet at an angle. Thank you

[@SynergisCAD]

Glad it helped! Be sure to subscribe so you never miss another one of our tutorial videos, and check out the other Fusion 360 videos on our channel!

[@GPinaffiRodrigues]

Thank you for posting this video. I couldn't find and remove intersect bodies option. Cheers!

[@JosephColeno]

Very good tutorial. Get to the point, without wasting time in unnecessary explanations, it's very appreciated.

[@SynergisCAD]

Glad you found it helpful! Be sure to subscribe so you don't miss any of our future videos!

[@JosephColeno]

Synergis Engineering Design Solutions Already done. Thks

[@messageweek]

Thank you. I'm learning Fusion 360 and this was helpful. Much appreciated!

[@rfanciis]

Thank you ! That's what I was looking for

[@SynergisCAD]

No problem!

[@calvin-7540]

That is one of the most detail videos for tutorial videos！You have just helped me out，Nice!!!

[@SynergisCAD]

We are happy you found it helpful! Thanks for watching.

[@Epickberrygames]

I'm also just beginning my journey in modeling, and as in this case I thought I had conquered joining two bodies..... Three hours later and it's time to go to bed(it's only 3 am !!!!) . Thanks for the excellent help and a very well done presentation. My quandary WAS a "mixing elbow" for CFD project. Again, Thank You

[@SynergisCAD]

Thanks for watching and subscribing!

[@danfrankovic3413]

Simple drawing the way you show it. I learned a lot, Thanks

[@edwardsager7605]

You provided a solution to my problem. Thank you.

[@wakkowarner7391]

Thanks! This method will come in handy.

[@SynergisCAD]

You bet!

[@AN_Design_3d]

nice tutorial, thanks!

[@SynergisCAD]

Thanks for watching! We've added a bunch of Fusion 360 videos. Come on back and check them out, and subscribe so you never miss another tutorial!

[@fenders9911]

very nice learning more and more as i play with fusion 360

[@miguelquiroz1550]

Excellent! Thank you!

[@SynergisCAD]

You are welcome!

[@scottaero]

nice work Dave

[@SynergisCAD]

Thanks for watching!

[@valveman12]

Thanks Dave

[@jaapwijsman4422]

Jaap ; practical set up and good video explanation

[@jkiry]

Thank you! I have been trying to figure out a similar dilemma and this was the remedy.

[@SynergisCAD]

Excellent!

[@Precisioninfrared]

Thanks Dave. Straight to the point without fluff and boring nonsense in between.

[@NETSIRKENNYL]

Thanks for watching!

[@reddpill]

Awesome. So how does one go about using this file to make this pipe in the real world? Is this machined by a robot? Or is the file/cad drawing just used for it's dimensions?

[@D0WTA]

Question (not about the model but your peripherals), what are you using to turn your model like that without using the mouse?

[@MrOrangeman18]

Awesome thanks

[@SynergisCAD]

Welcome 😊

[@actualfactualfiction8351]

Can I combine a modeled T-spline form with a cylinder?

[@Olivsam]

I am learning 360,I have a sign I am designing with a graphic, I want to delete the graphic but it wont let me. I try to select it and hit delete but it doesn't do anything any suggestions?

[@05Petedriver]

I cannot get mine to snap to origin on the second set of circles. What might I be doing wrong

[@maxrybold1531]

Nice, but I would keep the bodies seperate since they are joined via weld (assmuing the parts are carried over to sims)!

[@uhohspaghettio9940]

thanks.

[@NETSIRKENNYL]

Thanks for watching!

[@jeanmichel3756]

hello wonderfull how to collect the data of the curve of intersection . i need to set a way to rule an utrasonic beam (xyz curve) thaks

[@life_motived_corey]

Could I possibly do this with letters?

[@airalakumar]

good

[@SynergisCAD]

Glad you found this helpful, Airala!

[@Mupshot]

thanks, that pesky combine feature for two bodies is hard to find

[@SynergisCAD]

Thanks for watching!

[@rhetth-s8082]

Is a fillet instead of a weld suitable for FEA?

[@SynergisCAD]

FEA is about the joint condition that's applied. Actual fillet and welds are not a consideration. In FEA, a simplified model is the key.

[@ArdiUtamaIDWGD]

how to delete combine (join)

[@thinkithink648]

wow

[@ELValenin]

good tutorial, but OUCH my ears