I swear Devin you have some talent I wish I had a little bit of lol. Your an awesome working guy. I learn something new from your channel every time I watch.
love your work, out of interest couldn’t you run all the shifter mounted wiring with the shift cable and have the connectors close to where the shift cable attaches to the trans. it could still flop out of the way or all be disconnected to remove it. there’s probably something i’m not thinking of.
What video do I watch to see how to properly measure wire length? I’ve cut so many wires too short or too long there has to be a simple method I’m just unaware of.
@@MPHMayhem I’ve been cutting wires the wrong length since before the internet was invented! And watched 90% of his videos. He’s gotta have a simple method here somewhere I understand that, I’ve just obviously missed it.
Use a cloth tape measure for sewing they’re flexible Take your measurement then add 10 percent What you don’t see in these videos is the wire that gets cut off and thrown out cause it’s too long, cause it’s a lot cheaper than being too short
Off topic but does anyone know what combo of hemi smart coils can be remote mounted with plug wires instead of direct mount to the heads. I have a benz motor with dual plugs which im trying to convert to smart coils but still utilize both plugs. Im trying to move away from stock "dumb" benz coils with holley dumb coil drivers. I found kits for hemi wires but unsure if they will work with the holley hemi smart coils.
Your wiring truly is artwork very few handful of people doing this quality of work on these cars
We did the monocord the same way.
It makes it really nice to street drive it.
Crazy amount of wiring and sensors in this car... to make it look that amazing is unreal man
Beautiful car
I swear Devin you have some talent I wish I had a little bit of lol. Your an awesome working guy. I learn something new from your channel every time I watch.
Thank you for the kind words.
Next level man. You inspire all of us
Great job coming out superb
Y'all REAL GOOD AT WHAT YOU DO !!
Will definitely be a nice piece when ur done can't wait to see the finish product great job 👍
Thanks for another great video!
Nice work. Excellent investment by the owner.
Pretty work Devin!
Thanks Devin always appreciate your time bud hope you and the family have a great week later
Wow love the 1/4 turn disconnect by the shift idea!!! Nick just do what Devin suggests, time and money saved by doing it correctly the first time!!
Absolute Top Quality 👌👌
Extremely nice stuff here 🥵
for holes assuming you have access to both sides, greenlee knockout tool is superior. No chips or burrs
Could you give us a quick video on Tefzel vs TXL wire differences, and why you use what you use?
Thanks Devin!!!!
I don't know if you have ever looked at the Carling V-Charger USB? Same hole shape as the V-Series sealed rockers
👍👍👍
I would like to see how you tune the multi-selector switch for MAP in the Dominator.
love your work, out of interest couldn’t you run all the shifter mounted wiring with the shift cable and have the connectors close to where the shift cable attaches to the trans. it could still flop out of the way or all be disconnected to remove it. there’s probably something i’m not thinking of.
Not really in this scenario
Maybe grind the bolt head down to fit the motor plate.
Even a button head with the sides ground down won’t fit
Will those lights be ok that close to heat
What video do I watch to see how to properly measure wire length? I’ve cut so many wires too short or too long there has to be a simple method I’m just unaware of.
Go back thru his videos and just watch them all to learn. Well worth the time. He did a video on it too
@@MPHMayhem I’ve been cutting wires the wrong length since before the internet was invented! And watched 90% of his videos. He’s gotta have a simple method here somewhere I understand that, I’ve just obviously missed it.
Use a cloth tape measure for sewing they’re flexible
Take your measurement then add 10 percent
What you don’t see in these videos is the wire that gets cut off and thrown out cause it’s too long, cause it’s a lot cheaper than being too short
@@theholleyefiguycloth measuring tape & add 10%!! Beautiful!! Thank you 🙏
Why not use the stock headlight switch location in the dash?
Seat is set back pretty far in car and can’t reach it
What led strip lights do you use on the cars?
Beautiful work! How many hours would you have in the wiring up to this point?
I think around 60-70 I would have to check my excel sheet
Who built the car?
The main chassis was built at Pentagon Race Fab in Syracuse, NY. I brought it home and finished it at my shop.
Those engine compartment lights will survive right next to the headers like that?
There’s about 2.75 inches gap
I think they’ll live
But we will find out
Headlight swight on the dash like oem?
Can’t reach it from drivers seat
@theholleyefiguy ahhh need one of those grabber claw thingys! 🤣🦾
Off topic but does anyone know what combo of hemi smart coils can be remote mounted with plug wires instead of direct mount to the heads. I have a benz motor with dual plugs which im trying to convert to smart coils but still utilize both plugs. Im trying to move away from stock "dumb" benz coils with holley dumb coil drivers. I found kits for hemi wires but unsure if they will work with the holley hemi smart coils.
A standard smart coil being remote mounted with just the old style Hemi or coyote plug boots should work
Bad apple 🍎 updates
Wont he need that trans brake button to back up on the street?
Nope
1st!
why? the point? want a cookie?
@@ryanr2n2yc just to make fools like you comment
What are those led strip lights? brand ? where do you buy them?
Amazon
They’re the waterproof led light strips from under trucks and truck beds
They’ve worked the best out of all the ones I’ve tried