Review and installation of First Alert 9120B

Sdílet
Vložit
  • čas přidán 18. 06. 2016
  • Review and installation of First Alert 9120B6CP 120-Volt Wire-In With Battery Backup Smoke Alarm, 6-Pack available on Amazon.com
    amzn.com/B000KKHWLU

Komentáře • 38

  • @scattjax3908
    @scattjax3908 Před 6 lety +7

    Great video for people with only one hand.

  • @justdoit54321
    @justdoit54321 Před 4 lety +12

    You skipped the wiring steps.

  • @scattjax3908
    @scattjax3908 Před 6 lety +2

    Love the relaxing music, although sometimes it sounds like there's an alarm far away.

  • @robinblanke2928
    @robinblanke2928 Před 4 lety +8

    The wiring part is the part I need to see and the only part not shown; not helpful.

  • @supersal0135
    @supersal0135 Před 5 lety +5

    this is like watching paint dry

  • @bigkitty1779
    @bigkitty1779 Před 4 lety +1

    The 4120 alarms are my favorite

  • @Mattiimateo
    @Mattiimateo Před 4 lety +1

    Thank you for this video!!!!🙏🏻

  • @chrisl3550
    @chrisl3550 Před 5 lety

    Did you use the new wiring provided with the new alarm or did you use the old ones already wired in the ceiling?

  • @robertwalker9679
    @robertwalker9679 Před 5 lety +1

    I can’t get mine to lock into the bracket for some reason it’s very frustrating

  • @mxpx532
    @mxpx532 Před 3 lety

    Do you know why my alarm would not be a constant green the alarm went off in the kitchen and I wasn't able to reset it so I replaced the battery and now instead of a constant green it blinks green about every minute

  • @elemeniah
    @elemeniah Před 7 lety

    Thank you for taking the time to show this, appreciate it!

  • @justin_wayne_elrod_jrod

    I'm guessing you can't use the same bracket that 4120 was on that what I'm assuming since you took that bracket down put another one up

  • @tomc8617
    @tomc8617 Před 4 lety

    I took the backup battery out of my hard-wired smoke alarm because it
    started to chirp (once) every minute or so and wouldn't stop, and I
    don't at this time (now 5AM!) have a fresh battery to replace it with.
    Yet it's STILL doing it, without a battery even in it! Would it warn the
    same for a missing battery as for a weak or dead one?

    • @safetyzone2962
      @safetyzone2962 Před 3 lety

      Yes, if there is no battery it will chirp. If you replace it and it still chirps, disconnect it, hold down the test button for about 30 seconds, and then put the battery back in.

  • @vongerlachter
    @vongerlachter Před 6 lety

    If you don’t have the hardwire connections, will the 9V battery be enough to power the alarm?

  • @trifectawinnings7755
    @trifectawinnings7755 Před 5 lety

    I was very pleased with your video. You kept your hands out of the way and let us see what you were doing. The only confusion I had was when you showed the other wires giving me the impression that I had to actually put the thing together. My only question is do I need to turn off the power source before doing what you ultimately did: replace the unit?

  • @timothyyocham7804
    @timothyyocham7804 Před 3 lety

    G sounds like we're going to a funeral or something

  • @tylin168
    @tylin168 Před 4 měsíci

    a pity that from 3:23 on, it wasn't a close up (for viewers with absolutely no experience but need to know how to install this)...

  • @jhernandz80
    @jhernandz80 Před 3 lety

    What happens if i don't wire it up?

  • @131200fantasma2dj
    @131200fantasma2dj Před 4 lety

    hola amigo tengo esos detectores de humo me podria neseñar como de calibran o se programan o no tine calibracion gracias

  • @stevenwalters955
    @stevenwalters955 Před 3 lety

    This isn't a installation video, it is a replacement video. No Wiring?

  • @ariannadamian1955
    @ariannadamian1955 Před 4 lety

    1:25 means no battery signal

  • @kristalwoodbeck544
    @kristalwoodbeck544 Před 4 lety

    Great!!! Thank you.... I was able to do it just like you showed!!

  • @larsafety7975
    @larsafety7975 Před rokem

    What is the name of the song

  • @zoedoodle9824
    @zoedoodle9824 Před 3 lety

    And no info about the lock pins . . .

  • @mikesanchez1403
    @mikesanchez1403 Před 4 lety +1

    You lipped the wiring and don’t say it used same connectors cuz some ppl had a cheap and different SD on there and need help with the wiring that’s the whole reason ppl watch the other stuff you did a child can figure that out if your gonna help ppl out show everything not half of install

  • @bobcleghorn
    @bobcleghorn Před rokem

    HI

  • @huffy1949
    @huffy1949 Před 7 lety +7

    Useless.

  • @jacksonoffical
    @jacksonoffical Před 4 lety

    slow video

  • @lynettefisher6052
    @lynettefisher6052 Před 6 lety +2

    What a load of crap this product is

  • @michellepolini4924
    @michellepolini4924 Před 3 lety +1

    Sorry, but music was annoying. Stopped watching