Intellitronix.digital dash

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Intellitronix.digital dash installation in a 1979 Corvette.
    Recorded over several days as you can tell from the 6 clothes changes.

Komentáře • 13

  • @samuelbrown3217
    @samuelbrown3217 Před rokem +1

    Every video I watch of the installation. It do not show how to wire up the system. It only shows a few wires that sucks

  • @Intellitronix
    @Intellitronix Před rokem +2

    Geat Video!! May we share this video on our social media?

    • @billsonecargarage936
      @billsonecargarage936  Před rokem

      Sure thing. I know it is not thorough instructions but it should help someone.

  • @marki336
    @marki336 Před rokem +1

    For the Speedo panel, did you have trouble putting the top shield plate back n. I can’t get the bottom clips in with the dark plate and the original plate. It ends up being to thick if that makes sense.

    • @billsonecargarage936
      @billsonecargarage936  Před rokem

      The blue tin piece that holds the gauges does not need to go back in. Back plate, circuit board, tint plastic and then original clear lens

    • @myceliumforall619
      @myceliumforall619 Před 11 měsíci

      ​@@billsonecargarage936I believe you are referring to the oil, clock etc gauges. But I'm having the same fitment issue with the speedometer panel. The plastic makes it impossible to fit. Please help

  • @myceliumforall619
    @myceliumforall619 Před 11 měsíci

    Im restoring a 79 Corvette and im doing the upgrade as well. The issue im having it that the plastic cover makes it impossible to fit. for the speedometer and the RPM meter. Could you advise please. Btw thank you!, this is helping me go through the install process perfectly (besides the fitment issue im having)

  • @kaelenstarrs7362
    @kaelenstarrs7362 Před 9 měsíci

    Cna you show how you attached the dimming wire please? This video has been very informative.

    • @billsonecargarage936
      @billsonecargarage936  Před 8 měsíci

      The dimming wire was connected to the parking light lead from headlight switch with a wire tap connector as per instructions.

  • @judeverge
    @judeverge Před rokem +1

    We are gunna need to see a short drive now that it is warming up.

    • @BillEisnor
      @BillEisnor Před rokem

      Sure thing. Just waiting for a day without rain.

    • @billsonecargarage936
      @billsonecargarage936  Před rokem +1

      czcams.com/video/PusOwnEtWKw/video.html&ab_channel=Bill%27sOneCarGarage
      New Video is up. Thanks