5 Ways To Hang ANYTHING From The Ceiling! (SUPER STRONG...Easily Hang 100+ lbs. From Ceiling!)
Vložit
- čas přidán 22. 05. 2024
- Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Toggler 3/16" Anchor Bolts 10 pc.:
amzn.to/3EiANLb
Toggler 1/4" Anchor Bolts 20 pc.:
amzn.to/3Z011dq
2-1/2" Eye Ring Screws:
amzn.to/3Iv7zvc
2-1/2" Screw Hooks:
amzn.to/3S7Dt3T
3/8"-16 Threaded Rod:
amzn.to/3Iv8awW
Dewalt 20v Drill + Driver Combo:
amzn.to/411Ri8e
Stanley 25' Powerlock Tape Measure:
amzn.to/3k8t6QM
(PLEASE NOTE: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
Check Out Our Other Mounting Videos:
Always Bracket Studs:
• Hanging A Heavy Mirror...
Nails Vs. Screws:
• NAILS vs. SCREWS...Whi...
Best Drywall Anchors:
• These Are The BEST DRY...
Nails That Act Like Screws:
• These Nails Act Like S...
5 Strongest Ways To Hang ANYTHING From The Ceiling! (Easily Hang 100+ lbs. From Ceiling!)
When it comes to ceiling mounting, I don't like to take chances. This short video from The Honest Carpenter will show you the 5 STRONGEST ways to hang things from the ceiling!
Typical plastic expansion anchors, even self-drilling plastic anchors, aren’t strong enough to hang things from the ceiling!
They rely on compression within the drywall or plaster itself, and the TENSIONAL FORCE of gravity is too strong for this type of connection.
Instead, I like to at least use TOGGLE BOLTS...and the newer TOGGLER-style bolts are even more convenient.
If I need to hang something over 10 lbs. from the ceiling, I’ll often FIND A JOIST to hang from instead. Joists are the framing lumber in our ceilings and floors, and it’s extremely strong. You can easily hang over 100 lbs. from a joist with the right hardware!
If I can’t find a ceiling joist where I need one, I may install BLOCKING from above in the attic. Or, I may cut open the drywall and install it from below.
If you don’t want to install blocking pieces, you can also add a surface cleat to the underside of the drywall, and mount screw hooks or eye hooks into the cleat.
And, in some rare cases, you can hang threaded rod from a framing member above the room, and mount things to the underside of the threaded rod with washers and bolts.
Thanks for watching!
The Honest Carpenter - Jak na to + styl
One caveat about cutting the drywall and insetting the cleat: In a garage or a condo or apartment, the drywall is fire-rated, so you don't want to cut holes in it.
You explain things so clearly! I really enjoy your channel. Thank you for all your hard work.
Thank you, Neolithic! 😄
3/4 million subs, here we come!
I agree 100% with your comment "explain things so clearly" this is my favorite channel.
Agreed
The fact that you had a mock ceiling was so awesome. Thank you for breaking things down so that even the beginner can understand! Your channel is awesome. Keep em coming
WOW! I have watched a trillion “helpful” construction/carpentry/etc videos and this one has got to be the most thoroughly explained that I have ever seen! This is TRULY helpful and I am so grateful I found you!!!!
Thank you, Lauren! I’m going to have a lot of stuff like this in my first online course later this year. Full builds that explain all sorts of carpentry concepts. 😄
A tip for fixing drywall if you cut where there's no backing: use drywall clips. They saved me when I replaced my bathroom fan and there was absolutely nothing to attach drywall to and no easy way to fix the ceiling from the attic.
And a tip: if you drill into the ceiling and don't get sawdust, you're not drilling into a ceiling joist. I was hanging an antique lamp last week and my stud finder lied to me.
Good advice, Lori!
Drywall clips are new to me. Thanks for mentioning them.
In my house I get wood chips or sawdust wherever I drill in the basement or first floor ceiling, those are filled with it for insulation and noise reduction, yey for old school construction!
I've used those before on a vertical fix, over some pipes. It's seamless if done right. You'll still need to use a copious amount of mud.
@@savageredbeard Molding would look nice on a ceiling to cover up any imperfections.
Finally somebody smart on the Internet, thank you!
Absolutely loved the clear instructions with the demos. Thank you so much for making this video!
Yeah Option #2 is definitely my favorite Method. I had to hang a ceiling fan and I wasn't comfortable until I found a Soild Joist stud to hang it from. 👷🏿
That’s how I always feel, W!
🙋♂️THANKS ETHAN ,WE APPRECIATE ALL YOUR EFFORTS TO HELP OTHERS WITH PROJECTS, in an easily understood way 🤔 GLAD TO SEE YOU HANGING IN THERE 😁👍💚💚💚
Oh my gosh, thank you for this!!! Option 5 is exactly what I needed to see for our weird ceiling situation! (Drywall overlaying old plaster and lath, with a heavy chandelier being installed in between joists) This is fantastic!
I’ve gotten over 25 ideals from different people and your video was the best. Thank you.
For my autistic sons swing, I put blocks, 3 on their side, screwed them together and through the joists on the end, then I put some particle board over the top so the load is spread not just on the screws holding the blocks but also across the top of the joists.
I know I went overboard, watching that has made me realise that, but I’m happy too especially since my father in law told me I did it wrong at Christmas.
I go overboard with just about everything, rather have too much support than not enough.
I don’t really leave comments on CZcams videos but that was one of the most clear, well-explained DIY videos I’ve watched. Thank you.
This is really a great instructional video! I randomly came across it via an outside link, and am now subscribed to your channel. Information like this is already important for safety, too often ignored, and it’ll only get more needed as people keep downsizing and optimizing their living spaces. I’m sure you’ll just keep getting views and likes on posts like this one.
You explained and gave visuals at every step!! You deserve a gold metal 👏🏾👏🏾👏🏾. This is literally the only video I found with great detail, education and no fluff. ’m purchasing and installing a heavy bag for my 10 year old in our home and was unsure of how to do it. I feel very confident after watching this. Thank you!! I just subscribed
By far this is absolutely the best Best video I seen. Thank you 🙏🏾
I've been thinking about adding a ceiling-mounted pots and pans rack in my kitchen - this video will definitely come in handy!
Good video. Might I suggest when adding blocking. Feed a zip tie through the pilot hole to make it easier to spot. Since most attics don't have the best lighting.
I have an awesome idea for hanging multiple hanging plants and grow lights from the ceiling, but was sketchy on how to support the load. I started doing a search but couldn't seem to find the right wording to get the answer I was looking for. Your video was spot-on and answered all the questions I had about how to properly support my project. Thanks so much! I have subscribed and looking forward to seeing other videos in your playlists. 😎
I love the way you teach.
I have screwed those eye bolts /screws and always used pliers to grip it and turn. You showed me the best way is to stick the screwdriver through the hole and easily rotate. Thank you so much!!!
This video came at a great time when I’m going to hang a work light in my garage over my chop saw. It’s not heavy but I want to make sure it’s supported so it doesn’t come down on my head. I can’t see the numbers on my old saw so a light was really needed to get proper measurements. Great options for me, someone who doesn’t normally do this. Thanks!
Always solid straight to the point honest tips! Appreciate you buddy!!
I love how he explains everything. I’ve learned so much from him. I am ready to start adding more storage in my garage. I feel confident that I can do it.
Thank you, Andrea!
This video is SO HELPFUL!! clear, easy to understand! I very much appreciate you and your channel! Thank you!!
I am really thankful for this video, it was so helpful and inspiring to me who was always curious about how a lot of things hang seamlessly in interior design, now I gotcha 🙏👍
Another great video. I like that you explain things in a systematic way with many examples. The pace is also very good.
Thank you, Tommy! I appreciate the feedback!
This was really helpful, I'm trying to mount a Monitor in my office and I don't want visible cabling so these options will definitely come in handy. Thank you!
All good stuff. Never new about notching drywall to make a board more flush....filing that away for future use
Wanted to add an additional note about using the toggle bolts with the plastic snap-off guides - I've seen a lot of negative reviews on them from customers at Home Depot and other big box stores.
The truck up using them successfully is to actually engage and disengage the swivel mechanism several times (CAREFULLY so as to not snap the plastic) to make sure that it can swing into the open position more easily once you slide it into the hole you've made. I've gone so far as to add a little bit of lubricant to the hinges. What I've found is that the dust and grit from drywall, sheetrock or plasterboard can get into the contact areas and make it difficult to swing the metal toggle into position once you've got it inserted all the way.
Those fancier toggle bolts are not cheap so if you've got to use a bunch of them it pays to make sure you've got them in correctly. I also err on the side of gently jiggling it a bit more to ensure that it's properly placed rather than brute-forcing it because the plastic guides are super fragile if any kind of lateral force is applied to them.
But once they're in they work perfectly. I have 2 supporting a protector and another 2 for a motorized projector screen.
Building a big acoustic treatment cloud to hang in my studio and this is so helpful. Detailed, but brief and the to the point. Thanks so much!
same here lol
Very informative video. It was just what I was looking for too. I want to create a shelf that I can raise and lower in my garage by winches for extra storage space in my garage. This was perfect for explaining how I could securely hang things from the ceiling. Thank you
Excellent and clearly laid out. Thanks!
Thanks for your time/effort Ethan. *God bless.*
I always learn something from your videos. Thanks
I used to attach rail to the ceiling and attach a hoist to move a person out of bed and into a wheelchair or down the hall. My preferred method was a U Strut and your threaded rod method. Very good video. Thanks
This was a very helpful video. I appreciate you giving us so many different ways so ee can pick the better opinion for individual needs and or skill level
I used option 5 to install storage in my garage. Thanks for the video and tips.
Excellent video! Thanks man
This is probably extreme overkill but when I hung my heavy bag and gymnastic rings for my home gym I used a 4x4 as blocking and screwed 6” lag bolts through the sides. Then I used through bolted some fairly thick eye bolts using large washers. So far it’s been pretty solid.
In one thousand years, archaeologists are going to find that setup and be able to infer that there used to be a house around it.
Thank you for the 5ways to do this safely. I got my first Dungeonworld book. I liked it, & will try get the next. I intend to get all and eventually donate to my library for kids.
Some brilliant ideas there
I did learn a few things here in this video, awesome, thanks
You. Have. Read. My. Mind. In a great way. I have lots of things I'm wanting to hang to use vertical space. Most are plants, which can get heavy. And most spots I can to hang them dont have joists. Its been driving me crazy having these projects unfinished. Ty! Perfect timing!
Thanks Ros! I bet you can get away with just toggles for most of those plants. You can even hang wire from two toggles! 😄
You just fix my problem! Thanks my guy !
Great stuff as always...I've used Raco braces for a lot of ceiling fans now as well as some heavy-ish lights...the Raco's are actually a very strong solution PROVIDED they're installed right...I hung 140 lbs. on one once just to test it and it didn't flinch a sixteenth of an inch...most 52 inch ceiling fans feel like a ton but they actually run like 18-25 lbs fully installed
How lucky am I to have found your channel! Thank you google! This was the best explanation, and you got right to the point. Great illustrations and organization of how information is presented. I also like the “better safe than sorry” approach. Very responsible.
I’d say you must be a great carpenter but you’re also a great teacher as well.
Thank you! 😄
Tks. Never stop learning and I learned something today.
Very useful and clear instructions. Thanks.
Thank you so much for this video, I’ve been wanting to hang an 80 pound boxing body bag in our garage but wasn’t sure if the joist would hold, this video made me confident it will. Also Dewalt impact drills are the way to go, totally worth the money, plus Star Bits and screws to match. Love your channel!
I'm putting up a punching bag too and I was nervous about the same thing
A lot of newer construction utilizes I-joists or truss joists. How would you approach hanging, for example, a suspended storage rack in a garage with those types of joists?
I know so little about ceilings, learned a lot!!! I literally just used one of those toggle bolts few hours ago to hang a plant lol
Thanks Ethan! This was so much easier to understand!
Thank you so much! I'm subscribing right now!!
All very good suggestions. I'm always nervous about the weight-bearing capability of ordinary fasteners in drywall alone - these ideas will let me sleep better!
This was super helpful. It’s all about finding the joists/studs, which I suck at even with all the tricks. When in doubt cutting out a big piece of drywall, locating the joist and patching it up when done is my go-to. If possible, I’ll install a small 2x4 piece around the perimeter of the hole so I can screw the piece back into place before patching it up. It’s a pain and leaves a mark, but it’s the safest.
just what the doctor ordered.
this is a life saver! 👏
Great video, thanks for sharing 🙏
You are an awesome teacher. Great stuff as always 👍
Another Excellent Verbal and Visual Demonstrations!!!
Nice review of all methods. Thanks.
very clear and helpful ty
Thank you! This was extremely helpful!
Thanks for the information! I've used #1and #3 before. Very helpful
Man, how you manage to create such a great videos each time! Thank you
2 options I didn’t know, or think of!!! Great content, truly thx!!!
Thanks! I have a tiny room and I can't spare the space for a solid chair. So I am looking at hanging a fabric and rope chair from the ceiling. Option 3 sounds good. I think I will use blocking twice and spread the load out over two anchor points.
All great ideas and project ideas and solutions
Love your videos, so glad to find you! 👍😆👍
Very informative. Thank you. I need swing hung and I really enjoyed your video.
Once again Honest C….another great video brother! You rock! 💪🏼👊🏼
The cleat system worked great for hanging things in my garage. Looks didn't matter too much so I put up a couple 1x2s cross wise to the joists giving lots of flexibility for the things I wanted to hang today plus the things I will want to hang later (whatever they are).
Liked and subscribed. Didn’t feel like 8 minutes and now I’m ready to hang a heavy bag in the garage.
Thanks for this. Great ideas.
Thank you! Exactly the kind of information I was looking for.
Thank you Ethan for another great video.
I Love and Trust your videos on your channel. You do a great job explaining and instruction!! Keep up the great work!!!
Also:
I am not a carpenter like our friend here. Hell,. I worked on engines in the military, and then went to college to work on finance as a career. But I am a heavy DIYer, as I have spent years fixing up my own distressed foreclosure purchases that I have lived in. So here is what else I will add:
Before you do anything else...right now...before you pull out your next power tool: learn to drywall. It is not hard. Once you learn, you can do it before you get any experience to get better at it (you just have to sand more at first). But once you have the confidence to cut open a wall, EVERYTHING you need to do becomes 100 times easier.
Thanks! Exactly the information I was looking for!
Great to hear, String Theory! 😄
This was very helpful!! Thank you 😊
Ok I'm really glad my first attempt failed early enough I didn't hurt myself 😂 I definitely needed to do research before trying. This is perfect! I'm gonna watch that video about framing the joist too and actually set my swing up right lmao thanks!
That was awesome!!! Thank you 🙏🏼 can’t wait for the HCU🎉
As always, well explained.
You da man.
Beyond helpful! Thank you
I always enjoy your videos. Thanks for the info.
I’ve often had to attach some blocking for an electrical box that will carry the weight of a ceiling fan rather than just a ceiling light. Good video as always
You never know what future light fixture or fan will be placed on that box later.
@@dwayne7356 Exactly! I wish it was standard for places where it is a reasonable probability. That would keep me out of those attic spaces, lying on my belly putting in blocking!
After my framing was closed in, I had an idea where lights & fans would be hung plus wall mountings for TV's, cupboards, etc so I applied bracing beneath the wall covering. Thanks for the video.
I can't thank you enough for this video, but I'll try. THANK YOU! BIG HELP. I appreciate your time put there to share this knowledge with us.
Thank you for watching, Marcin!
This was a great video, it's definitely a topic worth discussion.
Great as always Ethan....Thanks
Great tips Ethan, thanks.
Holy cow this is a great video! I'm so happy I found it. Thank you!
Thanks Ethan!!! Always So Helpful!!!! Much Appreciated!!!!
Thank you. I have a couple places where I need to rework the ceiling lighting and I've been postponing it partly because of not knowing how to approach it and having no almost no experience with making adjustments to existing drywall installs.
Stumbled across this video looking for some suggestions for some attentional projects, good job! Moving recently to South Florida, I've found that folks confuse joist with trusses. Trusses are used nearly exculsively on new builds and folks don't under stand that the bottom load of a truss is drywall weight and nothing else. Without some extensive reengineering of the ceiling support you can't hang squat.
Thanks, Ethan, great video, as always!
I've used a board to spread very light loads over a plaster ceiling, but prefer supports to be many times stronger than necessary so usually attach to joists. However, more often than not the desired position isn't aligned well with a joist, so I employ a variation of option 3. Instead of screwing a single piece directly to the joists, I screw a block of 4x2 on each end of a bridging member, and then screw the side blocks to the joists with the bridge touching the ceiling underneath, ready to attach the fixture. This way I have screws embedded in lots of material, and all through face or edge grain. I'm only a DIYer so a little more time and material isn't an issue.
Perfect, everything I needed to know. Figured that I needed (wanted) to do the blocking approach but wasn't sure the best way to attach (end screwing vs toenailing). Thanks for covering all the options with clear, comparative explanations and the guideline load numbers for each.
thank you ethan!
Dude, this is the best video I've ever seen on hanging stuff from a ceiling. You are a master at explaining super useful techniques in a quick, complete way that makes it possible for amateurs like me to feel confident in considering all the options and knowing why and how to do a job a certain way. Creating the fake ceiling in your workshop to SHOW your work is genius.
Btw, a few years ago I helped my daughter move into an apartment with limited space and needed a way to hang her bike in a closet with a plaster/lath ceiling. I eventually came up with something resembling the surface cleat idea. It worked, but I wish I had seen this video first to think about how/where to best install the cleat. I didn't think about installing it on a diagonal. Duh. That would have helped me. Next time I'll know!
Thanks again!
That’s awesome to hear, Alan! I really appreciate the positive feedback. Thank you for watching and writing in! 😄
Great video and useful information. Thank you for posting!