I use the same ET 4800 and i use the Asub paper and my prints come out just fine. when i try and print with DTF paper my prints come out with pizza wheel marks. i have tried to mess with the settings and still same results. anybody know a fix for this or a good setting to stop the wheel marks?
Oh no! Unfortunately I have not had any issues like this so I don't know that I can be of any help. However, I will pin your comment to the top and hopefully someone else will see it who may be able to help!
Thank you so much! I came across your channel while looking for set up for sub on my E4800 & I chose your video & I really like the way you explain but don’t take up unnecessary time! You have such a sweet spirit about you so with that being said I liked, subscribe & shared with my fellow beginner girl friends!! Happy Subbing & thank you again for your help! Stay humble beautiful!! ❤️💕
If you leave the silver seal on the ink and poke the edge with the needle, you can lay the ink on its side slightly elevated to extract the ink mess free by inserting the needle, using syringe as normal. I then used masking tape to tape the needle and syringe to the bottle of unused ink and put the cap back on the needle so I don't mix the needles up. In manage printer you can also rename it Sublimation Printer or something so you know it has special ink and not to confuse with another printer.
Thank you for the walk-through. You were very clear concise and straight to the point. Any questions I had you answered them all. I subscribed and I like your video. Thank you!
I'm not sure if I installed my printer correctly, I say this as I can't find the section in manage settings where I choose the paper settings. What I did was I linked my printer to my laptop via wifi? Was that incorrect? I do not javelin a cromebook only a Lenovo but of course I have and use crome as my browser. Not sure what I'm doing wrong.
Imma gonna level with you here, I just override the printer by hitting "ok" to proceed "with paper loaded in back of printer" I just do that each time I print. Which works because I don't keep paper loaded, that way noone can accidentally print to the wrong printer and waste my materials 😅
I just discovered your video and love the way you explain things! I just bought a used Epsen 4800 for a great price and it's in perfect condition. the guy we bought it from explained almost everything the same way you did. My husband and I are just starting our sublimation journey. The one question I have is, there is ink in the tanks from when we bought it and we want to top it off. Is there a special way to do this or should we just fill the syringe half way? Any help is appreciated!
Thank you! 💕 I am so sorry that I am just getting back to you. Life overwhelmed me recently! I hope you got this figured out! As long as the ink that was already in the printer was sublimation ink, and you had the same kind, then you should have just been able to add to it! On mine I can see, for the most part when it is getting full
Can you PLEASE HELP ME! Anyone?? I feel like I'm inside of an abstract splatter painting! I'm using the same printer and the exact same sublimation ink also... and there is ink EVERYWHERE! No matter what I do... the stopper on the syringe (what keeps it sealed when tipped over to fill)...KEEPS leaking EVERYWHERE! I tried the other color bottles and a different syringe and it just keeps leaking EVERYWHERE when tipped! (2 other people tried with me and it still leaked) Can you PLEASE HELP ME! I feel like I'm inside of an abstract splatter painting!
Do you like the size of prints you get? I see this one prints 8.5 x 11. I have seen many people getting sub printers that do 15 x 17. Would you say the 8.5 x 11 is large enough? Thank you. Thinking of getting one and can’t decide.
So far, this size has worked well for me. If I need a larger size, I will have to cut/puzzle them together. I will say, if you plan to do tshirts, you may want a printer that prints larger sizes, to say yourself some work. I, however, don't have plans to to many shirts. This printer it capable of printing longer paper! I've used legal sized paper in it, but I do believe it can do even longer than that. However, 8.5 is the widest it can go. I hope that is helpful! 💗
I felt the same way. I think any of the EcoTanks are a safe bet, but then you'll just need to take your budget and how large you want to be able to print into consideration.
Hey! It is called micro piezo heat-free technology! "This does not require heat in the ink ejection process. Instead, pressure is applied to the Piezo element, which flexes backwards and forwards firing the ink from the printhead." It is important because you don't want the ink to receive heat until it is being pressed. 💗
The ink that I have linked is what I have been using since I purchased the printer and I haven't had any issues with it! They don't physically list the 4800 model, but say it should work for all spdon ecotank systems.
Very helpful. This will make it much easier. I also have a question I cannot find sublimation ink specifically for the 4800 model does it matter which model it is I do have a 4800
I'm happy to hear this is helpful! From the research I did, it is my understanding that they lost the most popular ecotank printers in the title, but most of the sublimation inks will say somewhere in the description "works with all ecotank printers". The 4800 is a newer version so it isn't listed many places yet. I can't promise that is 100% true, but just what I have found. I can tell you I have had no issues with the sublimation ink I purchased! It is linked in the description if you wanted to check it out.
Can i use this ink for regular printing i print i print documents and if water falls on the paper it gets smudged and then the document is trash because I can't read it. Any insight welcome
You cannot. Full technically if you really needed to print something for a temporary print you could. However, sublimation ink is not made for everyday printing news and it will diminish over time, and always look faded, and subject to smudging, until pressed. Sorry, dear!
So I started to use the classic printers jack and I'm struggling with the needs so I purchased the auto fill, it's the same ink so I can mix it correct?
It sounds like it is a setting problem! Double check that your settings are correct, and that the program you are printing from isn't overriding your settings! If nothing else, turn it off for a few seconds and turn it back on! It could simply need a reboot! 💕
I am so sorry about my delay! I've been moving and unable to keep up with responding! I am out of town, so I can't look at my manual right now. However, I pretty positive the largest it can print is 8.5"x17"
The ink did come with the syringes! However, I can't seem to get an answer for shelf life after opening. I submitted the question on Amazon to customers and the company, but haven't received a response.
Help- what setting would I use for ultra presentation paper? Would ink jet paper work? I’ve tried regular presentation paper but murky colors :-: this printer has had me frustrated for a bit so hoping u can help :-:
I attempted to research this a bit, since I am not familiar with watercolor paper. Unfortunately, I wasn't able to find much information. I'm very sorry! I know it can be thicker, so I'm really unsure on it it will jam or not.
I have this printer but my USB and needs it for his work so I don’t see how I would be able to switch out the ink. Can you use sublimation ink with normal printer use and also making stickers?
Sorry about my delay! I was on vacation! Unfortunately, once you convert the printed to sublimation, it can no longer be used to typical use. They strongly suggest not switching the inks back and forth because they will get contaminated, and you would have to learn how to flush the entire printer to clear the previous ink. The sublimation ink is not meant to last long term, but i have used it a few times, in a pinch, for a couple things that I just need printed that I knew would be thrown away soon. The printed image is also very dull because the "true" colors don't show up until they are heat released by the press! I hope this is helpful! Happy to answer any other questions you may have!
I'm so sorry, I don't know the answer to that because mine was brand new when I set it up. I know you are supposed to flush the ink lines to avoid cross contamination, but I have no idea what that process is. My apologies! Best of luck!
I haven't looked for anything outside of the paperwork that came with my inks. I'm sorry you aren't happy with your colors. Have you gone into the advanced custom settings? I had to edit a portion of this video bc I forgot to include it. You can find specifics of what I'm talking about in my description.
From the Amazon link in my description, it's say approximately 11lbs. I am assuming that is package weight, not printer weight. Sorry, that's the best I can do as I bought this months ago.
I am trying to do sublimation tumblers, and I am having trouble with the borderless setting, do you have any suggestions. Also, my colors are cmybk, do I change it to rbg?
Though different inks may give you different instructions (see the paperwork that comes with the ink you purchase) there is a setting you need to make to give you beautiful colors! If you are sure, you could print on the two different settings and see which works best for you! In you printer preferences, go to "more options". In the "Color Correction" section, select "Custom". Hit the "advanced" button. Select "Color Controls" and change the "Color Mode" to "Adobe RGB"! Hit "ok". This makes a HUGE different in the print color and quality! In this video around 8:15 I walk through it! if you happen to be a visual person like me! czcams.com/video/1_fd7Z6drYA/video.html
Hi! In another video you did you talk about changing the drivers for better sublimation printing with these printer. I have the same printer and I was wonderig if you know the correct settings, please? Also it's interetig to see that your printer preferences and mines are completely different. On my printer display I dont get the mirror image option. I don't understand why
I am currently out of town, so I am unable to pull the paperwork, however, I did write everything out in full detail in the description! Could you check there to see if it helps answer your question? If not, I'll try to remember to look when I get back in town on Sunday! Also, my mirror image option is in the "more options" tab, not the "main" tab, in the printer preference window. I'm hoping that can help you locate it! I hope this is helpful!
Oh no! Sorry that I am just seeing this! It did not give my any prompt for payment! I was able to just download the printer software from the website on the paperwork.
I set up my printer,my stuff is not coming out vibrant.ive used a matte vinyl and glossy and the colors are a bit dull. Any suggestions why this would be doing it
Oh no! I have not sublimated on vinyl yet, but off hand, I would just suggest you check your printer settings! Something I missed in this video (but put in the description after) is an additional advanced setting for better coloration! Go to "more options". In the "Color Correction" section, select "Custom". Hit the "advanced" button. Select "Color Controls" and change the "Color Mode" to "Adobe RGB"! Hit "ok". If you have done this already, I am very sorry, but I am not sure how to help at this time.
@@pammontigny8507 I too am learning a I like learning from others and sharing with others. Fyi hopefully we can all learn together.. Fyi Jennifer Maker has a sublimination course starting tomorrow. I also just completed a sublimination camp which I learn a little of a LOT 🤣. Is the vinyl you used HTV type? I still haven't got a printer but bought subliminate pens to color with until I choose my printer either Epson ET 4800 or ET 2850. Heading toward 2850 because at Costco and they have good customer service 🤗. Good luck hoping things get brighter 😉
Hello..what about 4x6 prints? Seen one review that says it wasnt clear on no matter what they did...that scares me a tad...since we will mainly doing mugs and tumblers...i want high res pics with no issues...any input appreciated...thanks.
sublimation ink prints dull. The colors become vibrant when heated to material in a heat press. This isn't to be used for regular prints unless applying them to polyester material with heat.
Hi I recently got an epson ecotank et 2826 and want to convert it to sublimation too. Do you know if it works with this one too. I heard every ecotank can be converted but I’m not going to open the box if I can’t because then I’m going to try to return it for a suitable one. Thank you in advance
From all of the research I did previously, and from what I'm still seeing, this is the consistent answer! "Any Epson EcoTank printer can be used for sublimation printing. The important things to look for are that it uses Piezo technology and that it has the fillable tanks."
@@KraftingWithKandace It had the tanks on the front. I contacted Hiipoo Sublimation, and they told me this printer isn't suitable which I don't understand, it has piezo technology, and it's an eco tank. I didn't know there were so many things to think of when choosing one. I just want a good quality sublimation ink lol
I use the same ET 4800 and i use the Asub paper and my prints come out just fine. when i try and print with DTF paper my prints come out with pizza wheel marks. i have tried to mess with the settings and still same results. anybody know a fix for this or a good setting to stop the wheel marks?
Oh no! Unfortunately I have not had any issues like this so I don't know that I can be of any help. However, I will pin your comment to the top and hopefully someone else will see it who may be able to help!
thank you
Thank you so much! I came across your channel while looking for set up for sub on my E4800 & I chose your video & I really like the way you explain but don’t take up unnecessary time! You have such a sweet spirit about you so with that being said I liked, subscribe & shared with my fellow beginner girl friends!!
Happy Subbing & thank you again for your help! Stay humble beautiful!! ❤️💕
Thank you so much! 💕 Best of luck to you in your beginnings!
If you leave the silver seal on the ink and poke the edge with the needle, you can lay the ink on its side slightly elevated to extract the ink mess free by inserting the needle, using syringe as normal. I then used masking tape to tape the needle and syringe to the bottle of unused ink and put the cap back on the needle so I don't mix the needles up. In manage printer you can also rename it Sublimation Printer or something so you know it has special ink and not to confuse with another printer.
Oh, these are great tips! Tha n you so much! I'll keep it in mind next time! 💗
Thank you for the walk-through. You were very clear concise and straight to the point. Any questions I had you answered them all. I subscribed and I like your video. Thank you!
Thank you so much! 💕
I use the cap on the epson ink like as a funnel. The ink reserves have thin plastic for walls. easily pierced with a needle.
Great information! Thank you for sharing!! 💕
Amazing informative presentation! The best one so far on Sublimation....thank you!
Wow, thank you! 💝
Thanks for the step by step instructions. It’s was great help!!
Glad it helped! 🥰
Thank you ❤ so much for your help I already got my printer running 🏃♀️ 😅😅🎉🎉🎉
Wonderful! I hope it is going well! 💕
You are so great at explaining this ...thank you!
Thank you so much!
I'm not sure if I installed my printer correctly, I say this as I can't find the section in manage settings where I choose the paper settings. What I did was I linked my printer to my laptop via wifi? Was that incorrect? I do not javelin a cromebook only a Lenovo but of course I have and use crome as my browser. Not sure what I'm doing wrong.
Imma gonna level with you here, I just override the printer by hitting "ok" to proceed "with paper loaded in back of printer" I just do that each time I print. Which works because I don't keep paper loaded, that way noone can accidentally print to the wrong printer and waste my materials 😅
Thank you so much for this yes it is a little timidating I had my printer for awhile but I finally got paper and ink thank you again
Good luck 💕
Thanks ..Love the step by step by step..Thanks bunches
Thank you! 💕
Thank you for the video it helped me out I just bought today
So glad to hear! Good luck!! 💗
I just discovered your video and love the way you explain things! I just bought a used Epsen 4800 for a great price and it's in perfect condition. the guy we bought it from explained almost everything the same way you did. My husband and I are just starting our sublimation journey. The one question I have is, there is ink in the tanks from when we bought it and we want to top it off. Is there a special way to do this or should we just fill the syringe half way? Any help is appreciated!
Thank you! 💕 I am so sorry that I am just getting back to you. Life overwhelmed me recently! I hope you got this figured out! As long as the ink that was already in the printer was sublimation ink, and you had the same kind, then you should have just been able to add to it! On mine I can see, for the most part when it is getting full
Thank-you so much for your video. Really helpful thank-you 👌
My pleasure 😊 I am so glad it was helpful! Thank you for the feedback!
Can you PLEASE HELP ME! Anyone??
I feel like I'm inside of an abstract splatter painting!
I'm using the same printer and the exact same sublimation ink also... and there is ink EVERYWHERE! No matter what I do... the stopper on the syringe (what keeps it sealed when tipped over to fill)...KEEPS leaking EVERYWHERE! I tried the other color bottles and a different syringe and it just keeps leaking EVERYWHERE when tipped! (2 other people tried with me and it still leaked)
Can you PLEASE HELP ME!
I feel like I'm inside of an abstract splatter painting!
Thank you so much I have that printer but been scared to use it lol
Oh, well I hope this was helpful enough to get you on your way! ❤
@@KraftingWithKandace it really was I appreciate you taking the time..thanks again.
Thank you, so much! Very helpful!
You're very welcome! I am so happy it was helpful! 💗
Thank you so much for your step by step video… life saver
I'm so glad it was helpful! 💕
Thank you for the set up help but I’m stuck with setting mine up
Happy to help, however I can! Sorry to hear you are having issues!!
Got the problem figured out and it’s working!!! Yay!!
Do you like the size of prints you get? I see this one prints 8.5 x 11. I have seen many people getting sub printers that do 15 x 17. Would you say the 8.5 x 11 is large enough? Thank you. Thinking of getting one and can’t decide.
So far, this size has worked well for me. If I need a larger size, I will have to cut/puzzle them together. I will say, if you plan to do tshirts, you may want a printer that prints larger sizes, to say yourself some work. I, however, don't have plans to to many shirts. This printer it capable of printing longer paper! I've used legal sized paper in it, but I do believe it can do even longer than that. However, 8.5 is the widest it can go. I hope that is helpful! 💗
I been wanting a printer so bad but I’m stuck on which one to get
I felt the same way. I think any of the EcoTanks are a safe bet, but then you'll just need to take your budget and how large you want to be able to print into consideration.
What is pa technology? I have the exact printer. You said it at the very beginning of your video.
Hey! It is called micro piezo heat-free technology!
"This does not require heat in the ink ejection process. Instead, pressure is applied to the Piezo element, which flexes backwards and forwards firing the ink from the printhead." It is important because you don't want the ink to receive heat until it is being pressed. 💗
hi i looked in the link you left i did not find ink for epson 4800
The ink that I have linked is what I have been using since I purchased the printer and I haven't had any issues with it! They don't physically list the 4800 model, but say it should work for all spdon ecotank systems.
@@KraftingWithKandace thanke you
Thank you! This was soooo informative
I'm glad you found it helpful! 💗
Very helpful. This will make it much easier. I also have a question I cannot find sublimation ink specifically for the 4800 model does it matter which model it is I do have a 4800
I can’t find jack printer for a 4800
I'm happy to hear this is helpful! From the research I did, it is my understanding that they lost the most popular ecotank printers in the title, but most of the sublimation inks will say somewhere in the description "works with all ecotank printers". The 4800 is a newer version so it isn't listed many places yet. I can't promise that is 100% true, but just what I have found. I can tell you I have had no issues with the sublimation ink I purchased! It is linked in the description if you wanted to check it out.
My printer settings look nothing like yours, I dont have the options to change print/color quality.
I'm sorry! I am not sure how to assist in that manner. I hope you were able to find the solution! Best of luck 💕
Can i use this ink for regular printing i print i print documents and if water falls on the paper it gets smudged and then the document is trash because I can't read it. Any insight welcome
You cannot. Full technically if you really needed to print something for a temporary print you could. However, sublimation ink is not made for everyday printing news and it will diminish over time, and always look faded, and subject to smudging, until pressed. Sorry, dear!
So I started to use the classic printers jack and I'm struggling with the needs so I purchased the auto fill, it's the same ink so I can mix it correct?
If it is the same, then it should be fine to mix! But you may want to do a bit of additional research to double check! 💗
Can you print with 8.5x14” sublimation paper?
Yes! I have printed on "legal" sized paper multiple times without issue!
Very Helpful 💓🙏🏻 Thank you
Happy to help! 🥰
I have an Epson 4800 but it is printing in black and white. Any advice?
It sounds like it is a setting problem! Double check that your settings are correct, and that the program you are printing from isn't overriding your settings! If nothing else, turn it off for a few seconds and turn it back on! It could simply need a reboot! 💕
Krafingwithcandace can you please let me know sizes that will print please
I am so sorry about my delay! I've been moving and unable to keep up with responding! I am out of town, so I can't look at my manual right now. However, I pretty positive the largest it can print is 8.5"x17"
Thank you so much for your video..
Thank you for watching! 💕
Thank you for this video!!
No problem! I hope it was helpful! 💗
Hey i think I’m doing something wrong. The mirror or paper option is not showing up on my computer
I am so sorry about my delay! Were you able to figure this out?
Do you know when you open the ink how long it’s shelf life is? & did that ink come with the syringes?
The ink did come with the syringes! However, I can't seem to get an answer for shelf life after opening. I submitted the question on Amazon to customers and the company, but haven't received a response.
Help- what setting would I use for ultra presentation paper? Would ink jet paper work? I’ve tried regular presentation paper but murky colors :-: this printer has had me frustrated for a bit so hoping u can help :-:
I'm so sorry that I am just now seeing your comment! Unfortunately I am not any help! I have only used this printed with the sublimation paper.
What’s the largest size can this print
Can this printer handle Canson 300gsm watercolor paper?
I attempted to research this a bit, since I am not familiar with watercolor paper. Unfortunately, I wasn't able to find much information. I'm very sorry! I know it can be thicker, so I'm really unsure on it it will jam or not.
I have this printer but my USB and needs it for his work so I don’t see how I would be able to switch out the ink. Can you use sublimation ink with normal printer use and also making stickers?
Sorry about my delay! I was on vacation! Unfortunately, once you convert the printed to sublimation, it can no longer be used to typical use. They strongly suggest not switching the inks back and forth because they will get contaminated, and you would have to learn how to flush the entire printer to clear the previous ink. The sublimation ink is not meant to last long term, but i have used it a few times, in a pinch, for a couple things that I just need printed that I knew would be thrown away soon. The printed image is also very dull because the "true" colors don't show up until they are heat released by the press! I hope this is helpful! Happy to answer any other questions you may have!
How do u get the printer to recharge the ink if let's say u change it from regular ink to sub ink
I'm so sorry, I don't know the answer to that because mine was brand new when I set it up. I know you are supposed to flush the ink lines to avoid cross contamination, but I have no idea what that process is. My apologies! Best of luck!
My printer asked for a password . Did it ask for a password to install ? I bought it brand new.
I don't remember it requiring a password. I'm sorry to not be of help. 😔
Have you found any ICC Profiles for the ET-4800? I use Hippo Sublimation Ink but the colors aren’t the greatest.
I haven't looked for anything outside of the paperwork that came with my inks. I'm sorry you aren't happy with your colors. Have you gone into the advanced custom settings? I had to edit a portion of this video bc I forgot to include it. You can find specifics of what I'm talking about in my description.
Thank you!
💕
Hi plz it urgent can you plz tell me the weight of the box... Help me plz
I apologize, I don't know how much the box weighed 😔 but I'll try to find out for you
@@KraftingWithKandace it s really important tnx
From the Amazon link in my description, it's say approximately 11lbs. I am assuming that is package weight, not printer weight. Sorry, that's the best I can do as I bought this months ago.
@@KraftingWithKandace tnx.. U r so kind.. ♥️♥️♥️♥️
Where do I open the drivers once they are downloaded
I figured it out thanks for the great video
I'm glad you figured it out! I'm sorry I didn't see this sooner! Best of luck!! 🥰🥰
I am trying to do sublimation tumblers, and I am having trouble with the borderless setting, do you have any suggestions. Also, my colors are cmybk, do I change it to rbg?
Though different inks may give you different instructions (see the paperwork that comes with the ink you purchase) there is a setting you need to make to give you beautiful colors! If you are sure, you could print on the two different settings and see which works best for you!
In you printer preferences, go to "more options". In the "Color Correction" section, select "Custom". Hit the "advanced" button. Select "Color Controls" and change the "Color Mode" to "Adobe RGB"! Hit "ok". This makes a HUGE different in the print color and quality!
In this video around 8:15 I walk through it! if you happen to be a visual person like me!
czcams.com/video/1_fd7Z6drYA/video.html
Hi! In another video you did you talk about changing the drivers for better sublimation printing with these printer. I have the same printer and I was wonderig if you know the correct settings, please? Also it's interetig to see that your printer preferences and mines are completely different. On my printer display I dont get the mirror image option. I don't understand why
I am currently out of town, so I am unable to pull the paperwork, however, I did write everything out in full detail in the description! Could you check there to see if it helps answer your question? If not, I'll try to remember to look when I get back in town on Sunday!
Also, my mirror image option is in the "more options" tab, not the "main" tab, in the printer preference window. I'm hoping that can help you locate it! I hope this is helpful!
Did you end up finding out where to find the mirror image option? I also don't have that option and cannot find out how to change it.
How did you download Epson smart panel on you HP Computer ?
I downloaded everything I needed through the website it provides in the paperwork.
How do u install the software is it free because its telling me i have to pay 9.99
Oh no! Sorry that I am just seeing this! It did not give my any prompt for payment! I was able to just download the printer software from the website on the paperwork.
Which one did you want first?
If I'm being honest, I don't remember which printer it was, now. It was just another version of the Ecotank!
I set up my printer,my stuff is not coming out vibrant.ive used a matte vinyl and glossy and the colors are a bit dull.
Any suggestions why this would be doing it
Oh no! I have not sublimated on vinyl yet, but off hand, I would just suggest you check your printer settings! Something I missed in this video (but put in the description after) is an additional advanced setting for better coloration! Go to "more options". In the "Color Correction" section, select "Custom". Hit the "advanced" button. Select "Color Controls" and change the "Color Mode" to "Adobe RGB"! Hit "ok". If you have done this already, I am very sorry, but I am not sure how to help at this time.
Are you talking about how it prints on the sublimination paper OR after you heat pressure it on to you shirt or blank?
After I press it
@@pammontigny8507 I too am learning a I like learning from others and sharing with others. Fyi hopefully we can all learn together.. Fyi Jennifer Maker has a sublimination course starting tomorrow. I also just completed a sublimination camp which I learn a little of a LOT 🤣. Is the vinyl you used HTV type? I still haven't got a printer but bought subliminate pens to color with until I choose my printer either Epson ET 4800 or ET 2850. Heading toward 2850 because at Costco and they have good customer service 🤗. Good luck hoping things get brighter 😉
what are missing segments?
This would be any lines or images that are missing from your printer when you are running your checks, or printing an image.
Hello..what about 4x6 prints? Seen one review that says it wasnt clear on no matter what they did...that scares me a tad...since we will mainly doing mugs and tumblers...i want high res pics with no issues...any input appreciated...thanks.
sublimation ink prints dull. The colors become vibrant when heated to material in a heat press. This isn't to be used for regular prints unless applying them to polyester material with heat.
@@suzstjohn_Z thank you!
I have printed pictures of multiple sizes big and small and they are all very clear after pressed! 💕
Hi I recently got an epson ecotank et 2826 and want to convert it to sublimation too. Do you know if it works with this one too. I heard every ecotank can be converted but I’m not going to open the box if I can’t because then I’m going to try to return it for a suitable one. Thank you in advance
From all of the research I did previously, and from what I'm still seeing, this is the consistent answer! "Any Epson EcoTank printer can be used for sublimation printing. The important things to look for are that it uses Piezo technology and that it has the fillable tanks."
@@KraftingWithKandace It had the tanks on the front. I contacted Hiipoo Sublimation, and they told me this printer isn't suitable which I don't understand, it has piezo technology, and it's an eco tank. I didn't know there were so many things to think of when choosing one. I just want a good quality sublimation ink lol
What kind of laptop do you have?
I have a 2019 HP Pavilion Flagship 15.6" Touchscreen Laptop with the Intel Quad Core i7
amzn.to/3ABRcYH
Does it print A3 format?
I don't believe it does. I am out of town, so I can't look right now. However, I pretty positive the largest it can print is 8.5"x17"
@@KraftingWithKandace okay! Thanks 😊
Could’ve turned off the light smh
when I go with borderless, it gives me a warning symbol
I usually get a warning too, but I just press continue and it typically still prints the entire image! Hopefully that happens for you too!
@@KraftingWithKandace thank you
🎉🎉🎉🎉🎉❤❤❤❤❤🌸🌸🌸🌺🌺🌺🌺
💕💕
Resulty???😂
Ok, but listen, my mouth just says things and my brain just goes with it 😂
You have no idea what sublimation printer is.