Atlasminx World Record (former)
Vložit
- čas přidán 15. 08. 2021
- This is the atlasminx. The puzzle has an edge length of 140mm, weighs 7.9kg and has 4863 pieces.
The design of the puzzle was inspired by Matt’s yottaminx and Oskar’s 17x17. The biggest change I made to the floating anchor mechanism was to change the direction of the “hooks” each part has. That allowed for the parts to be printed in an orientation that minimized the need for support material in FDM printing. I also added a kind of foot to 25% of the center pieces that prevents them from twisting in place and also helps with sorting. I made the puzzle sitckerless as I did not want to place over 5000 stickers. Also it helped mark progress during the build Instead of just printing in black and only black for months.
I would say the turning quality is better than the 22x22 but a little worse than the yottaminx. The turning is a bit catchy and alignment is an issue. The puzzle is stable though, so far I've not had a signal pop.
Overall this project took a little under 100 hours from start to finish witch was a lot faster than I was planning. Given the relatively short amount of time this took I plan on at least partially printing out a version 2 of this puzzle in the future. I think with only a few small changes the turning could be improved to the point were solving it in a reasonable amount of time would be possible
Filament I use for 3d printed projects: us.polymaker.com?aff=41
Also check out Daniel Forgosh's video on this puzzle: • Atlasminx (Former Worl...
Atlantis by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/ - Zábava
That is incredible. And honestly such smooth turning for a printed puzzle of that magnitude.
hey tingman
Tingman brought me here!
Hi tingman big fan of you and your daughter you girl solve cube in under 15 4 5 seconds you guys are insane I will solve a cube in 2 minutes and you guys you guys are good at cubing
Ayyyyy tingman
Tingman 😳
That’s HUGE!!!!!!
cat
That’s what she said
@@oursukhoi9513 who’s she and why are they saying everything 🔫
@@thegoldengood4725 your to young to understand
He's a huge tik tok cuber with over 1 million followers. He mainly focuses on cube art.
i give you a tip. NEVER scramble this monster
.
yes
That's what she said.
@@jahjoeka who is she
@@Khaleelgamer123an egg
Me after scrambling this:
"Hey boss! Can I have 2 days off? I have a big problem at home that I need to take care of'
Me actr scrabing this:
Mo it ý
Magnificent.
Glorious
Better than 100% of megaminx.
hi tony
What up tony
the legend himself
That is insane! Congratulations!
Hey
Pls reply me
I'm ur big fan
Woo hoo!
I love you blue your my fav CZcamsr
Fun fact: Technically this minx's official name would be Quettaminx now because the SI unit updated their prefixes
i can't find a real 17x17 minx (ronnaminx) yet, does it exist?
@@GetRidOfHandles i dont think so
What we would call a 21x21 would be the atlasminx
Lol, the way I see it if you design, print, test, assemble this monster you get name whatever the hell you want!!!😂
Max Park be like: Done in 2 minutes blindfolded
All I can say is wow! Congrats!
Fun fact: everything is either a potato or not a potato
@@Plasmicballs ok
Yeah
You’re alive??
@@Plasmicballs Fun fact: if you stacked Elephants on top of eachother they would not like it
This feels more like a piece of art than a puzzle. It feels like there isn't a solved position, it is awesome either way.
25x25x25 minx decagonal prism
czcams.com/video/UsWDKBM2rCc/video.html
@Check my about page link no, screw off
P part 3 bnao
Why do parts look like they were programmably milling by programmable machine?
Damm, i just commented this.
I can't believe how big of a puzzle it is and it has smooth turning for just a project😮
That’s INSANE! Congrats!
Even scrambling it takes a LOT of time
nonsense? nice
:0
nonsense
Seriously
Hello creator of FNF vs Nonsense. Didn't know you were here
This is the most verified cubers I've ever seen in one comment section. Let alone people. XD. This is some phenomenal effort right here, makes me wanna do megaminx lol.
Agreed
The XD btw two dots dude wtf?
true
@@deva561 why are you using btw as "between" ?
You know almost everyone use it as "by the way" right ?
@@napstarem7503 same here dude, not used to chat with anyone who uses btw as "by the way" ¯\_(ツ)_/¯
Super Awesome! Congratulations 🎉🎉
That's alot of hardwork!
Mind-boggling. Can't even imagine the dedication it takes to achieve something like this. Congratulations!
Oh, are you going to try to solve this blind?
dfgg
@@rogervanbommel1086 ......
i could solve this using my teeth..
I bet you're already trying to multiblind this.
As someone who wants to get into engineering in college, stuff like this not only motivates me, but also gives me immeasurable appreciation for your ingenuity and dedication to these projects
Nice man. Don't forget this feeling 🙌🏼⚙️ Let's build great stuff
I'm in the same boat that's how I felt
Ya know this comment really just helped me figure out what type of engineering I wanna go into… I wanna go into whatever the fuck this is 😭
Acabo de encontrar tu canal y solo te quiero decir que te amo por hacerlo stickerless
Wow patience patience 👍🏻 it’s unbelievable ! 😝 BRAVISSIMO 👏🏻👏🏻👏🏻👏🏻👏🏻
seeing this in my recommended immediately brought me back to seeing the yottaminx for the first time, this is incredible
Never thought I’d see a bigger minx puzzle. I’ll be damned
THIS IS BIGGER THAN THE MIX OF MADNESS
What will take longer to solve; the 33x33 rubiks cube by Greg or this 19x19 atlasminx?
Your scientists never stopped to ask if they “should” only if they “could”. And why would they this is dope as hell!
The legend has come back like a Phoenix from the ashes
Ayyy harry potter reference! 😜
@@Kewbix I mean yeah it's a harry potter reference but it's also a mythology reference too cause in Phoenix mythology is says they rise from their ashes
@@JayJynxTrash ah ok
WOW Congratulatioms to you It’s so hard thing I can’t believe
Amazing cube very hardworking to do but the best turning is also very good literely this video makes my day
Shengshou: I have the 19x19 cube!
Coren: Hold my minx.
*give me my 3D priter
Nice
Omg
I think this is the most likes I got on a comment ;)
@@hongkonger885 99 likes! (I already liked it, so... 100th like milestone coming up!)
THAT IS AMAZING EVEN IF PINK IS CLOSE TO RED AND THEY LOOK THE SAME. THAT IS AMAZING ITS A MASTER PIECE
Bro it's the lighting..........
@@MrMan20 shut up idc about u>:(
Wow! That is incredible!!!!
I was wondering if you were considering updating the name of this puzzle. In the past month or so new naming conventions have been accepted by the scientific community for higher (and lower) order magnitude numbers, so the yotta- prefix is no longer the largest. With the new prefixes the Atlasminx could now be called the Quettaminx if you were to continue standard Minx puzzle naming convention. I find it kind of fascinating that twisty puzzle design and naming convention ran out of names for minx puzzles, meanwhile various feilds of science ran into the same problem prompting these new prefixes, but yet puzzle design has advanced further still as the new prefixes fail to provide a possible new name for your Minx of Madness.
Oh hi ET cubing
What on earth 😳 careful its gravity doesn’t mess up the earth’s rotation 🤯 but seriously, congratulations, it is the most beautiful puzzle I’ve ever seen 👏👏👏 oh i also meant to ask, hAvE yOu EvEr SoLvEd iT?
Oh hey look who it is
I would have expected no less from you than to get back into puzzle building and immediately go "well I need to be the biggest". Was thinking about you earlier this week. Miss you man.
That’s huge indeed 19x19 minx
Me at 90 years old: Finally! Just two more turns away from solving the Atlasminx!…*Cube pops*…*Croaks*
Hmm, I'd imagine a large portion of the movement issues come down to inherent inaccuracies of FDM printing (elephant's foot, warping, rough layer lines, etc). Even spending time to manually sand each and every piece (which is absolutely NUTS), you end up with pieces out of tolerance in a puzzle that's super sensitive to said tolerances. I wonder if most of the quality issues could be quashed by making use of a SLA printer instead! The layers are imperceptible to the naked eye and the tolerances are superb, you should totally give it a try on a smaller scale project!
I'm not too familiar with the limitations of SLA printing and its cost, so I can't speak to my idea's feasibility, but if it's possible it should totally be done!
In any case, this is an incredible achievement, you should be extremely proud of the monstrosity you've made here!
After seeing FDM printed pieces, my exact thoughts were SLA would make sense here. 1 kg is around 30-50$ for regular resin. Considering that resin and PLA have around the same density, but SLA have higher space-filling resolution, the project can weight around 9-9.5 kg. So not exactly cheap thing to do, considering decent SLA printers cost upward of 1k$.
@@nikarm22 Most decent sla definitely don’t last I checked.
25x25x25 minx decagonal prism
czcams.com/video/UsWDKBM2rCc/video.html
@@nikarm22 Thats expensive
I did a jigsaw once.
This is pure legit brilliance ...just imagine staring at nothing, thinking of bringing this to life 🤯..congratulations.
Omg I haven’t heard the song at the start since 2021!!!!!! This brings so much memories back…
Absolutely Majestic
That puzzle looks so AWESOME. Amazing job on building that beautiful puzzle.😀😀👍👍
The puzzle nerd in me smiled ear-to-ear when I saw the Altas minx thumbnail. The geek/engineer in me is in awe that you had the skills, patience, and determination to complete this. Totally amazing. Congratulations!
Thank you very much
OMG, this is a very amazing puzzle thank you for the vid, but hard tho
Teacher: There is only one homework today
Homework:
Excellent work, Coren! Your dedication never ceases to amaze me.
oooooooo
As of 2022, the Atlasminx can now be referred to as the Quettaminx thanks to the new SI prefixes introduced in 2022. It is also the dodecahedral equivalent of a 19x19 cube. The Minx of Madness (a 21x21 cube equivalent) can keep its name since no SI prefix exists above quetta- (yet)
Beautiful
Awesome man, cannot imagine the time it took to assemble and print. Truly a master of their craft
AMAZING WORK!!!! Congrats on the WR
My full respect for this guy
U just broke the world of the worlds largest Rubix cube Your a legend for building that big of a idk how to type it but nice job!
I’m happy to see the final product. Looking forward to your next project
So cool
Cant wait to see it in the market and see the full solve of this puzzle
magnificent very well done
Amazing!!
Nobody:
Absolutely Nobody:
People Who Like To Torture Theirselves:
Wow how great! "It is a beast". GOOD JOB, CONGRATULATIONS.
Fantastic 🔥🔥🔥
Wow incredible
The fact that u did that by hand, that's amazing 🤩
Is this a 19 layer minx puzzle? Looks like the ShengShou 19x19 has finally met it’s match!
Great puzzle!
No words to describe ✨
Wow,I litterally loved this cube,i cant wait for speedsolving edition.
Very cool to see you zoned in and working as your 3D printer was printing!
that is huge 🎉
That’s really cool congrats
Seeing some man actually races with a actual 3d printer on fast-forward terrifies me because they spend so many hours to print a thing. I cant imagine how much effort he gives for this cube
I can’t believe you actually made that it’s incredible.
this is a great Master ✔️
bro this is insane😱
Incredible, easily the most impressive puzzle I’ve seen this year
absolutely crazy, i'm in awe
amazing vid
So satisfying
Just amazing how you smashed the last world record. Good job 👏
I agree 🙂
@@matt.bahner Will you ever return to CZcams?
@@jacobgoddard9688 yes I want to! I’ve recently got back into speedcubing and it’d be cool to start building again. Seeing this turn out so well on FDM makes me want to get my own printer 🙃
@@matt.bahner Yay!
Dude, you're crazy AF.
That's amazing!!!
Hola kibur xd
Cool hardwork!
so far that's the most hugest something like that cube I have ever seen 😱😱
Wow, I'm AMAZED!!! 😲 I can't even imagine how long the assembly process was! INCREDIBLE work!!!
ooooooooooooooo
This is one of those projects where the question is always "why?", but the answer is always "why not?"
true
Incredible...
Big respect for this man for making this!!
Going stickerless was a smart move.
this is so incredible !
You deserve more subs😊
I love it❤
"largest minx puzzle in the world"
This man gonna build a larger one
the only thing that is still on my mind is... how many different scrambles can you make with this...if the 19x19 and everything higher has more scrambles than if you filled the entire universe with hydrogen atoms, to the power of 12, i just can even fathom what amount that would have
Just too many numbers 😂😂
i'd tell you the full number here, but it wouldn't fit in the comment character limit, just know that it's a lot
@@froxdoggaming3385 lol
@@froxdoggaming3385 but there isn't a comment character limit
Wait
The Master of Rubik's cube Builder
I am halfway through my examinx! I need one of these!
i've actually solved an examinx and assembled a 19x19, it's insane how you were able to assemble an examinx at this scale
Congratulations that is amazing work, surprised it "only" took you 100 hours
Its beautiful
THAT IS MASSIVE! 😮
I feel like that has more pieces than my brain cells
this video really proves that anyone can do anything thankyou for inspiring us!
I don't have words to describe this.
Woah souptimmy and tingman. Im a big fan of you two🎉❤