Sail Life - Dropping the keel and finding the leaks ⚠️ Fountaine Pajot Helia 44
Vložit
- čas přidán 25. 08. 2024
- In this week's video, we drop the keel on a Fountaine Pajot Helia 44 and open it up to repair a leak on the top of the keel.
This is not our boat. We're taking a short Hurricane break from Athena. We'll head back down to work on her after the boat show in Annapolis. If you still haven't purchased your ticket, you can get $5 off by using the coupon code 23SAILABS, and Ava and I will make a couple of bucks.
If you see a 50-60ft center cockpit boat in really bad shape that seems like it might be for sale somewhere on the East Coast, we'd love to hear about it :) Send us an email at ohglorioussanding@gmail.com
** Links **
Sail Life website:
www.saillifech...
Sail Life on Patreon:
bit.ly/SailLife...
Sail Life on Instagram:
/ saillife_
Sail Life on Facebook:
bit.ly/SailLife...
Sail Life on Twitter:
bit.ly/SailLife...
Mads, you are in your “element” with vids like this👍🏻
I've come to the conclusion that I'll watch and enjoy whatever Mads and Ava are filming -- DIY or sailing. Great vid!
Sailboat horror stories are excellent catharsis for all us working on our own boat rehab projects.
Fountaine Pajot is officially on notice that what they are putting out is garbage. You exposed them for what they are. To make it right they should be paying for this fix. Hope this video goes viral.
If they pay for this, they will have to make a recall and pay for that as well. It's going to be very interesting to see how this plays out, Mads and Ava how quite a bit of reach, so I doubt FP can just ignore it.
I expect a cease and desist to show up more than a cheque.
@ It goes to show the shoddy work they do. FP is in for a big showdown.
@aserta they have no leg to stand on. Garbage company is my conclusion.
I love the idea of a project that you can “really get you teeth into”. ‘Cos Athena was really only a quick brush up and bit of sanding!
Considering what you found in Keel #1, and we all know what a perfectionist you are... I'm betting Keel #2 is going to be on your list of things to do!
I was thinking the same thing. I expect the same quality level of construction. Mads attention to detail is superior.
I suspect a lot of us where having those same thoughts.
At the very least I would be drilling a hole or two and inserting a bore scope camera to know exactly what is there. If they choose not to do the repair at this time. It would just require patching a couple drill bit sized holes. Plus giving them the real facts of what is there, instead of imagining one way or the other. (Personally I would want it addressed before I went cruising long term. But to each their own.) There are plenty of catamarans that just do weekend and holiday coastal excursions. So that may factor in to the decision, right or wrong.
I don't think one would have to be a perfectionist to want to fix the other keel. The contents of keel #1 were almost actionable (at least in the US where there is the rule of lawyers ;-)
It wouldn't be a total surprise (at least to me) if the other keel revealed that the bottom half was filled with discarded shopping bags.
@@Gottenhimfella shopping bags 🤣🤣🤣
Back in your natural element Mads. Nice!
After exposing this appalling construction you would hope fountaine pajot would have something to say. This is hugely embarrassing and will do measurable harm to their business, and so it should.
There is a saying, "How you do anything is how your do everything." So the crew that 'built' those keels were probably not the A-team who did the hulls with vacuum infusion etc, but that was appalling! I bet they said something like this, "Alors nous devons combler ce vide, récupérons juste un tas de déchets qui traînent dans la cour, mettons-les là-dedans et vaporisons de la mousse pour le recouvrir, personne ne le verra !"
Makes you wonder about the quality of work on the rest of the boat
especially considering the price of the boat, one would expect a professional job, clearly it is not
Most 'Factory' Cats share the same traits - built by the lowest bidder. I was warned off F.P. Cats years ago by a friend that was lucky to get rid of his (after putting a ton of work into it).
Yeah, I’m steering clear!
16:20 my man hasn't finished his current build and already dreaming about the next one. kekw WOuld love to see more boat refits from you. An Amel Super Maramu would be a killer project for you.
I always felt years ago Mads was never really into sailing his real passion in life is rebuilding and fixing things especially boats ...
There's an '87 Tayana 52 in San Diego for $152,000. Very pretty example with a fabulous aft cabin. You could do some personalization projects to it and head off into the pacific, without having to pay Panama a stupid amount of money. Also, there are probably a lot of FP owners right now, with beads of sweat running down their faces! 🤣
For raining that keel back in place, I was thinking of using a floor jack, like they use for cars. They can handle a lot of weight and lift fairly quickly. The range of motion that they provide should allow you to lift the keel up in one go after the adhesive is applied, so you wont be stuck block and adjusting several times.
New Project?? Now we're talking!!!! :) :) :) I know you guys love sailing, but you were born for this Mads!!!! You are the DIY MASTER!!!! :) :) :)
Ooofah! That was some massively shoddy workmanship from the manufacturer Mads! Glad you guys are rectifying it!
Cheers, Sev
A project more extensive than the refit of Athena? Oh my!!
Your investigation process and attention to detail are truly impressive - a pleasure to watch! I just hope that the manufacturer of this yacht has seen this for the sake of their future business as well as their existing owners.
Time to write a book or produce an organised series of instructional videos.
I’m never going to be able to afford a small sailing boat let alone a 800k catamaran but I have been fascinated watching all your DIY videos. To be honest, we just love you in your element, which was the original formula that worked so well.
It’s clear you like DIY more than sailing full time.
Like you, I am astounded at the mess inside that keel. My feeling now is that you should drop the other one and do both of them together because you just know that sooner or later that one is going to go the same way!
You'd think a half-million bucks would get you something better. That is some hack work. Glad you're getting it fixed right.
OMG. Those plugs. Who does that? I didnt think I'd enjoy this video as much but this is exactly what gets me about how boats are built especially newer ones. Great reveal Mads!
Fontaine Pajot apparently does that. :)
It does seem pretty rinkydink on a what was probably a million dollar boat (post fitting out and with shakedown expenses rolled in) at one point.
I'm so glad your experience can help a fellow fallower in this way!! This is SO awesome and you are the man for helping your friends and fallowers. The earth needs more humans like you. Keep living the dream and doing good!
As a sailor since the early 70s and having worked as a laborer at a sailboat dealership while in college, I coined the phrase, "Sailboat manufacturers build 'em to sell, not to sail." The poor construction of that keel confirms what I've said for years. It's never surprising to find poor quality in boat construction. As for you finding another boat project, it just confirms you're a glutten for punishment. But, alas, you're really talented when it comes to DIY and hosting videos. Keep up the good work.
Madds, after 5 glorious years of rebuilding a sailboat we thought you would be resigned to sail that boat for 5 years BEFORE looking for another project boat. You know… enjoy the fruits of your labor… and show us what your boat can do. I’m not sure you can sell your boat because it is sooo high tech, most wouldn’t be able to follow all the electronic gadgets to make it work… so unless you can get Brian from Sailing Delos to buy your boat… who will buy your boat. LOL
Oh oh Fountaine Pajot, hopefully some executives are watching this video…
They don't care AT ALL. Ask me how I know.
They already know, they just don’t care.
They dont give a fuck
Haha!
@philareilly if they cared, it would never be built that way in the first place.
When you said you are going to find a new refit project it made me smile. I REALLY LIKE the refit videos.
We have a leopard 46 and had water weeping from the keels. In conversation with the yard and online from Catamaran experts, it's a very common aspect of our boat design, but with some key differences to your situation. In the Leopard there is actually a fiberglassed hollow not filled with foam, where water collects. The keels are also attached with transverse keel bolts to a flange coming out of the hull. The general consensus for us was that if there isn't significant keel boat corrosion the best course of action is to drain and then re-bed the bolts. It appears that the FP has a different keel construction. To be honest, most owners on Leopards report this issue and live with it, namely because it's so hard to stop ingress and it doesn't meaningfully affect structural integrity. We've been proactive in trying to remove the water and sealing, but I suspect the location will always lead to some kind of water infiltration
You will find your project boat at Green Cove Springs, Florida….where boats go to die. Good episode, Thanks, Andrew
Woohoo, back to your roots!
Probably one of the most informative DIY videos I have ever seen. Now all I need to do is find an $800,000 boat and a Sawzall.
I chartered a Tayana 52' in the Virgin Islands back in the late 80's. If you could find one, they would be a great project. It had a large aft cabin and was sturdy enough for the charter trade. It also sailed very nicely but could be easily handled by a cruising couple. Happy Hunting!
I will remember this brand of boat, for sure.
And Fountaine Pajot said...??? Great job as always.
Fingers crossed that you find a new project. I also miss the DIY adventure.
I know it's not in the cards but I'd have to pull that other keel and look into it after making the discovery that you guys made.
Wow! That’s crazy. I applaud the confidence to dig in and remove that keel. What an insane finding inside! Really great work.
I hope you are going to open up the other keel as well. Personally it looks like repair work prior - I hope not original OEM work.
Really enjoy your channel!!!
A question (not a suggestion, I've never done this sort of repair, so I don't know).- in building construction, when sealing a joint, it is common to push a piece of close celled foam "backer rod" deep into the joint first, and then pump in the sealant. The backer rod stops the sealant from just going through the assembly, and also allows you to squish the sealant in, against the backer rod, so it spreads out, and presses against both sides of the joint.
When you re install the keel, I wonder if the same thing makes sense - lift the keel up into place - use some wedges to keep it centered in the slot, and then push a long backer rod in, all around. Then squirt the sealant in, against the backer rod. The backer will prevent it from going all the way up to the top, where it can never be cut out in the future, and also forces it to spread out a bit, to touch both sides.
It's not a sealant, it's an adhesive. And it is the only thing holding the keel to the hull, so it needs to go all the way up. But the gap is ridiculously wide.
idea for getting the keel back in place. Build a cradle for the keel so its upright and held firmly and then use your bottle jacks to raise the cradle. Not only will it be easier to raise but there should be enough pressure to ensure a bit of squeeze out of the adhesive and a strong bond.
Like a transmission jack. They could go to an auto junk yard and get two scissor jacks for cheap.
What a shocker Mads. Yukko.
Would it be a good idea to build-up the tongue of the keel to better fit the pocket in the hull?
That much gap does not seem right at all. Maybe build up the Keel and the pocket a bit?
The point is for the keel to have room to break away easily. If they build up the keel too much and then run aground, they will crack the hull instead of breaking off the keel. I think to adhere this back into place in a well defined fashion is a project for some engineer with SolidWorks who can calculate the required minimum and maximum strength and and how not to exceed either. I think simply putting the keel in place, then squirting a can of expanding foam into the gap might be a very good option. Of course, it depends in the foam...
Regarding getting keel back, one could get some inspiration from the Sailing Yabá videos.
Wooden wedges and blocks of wood could do it.
Considering the fine build quality of that keel, I'd be seriously considering dropping the other prophylactically.
I wouldn't have bothered with the first one (what's it matter if its wet), but after seeing this It would be madness not too! 😳😳
Parlay revival rebuilt their sacrificial keels after hurricane damage. You can see what was in theirs. One interesting part they had a similar failure to bond completely. Theirs was crushed but the adhesive didn't fail.
Yep - czcams.com/video/AU5Du5wDuvo/video.html
Saw a refit of a hurricane damaged catamaran where they used 2 rapid pump floor jacks to lift a whole hull section into place. I think you could get those keels back up quickly with 2 PITTSBURGH2 Ton Low-Profile Floor Jack with RAPID PUMP along with using your wooden guides. $119 each at Harbor Freight
Another great video, Mads. I wonder if a couple of long-throw automotive floor jacks, along with your supporting 1-by lumber guides, would help raise the keel(s) back into it's pocket(s). They may be a little more manageable with the keel raising than bottle jacks. Just a thought. Always look forward to Sunday vids with Sail Life.
I was thinking the same, it's important the keel is secure laterally, as they did when lowering.
Hi Mads, have to say that I really enjoyed this video. I think that this should be part of your regular format. Travelling the world, doing some sailing, doing some sightseeing, working on repairs to other peoples boats, doing tours of the boats. And then putting it all together into your videos. At least until you dive into another big boat refit/resurrection.
Not sure if you would be familiar with an Aussie show called "Ask the Leyland Brothers" from the late 1970s but now that you are sailing again your videos definitely feel a little bit "Leyland Brothers". Which is great as in their day they were very popular and the format of their show was very unique.
Construction air bags for lifting. to put the kill up.and hold it in place
I think that make sound sense. The local fire brigade might pop along to help. 😏
Whatever the glue that was used to hold the keel in place must have been very good stuff. Can't wait to see how you fit the structural plywood back in the top of the keel and then fill it all with foam. I think the only reason the keel never separated from the hull was due to the buoyancy of what material was left in the keel. On a side note, Sue and I had a very nice time at the outing in North Charleston and it was delight to meet both Ava and you and other sailors! Thanks John and Sue
Use an airbag of some sort (air bed?), to lift the keel back up again.
Rent a lift bag from a dive shop or salvage company. That might be overkill. If 4 guys can pick it up it likely only weighs 500lbs. A garage jack can lift an engine block up a foot in 30 seconds so maybe one at each end would do the job.
just a half decent trolley jack will do the job - the issue is the height of the lift required. It might take two stages - to get the results you want. something about French production builders. most of them shouldn't be allowed out of the play pen to build and sell yachts.
53 DS Jeanneau.... Perfect
A meet up and work with RAN SAILING would be great.
In few words Great work 🤜🤛
DIY is your calling. It's nice of you to help out what's his name. You are close to downtown Chareston, SC, a place with an incredible history. Ava is a fantastic tour guide. If she's up to it, a tour of Chareston would add a pleasant change of pace to the video. BTW we live in Pawleys Island, about 80 miles north of Chareston and along the ICW. We'll, wave at you as you pass though Georgetown. 😊 Cheers.
Forts Sumter and Moultrie are both very fascinating and fun to tour. There are a number of colonial and civil war era museum houses to visit as well as the military academy. If one is cruising a motor yacht or a sailboat with a not so tall mast there is an excellent anchorage further up the Ashley River past the opening bridge but I believe the bridge is 55' or thereabouts just past the Megadock marina.
The worst part of Charleston is the two awful opening bridges on the ICW at either side of town. Their schedules and blackout times suck making it nearly impossible to go through without stopping for the night at least in Charleston .
The current can be scarry fast while hovering and waiting for an opening especially on the side going South out of town. There is a short cut just past that bridge with crazy currents in there too which should be timed to avoid the worst of them. We once spent nearly a half hour to go one mile motoring at full throttle into it
You know much more about that than I do. I'm a retired pilot and live vicariously through videos of sailing, the only item remaining on my bucket list. Cheers
Wow, the inside of that keel was grim! I guess the obvious question then is whether you'll be dropping the other keel and doing that one at the same time.
Thanks Mads for this very interesting and revealing DIY video/project..really liked it.👍👊 I am also very curious to your new 50-60ft boat project..although lobbied for the almighty 38ft's as 38ft boat owner😅 Sleeping in an aft cabin was no succes here..waves hitting back of boat especially when windy outside..keeping me awake. So I DIY moved to by experienced sailors (and boat designers/builders like Sirius) best sleeping place in the boat..midships..changing part of the saloon there to also my 'skippers hut' and the aft cabin to also a saloon (with the back windows also nice for looking around and have more contact with the outside world often lacking in down placed midships saloon..when not having deck saloon). Enjoy!!!
Hey Mass, I’ve the perfect project for you. A neighbour cut down several acres of woods a few years back, and has been seasoning it. I saw a great set of plans online. I think the two would go hand in hand. The ultimate diy project. 😎
Build a supporting cradle and rent/borrow a fork lift (for the day) for refitting the keels.
Thanks for the inspiring keel repair films, motivated me to remove our cracked keel on our 2007 Mahe, contents of keel the same, an assortment of possibly workshop waste!?
After that "blistering" exposé of Fountaine Pajot, I hope you can still get into Martinique this fall/winter! And I'm glad the exposé was by you and not me. I tend to be "more descriptive"!😉
Well done Mads. How embarrassing is this for Fountaine Pagot? If this is the standard of workmanship on this model, then surely the quality of buid on all others should be brought into question. Many questions should be asked from all the owners who have purchased boats from that company. Not only is it shoddy work, but who QA'd the workmanship?
Love your videos Mads, and doing boat work is your forte. I hope you get a project boat whilst in the USA.
You rock buddy. Can’t wait for the next rebuild.
I can't wear a tee shirt for five minutes without getting something on it, never mind buggering around with a keel. Good to see the master at work again. (I do like the cruising bits too though).
I have a feeling that if you get a huge project Ava is going to strap you to the anchor and drop you over the side! I think you aught to cruise for a while FIRST!
OH gloriouse sanding : )
Wow, the build quality. I wonder if they figured that keels get replaced every five years or so. Or that it's "good enough" the way they built it.
What a crap build for the keel. You would be concerned about the build quality of the rest of the boat. Great video, and I’m happy to hear you talk about another refit project👏👏👏👏
You are hard core!
As the keel has foam in it, it seems that the keel is not contributing to the downlifting moment of the boat (like a monihull) , but more to avoid drifting of the boat. Maybe you could do both by adding more weight so the uplifting component is change to downlifting. A real fontaine pajot hack to make it better 😀
The last thing you want on a cat is heavy keels. Buoyant keels are better.
Be thankful that the top adhesive didn't make contact. Imagine how much more difficult it would have been to remove!
Quality build! Look at that underbody; no wonder they don't sail to weather.
Gentlemen don't sail to weather.
Most cruisers motor everywhere anyhow.
You have a truly amazing story that I have been following almost from your start on the repair of Athena. Great work and wonderful adventures! But now I am lost somewhere. What about the putting Athena up on land in Trinidad? Are you done sailing? Where will you live now? Still on Athena but on the dry so to speak? Are you going to search for a new bigger boat? Please, if someone else did follow along better than me may please sort this out for me. Best of luck!!
New project
I think I’ll invest in sandpaper stock
Sacre bleu!
Fontaine-Pajot owns Dufour these days, too…
Madds, find Yaba, 80 ft schooner and go back 2 1/2 years to 3 years. They had to replace the entire keel.
Where's Ava? She needs to imagine an new intro for you! Seriously, though, I'd have deep questions about the whole boat at this stage!
Looking forward to your next build. Thanks for the videos
I can already see it coming: Mads buys a well (ab-)used Super Maramu. :-)
Ruby rose was in Charleston and it snowed in winter
Very impressive work
Mads if you feel like taking a drive to eastern Long Island there’s a couple boats in Greenport that you might be able to make a deal with the yard owner . I should have a video of the boats under my name here.
I know of a Ed Monk design motor sailer it’s on the hard here in Alaska. Ed monk makes so very nice boats
RE FITTING KEEL BACK... just an idea. build two frames (front and back) to hold keel in orientation. place them on pallet rucks, sika flex area needed then pump up trucks in unison.
there are many boats at Glades Boat yard just east of Labelle, florida
I didn’t read all of the comments so if someone else has already said this, I am sorry.
Mads, you said that when you return the keel into its pocket you will need a quick ways to get it all the way up into the pocket. May I suggest a couple of automobile floor jacks. They are available to quickly lift from 2 and 1/2 ton to 5 tons at the pump of the handle and they are affordable. Check out Harbor Freight
I was shopping for catamarans a few years ago (ended up buying a lagoon 42). Took a test sail on a Fountaine Pajot. They're very glitzy. It was my partner's favorite boat. However, when I asked about how repairs could be made to scuffs on the surfaces (which were not wood), all I got was shrugs. I also didn't like how storage under the beds was glassed in so you couldn't find the leaks if you were holed. Not at all surprised to discover the shoddy workmanship of the keels.
I propose that the adhesive which didn’t adhere to the pocket sides was cured fully before insertion, and served as an alignment gasket of sorts.
I've said it before, but, someone could make a ton of money making a 'slide on' line voltage transformer for battery tools when using then at a dock or on the hard. One transformer will save you from having to buy both battery and corded versions of the same tools. Along with the cash savings, there would be a whole set of corded tools you wouldn't have to carry and stow... If you're the DIY type, you can gut a dead battery and install a transformer and full wave bridge rectifier to output the correct voltage... As to foam, '"two-component" foam or polyurethane foam is closed cell and waterproof, while denser and a bit heavier, it's used commercially by many contractors...
I’m alarmed by the shoddy craftsmanship found on so many boats.
It just shows that cost doesn’t always buy quality.
This is insane for 800k boat.
*never. I dare anyone to find a production cat that's actually worth the price. There are none.
@@asertait seems like HH has very good build quality. I know they are a bit pricey, but the new HH44 is more price competitive - especially taking into account the 'in practice' length of the hulls.
I'm pissed off and it's not even my boat!
@@mikaelkrogh2037 "It seems like XXX has good build quality" could be said of any new entrant, based on their PR. Until people start hacking them apart down the track, I'm not sure how anyone could actually know. With a custom build it's common for the client to inspect progress regularly (or have a reputable independent PM do that on their behalf, ideally somewhat unnanounced) but for series-built vessels it's not generally possible.
Well at least you did not find old filled trash bags in there, that would have been funny, this is actually sad! Also, you definitely don’t want too much adhesive between the keel and hull so that the keel actually brakes away and does not become the instrument of your destruction!
The sealant removal at 11.18 - 11.25 illustrated some of Mads hidden Salsa dance footwork. With music it has potential as a future TikTok video.
All I can say is WOW!!!
I'm a fan of commercial grade cordless tools. But only if I already own a full corded version!
If I needed to have a fiberglass boat built I would hire you as an Owner’s evaluator, and builder consultant BEFORE ordering any boat I was considering having built for me. Great work Mads.
These boats are series production, not made for individual clients. I agree that the latter mode is increasingly to be preferred for anyone who does not enjoy nasty surprises.
For getting the keel back up into the hull, I would think about a wooden frame to keep the repaired keel upright. I would have this frame on top of 2 or 3 automotive scissor jacks. They will have the throw required to lift the keel. They are strong enough to lift cars, shouldn't have a problem lifting the keel. McGyver a way to have a cordless drill turn the jack screws.
Might spiffy, Mads. Well done. If you want a new project boat, head to Florida. Plenty of hurricane wrecked projects there. See you and Ava on Oct 15 in Annapolis.
Oh Glorious Sanding!!
BEWARE! I know your a perfectionist but remember the keel is sacrificial so if your glueing it back up there is a reason it was not comprehensive,. It needs to move under catastrophic insult. Making it part of the hull removes the sacrificial aspect of the design. So when putting it back together ensure it is the first component to break -according to design! You had difficulty removing the keel so the glue was plenty strong enough for purpose.
Great job and investigation of the problem. Good luck with the project.
to put the keel back up easily try a hydraulic lift. One about 6' with side rails. remove the rails make a jig to hold it steady , roll it in place and raise!
Flip the sawzall blade around it's way easier gives you a more obtuse angle