VIILANTE STEERING WHEEL & NRG WHEEL HUB Install on a Fiat 500 Abarth - HOW TO!
Vložit
- čas přidán 24. 08. 2024
- In this video, we show you how to install a Viilante Steering Wheel and NRG Wheel Hub on a Fiat 500 Abarth. This also applies to the Fiat 500L, 500X and Dodge Dart. This video will apply to just about any aftermarket steering wheel.
WARNING: This modification requires the removal of the driver side airbag and is intended for OFF-ROAD and/or TRACK USE ONLY. NGEN Customs & Performance is NOT RESPONSIBLE AND/OR LIABLE for any damage or personal injury by performing this modification to your own vehicle. DO NOT PERFORM IF THE BATTERY IS STILL CONNECTED.
Tools Needed:
10mm wrench
Cutting Pliers
Needle nose Pliers
Miller Airbag Removal Tool (Part No: 10296)*
*5mm Allen Key can substitute for the Miller Tool
1/2” Socket Wrench**
**Electric Impact can substitute for the Socket Wrench
1/2” Socket Extension
15/16” Socket
Electrical Tape
Small Flathead (not mentioned in video)
Royalty-Free Music Provided by: iMovie
If you LIKE the video, please give it a THUMBS UP!
Make sure to SUBSCRIBE and hit the NOTIFICATION BELL so you never miss a video!
To purchase a steering wheel and NRG wheel hub for your Fiat, please click here:
ngencustomsand...
For all of your Fiat, Abarth & Dodge Dart performance parts, please visit our website at:
www.ngencustom...
Help support the channel by purchasing some of our merchandise! We offer hats, hoodies and t-shirts:
ngencustomsand...
Instagram:
@ngencustomsandperformance
Facebook:
/ngencustoms
Questions:
E-mail: info@ngencustomsandperformance.com
Call/Text: 832-948-9409
I'll be ordering a new wheel soon thank you for the detailed instructions
No problem! Thank you for watching!
Ah the tutorial i needed!! I just ordered mine a few days ago! Cant wait to install it.
I had to flash the airbag code to make the resistors work.
Great, I just bought this steering wheel. Thank you
Those hood vents look sick!
The resistors are very long cables and there are 2 other cables with the same length, that gives you problems in the end to assemble it as we see at the end of the video
I know this video is years old but hopefully still monitored! I have a 2015 jeep renegade I've been trying to put a quick release steering wheel in and have gone threw 2 "jeep" short hubs that didnt fit. I've heard this renegade is very similar to the fiat 500. Would the steering rack be the same as this?
I don’t know for sure. However, we did fit a 500 Abarth steering wheel on a 500L so it’s possible it might work on your renegade (same as a 500x). Only way to find out is to try it.
Where did you get nice abarth decal for airbag cover???
What kind of seat do you have ? there look awesome 😎
Cipher. We offer them on our website:
ngencustomsandperformance.com/shop/ols/products/ngen-performance-racing-seat-set-by-cipher-auto-premium-several-options-500-abarth-500t
Starting to disconnect the plus??
Do you sell the resistors on the website?? Or are they included with the steering wheel or hub when I buy?
Keith King they are included with the wheel hub
My issue with the NRG is the spline does not line up with the white dot and the whole hub itself is off a few degrees, vs my factory steering wheel lines up perfectly with everything. Did this hub lined up with the shaft and everything centered or did you have to get an alignment?
Same issue here
does your car deactivate hill start and stability control automatically after you have been driving for a while. mine has done it ever since i changed to an aftermarket wheel. it’s very annoying.
operamatt you need to recalibrate your steering angle sensor
So that resistor works on the steering wheel but not on the seat bags?
I’m going to try it soon as I’m ordering more resistors. If it does, you will still need a seat electrical harness.
What size of resistors needed?