Video není dostupné.
Omlouváme se.
An Amazing Random Orbital Sander Festool Doesn't Want You to See! 😱
Vložit
- čas přidán 1. 07. 2022
- Here is a quick review of the Max XT random orbital sander. A great alternative to Festool and Mirka sanders, A 6in 5.0mm orbit makes quick work and is very stable on the work piece. Link is below to purchase.
【Low Noise Sander】MAXXT random orbital sander with a 3A 350W brushless EC motor delivers stable speed, low noise, low maintenance requirements and a high degree of efficiency. The machine's low weight and minimal noise emissions enable flexible and low-fatigue work.
【Low Vibration Sander】Low vibrations for comfortable working in continuous operation. The vibration-optimised eccentric drive guarantees low vibration during operation and therefore pleasant working.
【Ergonomic Design】The symmetrical design of the random orbital sander 6 inch is suitable for both right-handers and left-handers. This sander is perfectly built for manual operation to reduce fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. The built-in overload protection ensures additional safety.
【High Efficiency】Unique brushless motor for maximum efficiency when sanding, even in continuous operation. EC technology results in longer life. For an optimum operating smoothness at speeds of up to 10,000 rpm.
【Low Maintenance】The multi-hole pad holder guarantees effective removal of the sanding dust in combination with an industrial vacuum cleaner. Due to no carbon brushes are used, the sander also requires significantly less maintenance.
Website - pruettwoodwork...
Our Instagram - / pruett_woodworking
Facebook - / pruettcustomfurniture
Amazon Storefront - www.amazon.com/shop/influencer-998afa47
MAXXT on Amazon - amzn.to/3NB6ZLz
MAXXT promo link. www.amazon.com...
#diy #woodworking #powertools #sander #randomorbital #workshop #festool #mirka #dustcollection #3m
Thanks for sharing your experience with this sander! Also, as a future suggestion, I think you should cut back on the time sanding in the video which was several minutes, especially since we can't actually see the sanding very clearly due to the single fixed camera angle.
Thank you for the input.
I just saw this sander on Amazon and I’m glad to find your video and channel showing this sander…
Awesome! Thank you!
thank you! This is great!
You are welcome
It looks like the new 3m sander!
It is almost identical
Thank you for this, can I use it without dust extractor? I am adamant buying it only because I don’t have extractor.
Yes, you can use it without a duster extractor it works just fine
Hi, does your sander also turn on the shop vac in auto mode even when turned off? Thanks for sharing
My sander does not turn on the vac. I had one of the switches that turned on the vac but it finally burned out and I have not replaced it. But yes if the sander was turned on by the power switch it would trigger the shop vac.
Thanks for the video.
Are you still satisfied with the sander?
Did you have any problems with it?
I still use both of them on every project. I am very pleased with them.
U know they get hot fast after long use qontiniusly idk how to Wright it but where the sand plate is attached to the machine afther 2 hours sanding and pulling the whole pad of it was almost like u had to use gloves to touch it is that normal
@@joeyvogel3807 Mine doesn’t get hot at all. And it shouldn’t if you have a vacuum attached.
Whell its just the part with the bolt and the counterweight
Great video, why the protective pad? I've never heard of those.
If you are using a mesh sanding disk you use the protective pad between the sanding disk and the factory pad to help protect the factory pad from damage.
great content
Thanks
Is that just a rebranded Mirka
Short answer no, it is more like the 3m sander but a lot of them are using the paddle switch now.
I do think so these days
I have bought one that is exact the same form a company HMB (netherlands) only difference is that it is bleu for 150 euro's
What is the protective devise you used under the sand paper?
I used a proterctive pad between rhe mesh sandpaper and the factory sanding pad. This is to keep you from wearing out the velcro on the factory pad.
What it it called and where can I get them?
It is available on Amazon.
6-in. Kingdom Abrasive Pro-Net Grip Faced (Hook and Loop) Pad Protector (5-Pack)
amzn.to/3CjCV3J
Is the brand "Max XT" or model. If model, what make is it? If you are hawking a piece of equipment, tell us about the equipment and less time demonstrating it
Max Tech is the brand and the model is r7303.
Hi I have looked on amazon can't find it can you give me the link please
Link is in the description and also here
MAXXT on Amazon - amzn.to/3NB6ZLz
Thank you
@@microcementlacalamijasspai8269 you are very welcome
Your link to sander said not available
It appears they are currently sold out on Amazon. But they are worth waiting for.
What is the purchase price ?
These run about 250-260 bucks.
👍👍👍
thanks
of course they don't want us to see this
I agree