I loved how fast it lifted the Bronco but as you said I wouldn't trust it enough to climb under the car without jack stands. Still, it's a cool product.
Agreed, realistically speaking no jack is made to really be holding the car up without a jack stand. I think this is an effective way to quickly get the car up and put jack stands underneath.
WARNING: you fitted the bottom part of the handle backwards and the air hose is mis-routed. The air hose needs to exit the slot in the handle like it does near the air controls. You've put the air line exiting the end of the handle in a pinch point where there's a chance of chafing. If that hose is ruptured the whole jack will instantly collapse. Stay safe.
Nice compact unit, you should lift the Bronco and take a measurement. Let it sit overnight and take another measurement and see how well it holds up over time.
Having the straight vertical lift could be much better than the arc a conventional jack has as it is lifted. Especially useful when lowering onto stands not having to calculate where to place the stands to compensate for the arc.
2:44 That's a safety blow off valve to release pressure if someone goes overboard with the pressure. I put a gauge on the release valve to see what it actually lifts at with the smaller 3 Ton version, and it's basically able to lift a compact car with about 35 psi. Doesn't need much pressure at all, and with the larger diameter ones, they need less pressure for the same lift capacity, just more air volume. You could probably use a bicycle pump to lift the car.
Great demo Barry, If you could get it under vehicle just under one side to left both ends off floor put jack stands under for safety. do you think would be safe enough to work with wheels off. Just asking I don't think I would go under with out a good solid stand . I like the jack if the price was wright. 👍👍
I’ve used it several times. Lifted my suburban up easily. I just put stands under for safety. It held the suburban up for a few hours with no air loss.
Now ya know Robert is gonna want one too. Looks cool to.
Loved your response first time you lifted Bronco! 😂
I loved how fast it lifted the Bronco but as you said I wouldn't trust it enough to climb under the car without jack stands. Still, it's a cool product.
Agreed, realistically speaking no jack is made to really be holding the car up without a jack stand. I think this is an effective way to quickly get the car up and put jack stands underneath.
That thing is cool! Faster than I thought it would be.
WARNING: you fitted the bottom part of the handle backwards and the air hose is mis-routed. The air hose needs to exit the slot in the handle like it does near the air controls. You've put the air line exiting the end of the handle in a pinch point where there's a chance of chafing. If that hose is ruptured the whole jack will instantly collapse. Stay safe.
The Wife says Do you need that why yes I do. Right tool for the job 🙂
Nice compact unit, you should lift the Bronco and take a measurement. Let it sit overnight and take another measurement and see how well it holds up over time.
Having the straight vertical lift could be much better than the arc a conventional jack has as it is lifted. Especially useful when lowering onto stands not having to calculate where to place the stands to compensate for the arc.
I like the air jack products. I am going to purchase two that I can use with my 4 post lift (that are designed for using on a lift). Good information.
I'm going to buy the 10 ton to lift my tractor.
Tube/bladder should be on outside on bottom, enter handle/tube through hole at bottom like exit hole on top, then no need to cut.
2:44 That's a safety blow off valve to release pressure if someone goes overboard with the pressure.
I put a gauge on the release valve to see what it actually lifts at with the smaller 3 Ton version, and it's basically able to lift a compact car with about 35 psi.
Doesn't need much pressure at all, and with the larger diameter ones, they need less pressure for the same lift capacity, just more air volume.
You could probably use a bicycle pump to lift the car.
Great demo Barry, If you could get it under vehicle just under one side to left both ends off floor put jack stands under for safety. do you think
would be safe enough to work with wheels off. Just asking I don't think I would go under with out a good solid stand . I like the jack if the price
was wright. 👍👍
I’ve used it several times. Lifted my suburban up easily. I just put stands under for safety. It held the suburban up for a few hours with no air loss.
hi barry very cool lack 👍👍👍👍👍👍👍👍😄
👍👍