You may get total less views, but these types of videos are my favorite. Complete builds, hour long videos. I've been waiting for another! Thanks!!! :)
Whoever has this Porsche, has HELLA money to blow, I looked up the price for just the dsp and saw 6,500$!!!!!! I bet it sounds freakin amazing though, well done job as always guys, I'm jealous.. lol
Man. He went with some top-notch equipment all the way around. Everything I've heard about the Brax DSP & amps is that the DSP is the best there is. The amps aren't far behind. Bravo fellas.
Amazing craftsmanship as always. I can't imagine that the factory Burmester system in not better than 90% of all car audio systems on the market. The client must be extremely demanding towards audio perfection.
Unfortunately the Burmester system is trash and once you take the cost into consideration it’s nothing short of upsetting. I bet the mid level Kenwood 5ch amp, door speakers, 10”sub and dsp would surpass it for a quarter the price.
Outstanding work 👏! Love all the fab work to make it look stock as it should be especially on a Porsche. Just goes to show that even high end cars doesn't necessarily mean they have high end audio equipment. Curious as to what the total weight of the amps and dsp combined and in your opinion, is their performance worth it as compared to other high end manufacturers?
That rack reminds me of a TV stand I had years back. I had it almost together and the last bits didn't work. Finally read the instructions. I had to put it together upside down. I guess at least I had instructions.
i want to see more of the nav tv zen V installation and software use. i have an audi that uses that zen V version. so It would be of a huge interest when you actually do the install video of it.
The quality and thought you guys put in your builds like this is amazing. A few questions about this install. Do those huge amps that are stacked in there so tight not generate a lot of heat and is that an issue? Also I know these are very high end amps and I am sure it sounds awesome but are they really worth all the effort to shoehorn them in when you could have used much smaller amps that would also sound very good?
I notice in your toolbox site , no wire , what size are you guys using for "stock"(ish) speaker wire when you do your O.E. colors , green,grey,white,purple and Im sure you have found the best vender for the best price , soooo please share that info !! ... (Mustang Mach460 , my car is a Roush, so Im leaving the original harness alone incase someone wants to restore the car one day, so, Ill just gut the car and run all new wires ... thanks for any info on that ...
First of all, fantastic work overall. The attention to detail and build quality that went into the integration of most of this system was very impressive. That being said, the subwoofer enclosure sort of ruined it for me. There was plenty of room behind the battery and under the panel to fit a different subwoofer design. Likewise, I'm sure those amps are very good pieces of equipment, but there are many other options that probably could have accomplished the same thing and also be hidden. I understand that isn't the primary reason for choosing the equipment in this build, but as nice as it is this illustrates to me that money can't buy everything. Would less expensive gear achieved the same results? Perhaps, or perhaps not. Nevertheless, for the amount of money this must have cost, I know you guys could have accomplished something very similar without sacrificing as much function.
I have multiple t400x4ad's can I tri-amp focal flax evo 3 way, if so any advice on frequencies of the crossovers? How do I assure I'm applying the proper wattage to each of the component speakers? How do I even know what each compinent speaker can handle? Technically at full range it's 375w to tri amp using multiple t400x4ad's anyone have advise?
Hello, Where are you located? I’m interested in your audio that you set up in Porsche Cayenne? How much it’s total cost and how many do you do this job? Thanks Alex
That was at least 20 grand just in hardware. Not counting all the deadening, custom fab work, installation time, tuning....it would not shock me at all to see a final bill around 40 grand
I don't even want to imagine how much the client will have paid for this impressive and perfect job. admiration and respect for you.
Yeah, it doesn't get much pricier than BRAX stuff.
You may get total less views, but these types of videos are my favorite. Complete builds, hour long videos. I've been waiting for another! Thanks!!! :)
Whoever has this Porsche, has HELLA money to blow, I looked up the price for just the dsp and saw 6,500$!!!!!! I bet it sounds freakin amazing though, well done job as always guys, I'm jealous.. lol
Man. He went with some top-notch equipment all the way around. Everything I've heard about the Brax DSP & amps is that the DSP is the best there is. The amps aren't far behind. Bravo fellas.
Bro puttin a nice used car in his system.
Haha I'm loving it.
Love these full vids too.
Dean, those tweeter mounts are absolutely beautiful. You get what you pay for ladies and gentlemen.👌🏻
OMG I'm sure that install made your brain go numb. Superb install guys!!
Amazing craftsmanship as always. I can't imagine that the factory Burmester system in not better than 90% of all car audio systems on the market. The client must be extremely demanding towards audio perfection.
That's not saying much. Even the highest end upgraded OEM sound systems are substandard.
Unfortunately the Burmester system is trash and once you take the cost into consideration it’s nothing short of upsetting. I bet the mid level Kenwood 5ch amp, door speakers, 10”sub and dsp would surpass it for a quarter the price.
Drool-worthy system and amazing work gentlemen! One note I mean in the nicest way possible: there is no “h” in “Toslink”. ;)
As usual D&F very professional ... No doubt ... Thanks
The last time I saw brax & helix products was 20yrs ago didn't know they where still in production
They been ruling the SQ market !
Work of art guys, wish i could experience that sound!!!
Outstanding work 👏! Love all the fab work to make it look stock as it should be especially on a Porsche. Just goes to show that even high end cars doesn't necessarily mean they have high end audio equipment. Curious as to what the total weight of the amps and dsp combined and in your opinion, is their performance worth it as compared to other high end manufacturers?
Good lord!! That was insane! Y'all did an amazing job as always! Can't wait until the day I can afford something like that! Lol
crazy impressive work! wow!
TOSLINK (from Toshiba) is a standardized optical fiber connector system.
I bet this sounds absolutely incredible. ❤❤❤
In the door panels i first time i am seeing factory radiators for the original sound system. Wow.
That rack reminds me of a TV stand I had years back. I had it almost together and the last bits didn't work. Finally read the instructions. I had to put it together upside down. I guess at least I had instructions.
What and amazing install and so complicated
You a the best great video
I can binge watch all of your videos
Any suggestion on a 2021 Honda pilot touring how to run a power wire through the firewall
i want to see more of the nav tv zen V installation and software use.
i have an audi that uses that zen V version. so It would be of a huge interest when you actually do the install video of it.
Awesome install. 👌
The quality and thought you guys put in your builds like this is amazing. A few questions about this install. Do those huge amps that are stacked in there so tight not generate a lot of heat and is that an issue? Also I know these are very high end amps and I am sure it sounds awesome but are they really worth all the effort to shoehorn them in when you could have used much smaller amps that would also sound very good?
Dang. Homie removed the brewmeister from the poorsh.
I notice in your toolbox site , no wire , what size are you guys using for "stock"(ish) speaker wire when you do your O.E. colors , green,grey,white,purple and Im sure you have found the best vender for the best price , soooo please share that info !! ... (Mustang Mach460 , my car is a Roush, so Im leaving the original harness alone incase someone wants to restore the car one day, so, Ill just gut the car and run all new wires ... thanks for any info on that ...
Absolute awesome job guys! wow. from the fab work to finish work great job.
Hot box.
another awesome build....
C'mon,it's Brax Matrix.Only Morel Supremo and Focal Utopia can be on the same level as that.
I have a question, how come y'all don't do more High Resolution car audio installs???????
Probably because not many dogs drive cars :)
I wish this was an F150 instal 😢
Yeah that couldn't have been less than 20k!
First of all, fantastic work overall. The attention to detail and build quality that went into the integration of most of this system was very impressive. That being said, the subwoofer enclosure sort of ruined it for me. There was plenty of room behind the battery and under the panel to fit a different subwoofer design. Likewise, I'm sure those amps are very good pieces of equipment, but there are many other options that probably could have accomplished the same thing and also be hidden. I understand that isn't the primary reason for choosing the equipment in this build, but as nice as it is this illustrates to me that money can't buy everything. Would less expensive gear achieved the same results? Perhaps, or perhaps not. Nevertheless, for the amount of money this must have cost, I know you guys could have accomplished something very similar without sacrificing as much function.
When your dentist goes hood....
No brah. All that fir jazz and classical music maybe some 80's rock lol
I can’t even figure out pricing for the speakers?
I have multiple t400x4ad's can I tri-amp focal flax evo 3 way, if so any advice on frequencies of the crossovers? How do I assure I'm applying the proper wattage to each of the component speakers? How do I even know what each compinent speaker can handle? Technically at full range it's 375w to tri amp using multiple t400x4ad's anyone have advise?
Hello, Where are you located? I’m interested in your audio that you set up in Porsche Cayenne? How much it’s total cost and how many do you do this job?
Thanks
Alex
That was at least 20 grand just in hardware. Not counting all the deadening, custom fab work, installation time, tuning....it would not shock me at all to see a final bill around 40 grand
Top
Good job my friends God-bless you be Safe
I wonder how much weight was added to the Porsche lol.
I’m glad I wasn’t there only one thinking the same thing, but I’m assuming the owner doesn’t care.
What is the song title you play at 1:16:30?
My drool typed dat...
25,000$ install not counting the cost of the equipment?….
$10,000 or more easy
Omg it drives me nuts when you say toshlink. It’s pronounced toss- link. I’m sorry but it drives me nuts.
Disgusting that all that beautiful gear was done as a stealth install. You should be ashamed
TOSlink
BURmester
🙂
I cringed every time haha
No, this is different. It was developed by Daniel Tosh. When he's not doing comedy, he designs optical fiber connector systems.