Glowe Voltage Series 1 assembly - what’s in the box??

Sdílet
Vložit
  • čas přidán 13. 09. 2024
  • This is the start to finish assembly process of our Glowe Voltage Series 1 battery.
    www.glowevoltage.com

Komentáře • 33

  • @mosesmartinez7864
    @mosesmartinez7864 Před 11 měsíci +2

    Im saving for the v2 as we speak hopefully yall restock soon👍🏽

  • @denvermatt
    @denvermatt Před 2 měsíci

    Can you run these laying down?

  • @paulbarrette2557
    @paulbarrette2557 Před rokem

    Problem is that with an active balancer... you will actually put your cells OUT of balance since it is on all the time. It should ONLY balance when the cell are over 3.4-3.45volts. You need to put in a 'smart' version so you only balance at higher voltages (configurable).

    • @GloweIndustries
      @GloweIndustries  Před rokem +4

      Oh.

    • @GloweIndustries
      @GloweIndustries  Před 2 měsíci

      @@paulbarrette2557 Heltec 5a active balancers turn off below 2.7v a cell.

    • @paulbarrette2557
      @paulbarrette2557 Před 2 měsíci

      @@GloweIndustries Good but it should be turned off under 3.45 volts ... not 2.7. You should only active balance when 1 cell starts to go overs 3.45 volts.

  • @moderngunguy3666
    @moderngunguy3666 Před 10 měsíci

    What kind of batteries are these?

  • @TrunkThunderLithium
    @TrunkThunderLithium Před rokem +2

    Killer video idea!!! Show em that aint no need to hide shit! Its nothing but the best! NOTHING!!! but the best.. 😎 jehu my wallet with used cells FOH!!!

  • @SoberBassHead
    @SoberBassHead Před rokem

    No sound?

  • @moderngunguy3666
    @moderngunguy3666 Před 10 měsíci

    So which battery do you think is best for a truck charging at 14.6 to 14.8 voltage "can be higher with adjustable voltage regulator" and a sundown salt 8 oh yeah and a 400amp alternator??

    • @GloweIndustries
      @GloweIndustries  Před 10 měsíci

      Are you keeping oem battery? If so probably a single Series 3. ( check out our channel for more info )
      If replacing oem battery and running only a single Glowe? S2.

    • @moderngunguy3666
      @moderngunguy3666 Před 10 měsíci

      @@GloweIndustries at the moment I have headways running the whole truck because The front battery died on me so I've just been running it off the headway bank. But yes I can get a new front battery if needed. But I do kind of like not having to run a battery isolator.. But obviously looking to get the most out of my setup.

    • @moderngunguy3666
      @moderngunguy3666 Před 10 měsíci

      @@GloweIndustries yeah I'm thinking maybe two of your series 2s

    • @GloweIndustries
      @GloweIndustries  Před 10 měsíci +2

      @@moderngunguy3666if you’re going 2 of them, the Series 3 is back to being recommended I.
      I’m doing a 24k watt build with a pair of S3 being all that’s in the car.

    • @moderngunguy3666
      @moderngunguy3666 Před 10 měsíci

      @@GloweIndustries Okay sounds good yeah I think I want to get the most amount of amps out of it to get the usable power. I'm going to do a little more research and make my decision thanks for your help

  • @americannumber2
    @americannumber2 Před rokem

    No bms

    • @GloweIndustries
      @GloweIndustries  Před rokem

      Correct. These are for car audio use.

    • @TrunkThunderLithium
      @TrunkThunderLithium Před rokem

      A BMS that would allow the amount of amperage needed for car audio use would be like an added $100+ in cost atleast. For a good reliable one

    • @G.I.Joe-
      @G.I.Joe- Před rokem +1

      I didn't know a BMS wasn't needed for this type of battery. I was told it was necessary so the battery could be charged & discharges safely. Is this just for solar panel use when equipped with BNS?

    • @TrunkThunderLithium
      @TrunkThunderLithium Před rokem +1

      @@G.I.Joe- mostly an RV. But they also help ppl from doing damage to batteries they aren't rated to for a high C rating. Let's say the cells in series aren't supposed to be discharged over 200a continuous. That's when a BMS becomes mandatory. Especially for those companies who sell them an label them as such. If it's gets damaged by your doing then safety becomes a factor an your displeased view when the battery messes up however an you try to return it. Helps an protects everyone. Helps also from over charge of course. But considering most car audio ppl either charge their stuff with a preset charger they can't control. Or if they do use a variable power supply. They have the were with all an brains not to overcharge like an idiot. I recently had an issue myself tryna learn this new power supply I got. But I also ain't an beginner nor am I a expert. I just love the hobby an the science behind it. I like building the banks an what not. Big kid hobbies 😂🤙

    • @americannumber2
      @americannumber2 Před rokem

      @@G.I.Joe- I think your PE teach told you that?