2013 Ram 3.6 MIL On, Code P0456
Vložit
- čas přidán 16. 05. 2024
- This 2013 Ram with a 3.6 litre engine as brought in due to the MIL being on. Scan retrieved code P0456 for small leak detected. Although I found aTSB for a PCM recalibration I was unable to pinpoint the cause for the code. The ESIM switch could be sticking occasionally.
- Auta a dopravní prostředky
Mr. Phillip I really like your videos it is very benefit for us I work as a mechanic I have learned a lot of stuff from you think you very much
Thanks for taking the time to watch me.
is this the same one you did engine and timing chains
No different truck.
Hi Philip, I have a mitsubishi lancer 1980 with points, and i have a 6,5 amber current draw in ignition switch on, 3 from ignition coil, and 3,5 from the mechanical voltage regulator,can you tell if it's normal draw thanks
I'm not sure what you are asking? What is the actual problem with the vehicle?
@@PhillipBailey the problem is parasitic drain
@@geoepi321975 that is checked with the ignition switch off
@@PhillipBailey yes I know i have 20 ma when the switch is off, but I don't know if the 3.5 ambers of draw of the mechanical regulator is normal when it is on the switch