Our Inverter Mini Split Resources: Mini Split Book on Our Website- www.acservicetech.com/mini-split-book Mini Split Paperback on Amazon- amzn.to/3ytHJSs Mini Split Paperback on TruTech Tools- www.trutechtools.com/BooksGuides Mini Split E-Book on Google- play.google.com/store/books/details?id=HN-iEAAAQBAJ Mini Split E-Book on Apple- books.apple.com/us/book/id6445178399 Our Single Speed and Two Speed Air Conditioning Resources: My Paperback and E-Book: www.acservicetech.com/the-book My Paperback: www.amazon.com/shop/acservicetech Check out our new Articles at www.acservicetech.com/articles Support the Channel: www.patreon.com/acservicetech Tool List: www.amazon.com/shop/acservicetech Check out our HVAC Calculators at www.acservicetech.com/hvac-calculators Try our new quizzes! Do you have what it takes? www.acservicetech.com/quizzes Check out our Podcast! www.acservicetech.com/podcast Follow us on Facebook! facebook.com/acservicetech Follow us on Instagram! instagram.com/acservicetech
Craig you set the bar when it comes to educating your audience. The Audio/Video quality, your explanations and expertise is what sets you apart from other videos. Thank you... The education in these videos is priceless. 1. From the Technician side: Sets the Gold standard on "How to". Many technicians rather short cut these processes. 2. This shows the client how complex the process is and time consuming when properly done. 3. Educates the client on the expertise required, what to expect from the service tech and how to properly protect their investment.
Glad that manufacturers are beginning to take the cleaning process into consideration by making it easier to access the indoor coil. But there are still way too many error-prone steps IMHO.
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) czcams.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
I NEVER use corrosive cleaners. Sometimes you need not have to remove the blower wheel if you use a good pressure sprayer with the right hose end sprayer. Just rotate and spray. I built a sprayer from a 80 psi low gpm 12v water pump and a 12v 7ah dry battery with a 2.5 gallon sprayer jug. Got the stainless steel adjustable sprayer head from a pest control site. About $160.00 for it all and it has done well for about 9 years now and is very portable. Dawn detergent and windex works wonders on coils. Been using it for many decades. Oily coils get cleaned well with 409.
A HUGE disadvantage of mini split. Here in South Cali this job would cost around $800. And people who installed mini splits usually can’t afford to install central HVAC. But it’s a great option for a flat. In Europe those types of mini splits is very popular and been used for decades already.
The C&H Astoria series and the Carrier Performance series ductless wall heads are significantly easier to disassemble and clean. Most other ductless wall heads are like this one, quite difficult and delicate to disassemble and clean. I put my blower wheel into the dishwasher once I have it removed. I hope more people buy ducted cassette style indoor units and install them with a filter grille that accepts widely available disposable MERV 8-13 filters. Those filters good enough to keep the cassette clean for a long time unlike the mesh filters on ductless wall heads that are lackluster filters. Ducted cassette cost a bit more upfront and take more planning to install but you get better conditioned air distribution and much lower maintenance costs.
For those of you not wanting to spend this much on a pressure washer, buy the battery powered DeWalt power washer, it's 500 psi but you can buy larger orifice tips to lower the pressure.
Thank you for the great tutorial! Looking to do this preventative maintenance on my LG multi F system. I see the links to all the equipment used in the video description, except the bib kit.
As always I can't stop myself from watching your videos such a nice videos. I am residential maintenance technician we don't service these types of unit however, maintenance these unit are also very time consuming .
In the video clip section about the super dirty coil. If you wait that long to clean a ductless indoor unit you will likely develop indoor air quality issues and health issues. Don't wait until it gets that bad to schedule a deep cleaning. And that video clip show the indoor coil completely removed and disconnected from the refrigerant lines. A service tech performing a cleaning on a working unit will never recover the refrigerant, disconnect the indoor unit from the lineset just to clean the coil outside. Because that would mean upon reassembly they'll need to reflare line set connections, perform a temperature compensated pressure decay test, and vacuum decay test, and recharge the system. Surely that is too expensive and too much work for just a cleaning.
Excelent video. Thanks. Congrats I would like to see a kind of removable door or cover, to remove the turbine-fan more easy instead of lift up the evap.
I must admit it is refreshing to see someone else struggle a bit to decipher and break in to a mini-split indoor unit to clean it!🤣 "Each unit is different," he says! Good stuff, Craig. I'm going to comment a bit on my experience with the Coil Jet 125. Overall it is a great tool but (at least on mine) the bottom plastic cover is a bit too thin, fragile. Plus, four convex dimples integrated into the bottom plastic cover take all the weight. Mind you I wasn't rough with it, dropped it, etc... it was actually sitting on a shelf when I removed it to load on to the truck. Suddenly, I noticed some broken plastic pieces were left behind. This is a bit underwhelming to see in less than 4-months ownership. Lastly, CJ should offer an option/version that allows techs to use existing battery platforms vs. your daddy's old 12VDC deep cell LA battery. Sure, the included battery works well, but it is 2023 and professionals have (or should have) plenty of Li-ion batteries ready to go. Luckily, I'm not waiting.😉
The supco porta blaster is another option for about a third of the price. Not cordless but if you have Milwaukee M18 batteries the top off works to power it and you can draw water from whatever container you like. I use 3 buckets, one for clean water, one for dirty water and one for holding the wet stuff when I’m fetching more clean water or dumping dirty water.
There was a test done, do you rinse first, or apply soap first. The results were to soak it in soap BEFORE you rinse. If you rinse it first you are diluting the soap as it's applied. Just a tip for next time!
Why would a pro HVAC guy like the CZcams influencer, Steve Lavimoniere, say that it's best to clean the outdoor compressor coils with just plain water at low pressure from a garden hose? He says those specialty coil cleaning solutions shorten the life of mini-splits and put an unneeded film on the coil surfaces reducing heat transfer. I really trust this guy. He's a straight shooter and not interested in padding customers bills.
I love your videos. I'm a plumbing apprentice working in Canada. My company has an ac service department and I'm eager to learn. How applicable is your ac service book to the Canadian climate?
Our refrigerant charging book is for air conditioners only but our Inverter Minisplit book is certainly applicable to the climate in heating and ac mode along with electrical, thanks!
This channel has been an inspiration to my career. I felt like I became a better technician and more confident in my work. Thank you very much and please keep doing a great job
@@USA-GreedyMenOfNoIntegrity Not that expensive to get a little one for a pressure washer these days. This especially matters when near the ocean like shown here.
Don't want to be "blamed" for breaking a system. LOL Selling the house, had a company come out to check the package unit. He tested the capacitor and pressures. All good. He's packing up to leave notice the fan is going the wrong way. I suggested he check the wiring to the capacitor sure enough he hooked up the wires wrong. made sure he checked the capacitor again, sure enough it was now out of spec. Thankfully he had a the right cap on the van. Moral of the story, a professional is someone who gets paid for the work. Doesn't meant hey are experts or with out flaws. Either do it yourself or double check a professionals work.
I find that if you remain loyal to one very well trained, experienced HVAC contractor, you won’t have issues like this. When you jump around to get the quickest guy out on the service call, they don’t have any loyalty to you either. Kind of like marriage.
@@USA-GreedyMenOfNoIntegrity Its not a matter of loyalty, but a matter that reflects the quality of work. Unfortunately this day and age, there are more unqualified techs that don't even know what they don't know; so consequently they thought they know.
Craig does 3psi Nitrogen flows through the compressor or pass through when brazing it in? It’s does why? If the nitro doesn't flow thru, does it build up inside the compressor? Thanks
If I'm only ever going to clean my own minisplits, is it worth it to invest in something as expensive as a Coil Jet or Turbo Tank, or are these things overkill for nonprofessional use?
People are willing to pay for people to mow their lawns or even pay to leaf blow leafs cause they are scary. People need to stop talking down trades. Pay or not, no one forces you to pay what you think is a high price.
I dunno that cleaning process seems like a long time with many opportunities to screw something up. This is a 600$ job all day long…. This seems like it should be a once every 5 year job. Doesn’t make economical sense to do it every year
@Ness Nesu I'm also a landscaper as well. 😁 I get what you say that people talk down respectable trades. Sometimes not willing to pay accordingly. We work hard and master our trades. You know it's the service that someone brings to the customer that matters in this business. I take pride in my work and take care of my people. Just saying.
Good timing on this. I did surround my unit with a patio mist setup filtered and all but still got build up. What should I use for that? I've got a sodium exchange water softener plus a filter and still... What the traditional coil cleaner solution do the job?
I have heat pump i was cleaning coil on now unit won’t even turn on does anyone know what can I try to turn it back on customer changed the thermostat battery while I was cleaning so now won’t come on 😮😢
Try first checking you have power coming to the outdoor unit. Maybe the the disconnect plug is not well connected. Check the fuses in the disconnect box. Check that all the wires are well tied in the outdoor unit and the indoor unit as well. You can star doing that.
What a bunch of junk plastic, hard to reach screws and bib to deal with for maintenance. I only service MY Fujitsu or Ameristar that I installed. Other cheapskate customers or DIY’ers can get their weekend jacklegs to do their PM’s. You can buy a new indoor unit for the cost of a maintenance on one of those systems.
Our Inverter Mini Split Resources:
Mini Split Book on Our Website- www.acservicetech.com/mini-split-book
Mini Split Paperback on Amazon- amzn.to/3ytHJSs
Mini Split Paperback on TruTech Tools- www.trutechtools.com/BooksGuides
Mini Split E-Book on Google- play.google.com/store/books/details?id=HN-iEAAAQBAJ
Mini Split E-Book on Apple- books.apple.com/us/book/id6445178399
Our Single Speed and Two Speed Air Conditioning Resources:
My Paperback and E-Book: www.acservicetech.com/the-book
My Paperback: www.amazon.com/shop/acservicetech
Check out our new Articles at www.acservicetech.com/articles
Support the Channel: www.patreon.com/acservicetech
Tool List: www.amazon.com/shop/acservicetech
Check out our HVAC Calculators at www.acservicetech.com/hvac-calculators
Try our new quizzes! Do you have what it takes? www.acservicetech.com/quizzes
Check out our Podcast! www.acservicetech.com/podcast
Follow us on Facebook! facebook.com/acservicetech
Follow us on Instagram! instagram.com/acservicetech
Craig you set the bar when it comes to educating your audience. The Audio/Video quality, your explanations and expertise is what sets you apart from other videos. Thank you... The education in these videos is priceless. 1. From the Technician side: Sets the Gold standard on "How to". Many technicians rather short cut these processes. 2. This shows the client how complex the process is and time consuming when properly done. 3. Educates the client on the expertise required, what to expect from the service tech and how to properly protect their investment.
Thank you so much for your encouragement Carlos!!!
Glad that manufacturers are beginning to take the cleaning process into consideration by making it easier to access the indoor coil. But there are still way too many error-prone steps IMHO.
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) czcams.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
2-3 hour process. $400-$600 job.
not bad right?
I NEVER use corrosive cleaners. Sometimes you need not have to remove the blower wheel if you use a good pressure sprayer with the right hose end sprayer. Just rotate and spray.
I built a sprayer from a 80 psi low gpm 12v water pump and a 12v 7ah dry battery with a 2.5 gallon sprayer jug. Got the stainless steel adjustable sprayer head from a pest control site. About $160.00 for it all and it has done well for about 9 years now and is very portable.
Dawn detergent and windex works wonders on coils. Been using it for many decades. Oily coils get cleaned well with 409.
I like to work without music. I wish you success. Good work
A HUGE disadvantage of mini split. Here in South Cali this job would cost around $800. And people who installed mini splits usually can’t afford to install central HVAC. But it’s a great option for a flat. In Europe those types of mini splits is very popular and been used for decades already.
One of the finest demonstrations . So much to do on these mini splits for maintenance .
Your right!! Thank you for enjoying the video!
The C&H Astoria series and the Carrier Performance series ductless wall heads are significantly easier to disassemble and clean. Most other ductless wall heads are like this one, quite difficult and delicate to disassemble and clean. I put my blower wheel into the dishwasher once I have it removed. I hope more people buy ducted cassette style indoor units and install them with a filter grille that accepts widely available disposable MERV 8-13 filters. Those filters good enough to keep the cassette clean for a long time unlike the mesh filters on ductless wall heads that are lackluster filters. Ducted cassette cost a bit more upfront and take more planning to install but you get better conditioned air distribution and much lower maintenance costs.
For those of you not wanting to spend this much on a pressure washer, buy the battery powered DeWalt power washer, it's 500 psi but you can buy larger orifice tips to lower the pressure.
Thank you for the great tutorial! Looking to do this preventative maintenance on my LG multi F system. I see the links to all the equipment used in the video description, except the bib kit.
As always I can't stop myself from watching your videos such a nice videos. I am residential maintenance technician we don't service these types of unit however, maintenance these unit are also very time consuming .
In the video clip section about the super dirty coil. If you wait that long to clean a ductless indoor unit you will likely develop indoor air quality issues and health issues. Don't wait until it gets that bad to schedule a deep cleaning. And that video clip show the indoor coil completely removed and disconnected from the refrigerant lines. A service tech performing a cleaning on a working unit will never recover the refrigerant, disconnect the indoor unit from the lineset just to clean the coil outside. Because that would mean upon reassembly they'll need to reflare line set connections, perform a temperature compensated pressure decay test, and vacuum decay test, and recharge the system. Surely that is too expensive and too much work for just a cleaning.
Excelent video.
Thanks. Congrats
I would like to see a kind of removable door or cover, to remove the turbine-fan more easy instead of lift up the evap.
I must admit it is refreshing to see someone else struggle a bit to decipher and break in to a mini-split indoor unit to clean it!🤣 "Each unit is different," he says! Good stuff, Craig. I'm going to comment a bit on my experience with the Coil Jet 125. Overall it is a great tool but (at least on mine) the bottom plastic cover is a bit too thin, fragile. Plus, four convex dimples integrated into the bottom plastic cover take all the weight. Mind you I wasn't rough with it, dropped it, etc... it was actually sitting on a shelf when I removed it to load on to the truck. Suddenly, I noticed some broken plastic pieces were left behind. This is a bit underwhelming to see in less than 4-months ownership. Lastly, CJ should offer an option/version that allows techs to use existing battery platforms vs. your daddy's old 12VDC deep cell LA battery. Sure, the included battery works well, but it is 2023 and professionals have (or should have) plenty of Li-ion batteries ready to go. Luckily, I'm not waiting.😉
The supco porta blaster is another option for about a third of the price. Not cordless but if you have Milwaukee M18 batteries the top off works to power it and you can draw water from whatever container you like. I use 3 buckets, one for clean water, one for dirty water and one for holding the wet stuff when I’m fetching more clean water or dumping dirty water.
Toilet brush with long handle works good as you are able to spin it under the evaporator coil....
There was a test done, do you rinse first, or apply soap first. The results were to soak it in soap BEFORE you rinse. If you rinse it first you are diluting the soap as it's applied. Just a tip for next time!
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
🤘⚡️🤘✨✨✨
The ol SCRUBADOOSKI
As always..Stellar video!
Good eye on that Caterpillar 👍
So satisfying cleaning
As I always say, don’t be crazy cleaning the coils. You can’t make it brand new. Great tutorial.
Best video ever seen
Y aquí en México muchos regalando el trabajo,dicen que si no desinstalas el equipo no está bien hecho el mantenimiento 😒
Great video, thanks, Craig.
Why would a pro HVAC guy like the CZcams influencer, Steve Lavimoniere, say that it's best to clean the outdoor compressor coils with just plain water at low pressure from a garden hose? He says those specialty coil cleaning solutions shorten the life of mini-splits and put an unneeded film on the coil surfaces reducing heat transfer. I really trust this guy. He's a straight shooter and not interested in padding customers bills.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍. Great work, Craig.
My maintenances would improve greatly with this Montage Music
Been waiting for this kinda content for a while now. Good job as always Caig!
Would you ever recommend an Evap No Rinse coil cleaner for the inside coil on a mini split? Thanks again for all the great videos
Holy cow I have 6 of those inside units💵
Good video
I love your videos. I'm a plumbing apprentice working in Canada. My company has an ac service department and I'm eager to learn. How applicable is your ac service book to the Canadian climate?
Our refrigerant charging book is for air conditioners only but our Inverter Minisplit book is certainly applicable to the climate in heating and ac mode along with electrical, thanks!
Bedankt
thank you so much for the encouragement!
This channel has been an inspiration to my career. I felt like I became a better technician and more confident in my work. Thank you very much and please keep doing a great job
Nice video sir
The water you use, matters. Technically you should have a little DI water 'filter" on there to remove PPM.
Not gonna happen
@@USA-GreedyMenOfNoIntegrity Not that expensive to get a little one for a pressure washer these days. This especially matters when near the ocean like shown here.
Don't want to be "blamed" for breaking a system. LOL Selling the house, had a company come out to check the package unit. He tested the capacitor and pressures. All good. He's packing up to leave notice the fan is going the wrong way. I suggested he check the wiring to the capacitor sure enough he hooked up the wires wrong. made sure he checked the capacitor again, sure enough it was now out of spec. Thankfully he had a the right cap on the van. Moral of the story, a professional is someone who gets paid for the work. Doesn't meant hey are experts or with out flaws. Either do it yourself or double check a professionals work.
I find that if you remain loyal to one very well trained, experienced HVAC contractor, you won’t have issues like this. When you jump around to get the quickest guy out on the service call, they don’t have any loyalty to you either. Kind of like marriage.
@@USA-GreedyMenOfNoIntegrity Its not a matter of loyalty, but a matter that reflects the quality of work. Unfortunately this day and age, there are more unqualified techs that don't even know what they don't know; so consequently they thought they know.
How much does this service currently cost?😊
Would like your opinion. Should I install a soft start on my new Goodman 2.5 ton condensing unit ? Thank you !!
Craig does 3psi Nitrogen flows through the compressor or pass through when brazing it in? It’s does why? If the nitro doesn't flow thru, does it build up inside the compressor? Thanks
Scotchbrite on paint is NOT a good idea... BTW I bought 2 of your books and reference cards, great work!
If I'm only ever going to clean my own minisplits, is it worth it to invest in something as expensive as a Coil Jet or Turbo Tank, or are these things overkill for nonprofessional use?
Overkill
Do you ever lubricate the blowerwheel shaft with silicone grease?
Where did you get that little black brush that cleaned the underside of the dirty coil that gets in the corners? Thanks.
What instrument are you using there to check the systems operation @ 40sec in .. Delta T
I'm pretty pretty sure that this is some rebranded Midea AC... 100%
Who makes this bib kit?
SpeedClean CJ from Trutechtools. You can use code "acservicetech" for 8% off thanks!
what's a safe psi to clean the coils?
I wish my company would pay for this machine. I have no water access on the rooftop so I have to run 2 500’ hoses lol
The co jet cleaner! Is it available in Namibia
Hey, do you think people are willing to pay for such cleaning, it takes a long time.
It does take time, but in the long run, it's well worth it. I've cleaned traditional units in the past.
Definitely indoor coils can get really bad which will actually cause them to leak/not heat or cool properly. When you need a bib kit it’s pretty bad.
People are willing to pay for people to mow their lawns or even pay to leaf blow leafs cause they are scary. People need to stop talking down trades. Pay or not, no one forces you to pay what you think is a high price.
I dunno that cleaning process seems like a long time with many opportunities to screw something up. This is a 600$ job all day long…. This seems like it should be a once every 5 year job. Doesn’t make economical sense to do it every year
@Ness Nesu I'm also a landscaper as well. 😁 I get what you say that people talk down respectable trades. Sometimes not willing to pay accordingly. We work hard and master our trades. You know it's the service that someone brings to the customer that matters in this business. I take pride in my work and take care of my people. Just saying.
Good timing on this. I did surround my unit with a patio mist setup filtered and all but still got build up. What should I use for that? I've got a sodium exchange water softener plus a filter and still... What the traditional coil cleaner solution do the job?
I have heat pump i was cleaning coil on now unit won’t even turn on does anyone know what can I try to turn it back on customer changed the thermostat battery while I was cleaning so now won’t come on 😮😢
Try first checking you have power coming to the outdoor unit. Maybe the the disconnect plug is not well connected. Check the fuses in the disconnect box. Check that all the wires are well tied in the outdoor unit and the indoor unit as well. You can star doing that.
@@fernandorosillocorrales6331
I have power in to unit power out I couldn’t get 24 volts to my contacter
@@ejohnfallthe transformer that is giving the 24 volts needs to be checked. The connections on the board as well.
@@fernandorosillocorrales6331
I was going to replace the board
Blown fuse
Ain’t no body got that much time per job to do that.
Good morning, why do I learn it in English? When I go to any other country, everyone understands English
No caterpillars were injured in this video !!
There are foam products that are sold in cans for about 15$ and they work extremely well. Then just hose it off
The CoilJet Cleaner needs an award for most overpriced tool on the market today - literally paying for a two resoviour low pressure washer
What a bunch of junk plastic, hard to reach screws and bib to deal with for maintenance. I only service MY Fujitsu or Ameristar that I installed. Other cheapskate customers or DIY’ers can get their weekend jacklegs to do their PM’s. You can buy a new indoor unit for the cost of a maintenance on one of those systems.
In my opinions Fujitsu are throw away units, low quality internals. Mitsubishi is the way to go for splits, great tech support and they last forever
Such a pain in the arse
This guy has an accent, which I can't tell where in the US he is from. Just listen to how he pronounces the word "coil"