Great job Art! You explain the process very well. Many techs are great at repairing, but they can't explain and teach very well at all. You are awesome!
Thank you so much, my friend! You saved me and my psyche! It's only thanks to you and your video that I was able to align those crazy keys in my right hand! Thanks again!
Hello there. Just wanted to say . You have a great channel. I'm not afraid to tackle any problem I have with my instruments. Awesome tutorials. Steve from mass.
My alto sax's F key needs to be adjusted but it does not have the adjustment screws on the back like your does at 6:13. How do I adjust the key with this kind of sax?
This video is so helpful and informative. I have a request. I realize you are busy and have a new baby so this would just be for future topic idea. But there are so many "cheap" saxophones being bought for new players or people on tight budgets. It seems that a common issue is lower keys not closing. Do you encounter this at your shop? Most of your videos are on quality equipment but how can you make a cheaper sax play better? Also. Many new ones come in colors and lacquer metallic. What can you clean these with? Asking as I bought my niece one of these cheap amazon saxes and want to make it as good as I can for her.
My saxophone has a problem with the G key to below key can't play low note even I didn't touch the octave key. It's high note at all time. Do you know where is the problem source..thnks
Here are some links to some videos that may help. "Saxophone Octave Problems That Are Easy To Repair: //czcams.com/video/RUiwoNulYkw/video.html "Adjusting and Understanding the Sax Octave Mechanism" czcams.com/video/JxpD8_Hq97M/video.html I hope this helps. Art
Hi! I own a Selmer Paris Super Action 80´s Series II alto sax. I can´t find the screws to regulate the low D, E and F in relation to the F#. Can you help me?
You can go to your local repair shop. They should be able to order them from Allie Supply for you. If that does not work, I may be able to send you some.
I realize I’m replying to an old comment, but the Selmer saxes I’ve played don’t have adjustment screws for the mechanism that Art is seen regulating at 5:10 in this video. Instead you have to fuss with the thickness of the felt or cork between those arms and the bar that closes the F#. I confess I’m a player and not a technician though!
Either will work. Bending the foot of the key can work better in some cases, but not in others. When the keys are out of adjustment, but in regulation, bending the key will keep it in regulation while putting it into adjustment. if you turn a screw, it will put it into adjustment and take it out of regulation.
I came to this video to maybe find out how to use the pad height tool and you just show one and then say it won't be needed because you will already know how far open the pads should be if you've done a few adjustments before. Well, I haven't done any before, so you were no help at all in actually using the tool. Your video made no claims to show how to use this tool. Can you tell me where I might find information that will tell exactly how to use the gauge tool and which holes get which height? I am finding it very hard to find any info on proper use for this tool. Which pads get what height must be a secret no one wants anybody to know.
I got a laugh out of your conclusion that pad height is a deeply held secret. I assure you it is not. I will try to do a video on that tomorrow or the next day.
I just got done editing the video and then I realized that I did it the wrong way! Oops! I will have to redo a few of the clips. I hope to get the video published on Monday.
I guess my "conspiracy theory" (Lol) on the secrecy of setting key heights is gaining momentum since you say there is a video in the making yet one has not been produced to date. I may have to call my CIA guy to see what he can find. I know you are probably a very busy person with your chosen profession. I am just having some fun with this. A great day to you sir.
Yes, I am fine. I was planning on re-doing the video then things came up at the shop that had to be taken care of. Also, I have 8 kids and my wife is expecting #9 and she needs a lot of help. Anyway, I will try to get the video done soon, but no promises. I am almost done digging out of the stuff that I had to do at the shop and I am finally getting back to my youtube channel that I have neglected for several days. .
Getting ready to have an old Yamaha from 1976 overhauled and I hope someone with your knowledge and dedication is working on it. 👍👍
Thank you for this video. I am not a repair tech, and I didn't know what order to start regulation. Your video helped me a lot!
Bonjour et merci beaucoup pour vos conseils.
Super 👌
Great job Art! You explain the process very well. Many techs are great at repairing, but they can't explain and teach very well at all. You are awesome!
Thanks very sir
I really appreciate your lesson 🎉😊
Wow, what a time-consuming process. Patience is definitely the order of the day.
Art I would like to see you do everything. I want to learn how to do this. Excellent job.
Thank you so much, my friend! You saved me and my psyche! It's only thanks to you and your video that I was able to align those crazy keys in my right hand! Thanks again!
Glad I could help!
Thank you soo much. This instruction is pure gold!
Hello there. Just wanted to say . You have a great channel. I'm not afraid to tackle any problem I have with my instruments. Awesome tutorials. Steve from mass.
Thank you!
Brilliant video, thank you👍
Great video! Thanks for sharing!
thank you so much. It was very helpful
I wish there were more tutorials on the left hand stack adjustment. It seems to be a much more frequent issue in my case.
Yeah the left hand stack is a little more complicated as it has more interconnected keys that need to close in groups simultaneously
Great video! Thank you
My alto sax's F key needs to be adjusted but it does not have the adjustment screws on the back like your does at 6:13. How do I adjust the key with this kind of sax?
Master, this sax has screws, but when they do not, it is more difficult to adjust.
This video is so helpful and informative. I have a request. I realize you are busy and have a new baby so this would just be for future topic idea. But there are so many "cheap" saxophones being bought for new players or people on tight budgets. It seems that a common issue is lower keys not closing. Do you encounter this at your shop? Most of your videos are on quality equipment but how can you make a cheaper sax play better? Also. Many new ones come in colors and lacquer metallic. What can you clean these with? Asking as I bought my niece one of these cheap amazon saxes and want to make it as good as I can for her.
Is there a video for the upper stack?
My saxophone has a problem with the G key to below key can't play low note even I didn't touch the octave key. It's high note at all time. Do you know where is the problem source..thnks
Here are some links to some videos that may help.
"Saxophone Octave Problems That Are Easy To Repair:
//czcams.com/video/RUiwoNulYkw/video.html
"Adjusting and Understanding the Sax Octave Mechanism"
czcams.com/video/JxpD8_Hq97M/video.html
I hope this helps.
Art
I see a tool called saxophone key high gauge for alto and tenor.... maybe we can know the high of the tool???
Hi, I have a Conn New Wonder Series II Alto Sax. Some key rods are worn(no more than 1mm) What are the options for them to be repaired? Thanks!
6:08 My sax doesn't have those screws.
Hi! I own a Selmer Paris Super Action 80´s Series II alto sax. I can´t find the screws to regulate the low D, E and F in relation to the F#. Can you help me?
You can go to your local repair shop. They should be able to order them from Allie Supply for you. If that does not work, I may be able to send you some.
I realize I’m replying to an old comment, but the Selmer saxes I’ve played don’t have adjustment screws for the mechanism that Art is seen regulating at 5:10 in this video. Instead you have to fuss with the thickness of the felt or cork between those arms and the bar that closes the F#. I confess I’m a player and not a technician though!
what is the green thing in the b flat key Sir? Is that a bumper? Does it affect the tone?
That is a piece of felt. It keeps the key from hitting metal-on-metal on the keyguard.
why bend the key instead of just adjusting the adjustment material and screws?
Either will work. Bending the foot of the key can work better in some cases, but not in others. When the keys are out of adjustment, but in regulation, bending the key will keep it in regulation while putting it into adjustment. if you turn a screw, it will put it into adjustment and take it out of regulation.
@@TheBrassandWoodwindShop thanks for the reply!
I came to this video to maybe find out how to use the pad height tool and you just show one and then say it won't be needed because you will already know how far open the pads should be if you've done a few adjustments before. Well, I haven't done any before, so you were no help at all in actually using the tool. Your video made no claims to show how to use this tool. Can you tell me where I might find information that will tell exactly how to use the gauge tool and which holes get which height? I am finding it very hard to find any info on proper use for this tool. Which pads get what height must be a secret no one wants anybody to know.
I got a laugh out of your conclusion that pad height is a deeply held secret. I assure you it is not. I will try to do a video on that tomorrow or the next day.
I just got done editing the video and then I realized that I did it the wrong way! Oops! I will have to redo a few of the clips. I hope to get the video published on Monday.
I guess my "conspiracy theory" (Lol) on the secrecy of setting key heights is gaining momentum since you say there is a video in the making yet one has not been produced to date. I may have to call my CIA guy to see what he can find. I know you are probably a very busy person with your chosen profession. I am just having some fun with this. A great day to you sir.
Yes, I am fine. I was planning on re-doing the video then things came up at the shop that had to be taken care of. Also, I have 8 kids and my wife is expecting #9 and she needs a lot of help. Anyway, I will try to get the video done soon, but no promises. I am almost done digging out of the stuff that I had to do at the shop and I am finally getting back to my youtube channel that I have neglected for several days. .
@@willswanderings6912 Good afternoon master, did you get any answers about opening the keys?