Vevor Melting Furnace -12kg - Setup and Tips - Complete Walkthrough
Vložit
- čas přidán 13. 04. 2024
- Affiliate Link: s.vevor.com/bfQXP3
Save with 5% discount code VV2324
Vevor Propane Melting Furnace - Complete setup, tips, and walkthrough on how to use this 12kg furnace. The Vevor 12kg propane melting furnace is not only a furnace. It can be turned on it's side and used as a forge as well. One of the best furnaces I've seen yet. Not only is this Vevor furnace a combo unit, but it comes with an unbeatable price.
I hope you enjoyed today's video. Please give it a Like, Comment, and Subscribe.
**************************************
If you would like to reach me, these are some options:
My Instagram: @HeinrichsMade
My Email: heinrichsMade@gmail.com
My Rumble: rumble.com/c/c-1661682
My Facebook: www. heinrichsmade
Subscribe for more metal melting videos:
czcams.com/users/HeinrichsMa...
***Disclaimer***
This video is for entertainment purposes only. Melting metal should be done by a qualified or experienced individual that has knowledge on this. Do not try to replicate this at home unless you know what you are doing. Molten metal is extremely dangerous make sure all proper PPE "Personal Protective Equipment" is worn when melting metal.
#heinrichsmade #metalwork #aluminum #copper #youtube #silver #metal #metals #crucible #furnace #foundry #bigstackd #cool #amazing #melt #metalcasting #meltingcopper - Jak na to + styl
Awesome video! This vevor furnace seems really good.
Thank you 👍
I Am getting one. To Melt 🫠 my copper, brass, aluminum, and so on. I have looked for a video on melting brass without flux can't find anything so u may give it a shot with and without. But thanks for the walkthrough 😃 now i know what to look forward to.
That's great! Definitely get new crucible tongs or make your own like I have in the video. I have a few videos coming out in the next few weeks where I melted brass. With a smaller furnace. I didn't use any flux.
"Because this is a brand new crucible, I'm going to heat it up very slowly"... Immediately proceeds to heats it up very fast.
FYI a slow 'proper heat' of a new crucible (according to e.g. manufacturers of "Mammut crucibles") should take about 2 hours to slowly ramp up to reach 200°C. Then it will have been safely dried and you can go nuts. A kiln or an oven is better suited for this than a gas furnace.
Yeah I only had the burner half open. It definitely heated up much faster than I would have liked. I usually put it in my house hold oven for 1hr. It worked out well in the video though, no issues. I've already used it a number of times since.
Nice. I have put some thought into getting a 2 burner. Wonder what the difference in gas use is compared to how fast everything melts
Well that I don't know, but You really only need 2 burners for forging. As you can see in the video once, I heated it up I turned off the second burner.
for the price, may have to pick one up down the road, but not sure I need yet another one around, but would be nice having a light one vs the 5000 pound one I have now :)
Yeah it's SUPER CHEAP!!! It's huge and light weight. It definitely beats a 5000 pound furnace 😂
nice setup. big enough for me even lol
Yeah buddy! I'll be using this for most of my videos now. I can pour more than 1 thing. Yeah I'd say it's as big as yours. It looks like it could fit a larger crucible as well.
The forge setting honestly seemed rather unimpressive, I expected better than that dull red.
If I left it in there longer I know it would have gotten there. Also, don't forget it is a large diameter furnace. Maybe bringing the steel higher and closer to the foam would heat it quicker.
how much LP gas did you burn to melt that.
Not much... I don't measure how much I use. I just know that 20lbs of LP gas lasted me over a month using it.
@@HeinrichsMade good to know. the cost of propane has been the hold up with me getting or building a melting furnace. i would use a waste oil burner if i wasnt in a residential area.
@@DontCallMeGarage how much does LP cost? A 20lb tank costs me $22 to fill
@@HeinrichsMade i havent bought propane in forever and a day, i fill my tanks at work for free. and my grill is hooked up to the NG off my house... but since washington has one of the highest gas taxes in the country i'm pretty sure its not cheap.
@@DontCallMeGarage oh that's sweet! If you fill your tanks up for free at work get melting 💥💥💥💥 haha
Can you send a link for Ingot mold? You used thank you for making this video ! Received my vevor 2 days ago…where did you buy it ? Thanks 🙏
That's great you got your furnace! I'm sure you can't wait to use it. I actually purchased the ingot mold a year or so ago. I don't remember where I got it. However you can just type in graphite ingot mold on amazon or google and find one. They come in different shapes and sizes. Also check out some of my other videos. I do lost foam casting and that is super easy.