DIY RV Step Motor Replacement | Full Time RV

Sdílet
Vložit
  • čas přidán 6. 08. 2019
  • DIY RV Step Motor Replacement | Full Time RV (EP 36)
    ℹ️ About this episode:
    In this detailed tutorial, LivinRvision takes you through the step-by-step process of DIY replacing an RV Step Motor. Upon arriving at their latest campground, they faced an unexpected issue: the power steps began slipping and failed to fully extend when the door was opened. Curious about how they tackled this challenge? Watch the video to discover their solution and learn essential maintenance tips for your RV steps!
    ▶︎ Our Favorite RV items can all be found at ➡️ amzn.to/33s9Rae
    ▶︎ 👕👚T-SHIRTS!! livinrvision-shop.fourthwall.... THEN, click on - LRV Swag
    Many of you have asked how you can help support our channel. We do not expect you to, which is why we do not have a Patreon account or use CZcams's similar system. But if you would like to buy Michelle a piece of pie 🤓🥧 or Brian a burger 😊🍔, you may do so here. 👉🏻 Donate with PayPal & Thank You for your Support to our channel (and Michelle’s addiction to pie! 🥧 🤓) www.paypal.me/LivinRVision We hope you continue to enjoy our videos!
    Join the Visionary Gang email list! www.livinrvision.com/contact/
    SUBSCRIBE HERE 👉🏻 czcams.com/users/LivinRVisio...
    🙌 HELPFUL LRV (LivinRVision) PARTNERS
    These are brands we enjoy using that you might too.
    ▶︎ Thousand Trails: www.livinrvision.com/resources/ SAVE $! CONTACT KIM here
    ▶︎ TechnoRV: technorv.com?Click=11818 RV recommended products.
    ▶︎ RV Life Pro: Click 👉🏻 HERE for 25% OFF your first year for NEW Subscribers of RV Life Pro!
    ▶︎ GasStop (Propane Safety): diversifiedpower.com Coupon Code: LivinRVision
    ▶︎Solo Stove: solostove.com/?rfsn=4549819.0... Tired of campfire smoke following you like a magnet?
    ▶︎Beddy’s: bit.ly/LivinRVision 15% off coupon code- LIVINRVISION
    🎵MUSIC We Use🎵
    Epidemic Sound: www.epidemicsound.com/referra...
    AFFILIATE LINK DISCLOSURE:
    Some of the links on this page are affiliate links. If you choose to make a purchase using our links, we will earn a commission. This commission comes at no additional cost to you, but helps us keep providing the content we love to share. We recommend these products because we have found them to be helpful. Every product we recommend, we use ourselves.
    We are a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases which is designed to provide a means for us to earn a small commission from purchases you make using our link. ALL prices are the same as if you didn’t use our link, so there is NO ADDITIONAL COST to you. 👉🏻 www.amazon.com/shop/influence...
    ⬇️ NON-AFFILIATE LINKS ⬇️
    Reserve America (Army Corps of Engineers Campground): www.reserveamerica.com/
    America The Beautiful Pass: (National Parks & Federal Recreational Lands Annual Pass)
    store.usgs.gov/pass
    LivinRVision, All Rights Reserved
    This channel is for entertainment purposes only. We are not RV or travel experts and we only share our opinions and what has and has not worked for us during our past experience(s). You should always do your own research before making any purchase(s) or taking any action.
    Limit of Liability/Disclaimer of Warranty: While all persons associated directly or indirectly with this site and video use their best efforts in preparing the content, there is no express or implied representations or warranty with respect to the accuracy or completeness of the content of the videos, including any content, links or resources shared, including those by third parties. Furthermore, all parties specifically disclaim any and all express or implied warranties of merchantability or fitness for a particular purpose.
    #rvlifefulltime #fulltimervlife #rvlife #rvpark #rvliving #livinrvision

Komentáře • 57

  • @JonathanGuido-pz9me

    Good instructions really helped. After struggling with installation i ran a tap thru the holes in the plate to clean the rust and debris then assembled easily. Thanks

  • @adammore2653

    Good video!

  • @markdavis8888

    Plastic gears? Squeezing every dime out of rvers.

  • @user-jp8ib4lk6t

    Yep. Got the part for 40$ followed the video and voila! Steps are fixed now. Figured I saved between $300 and $800 so I've been told by rv mechanics. Those rv repair shops charge a minimum of $60 an hr! Not an easy go of it though. Just stick with it! Thanks!😂😂

  • @davideckberg5829
    @davideckberg5829 Před rokem +1

    Thanks it made it a easy task 🏆🏴‍☠️🏴‍☠️

  • @bahemi5287
    @bahemi5287 Před rokem +1

    Thanks

  • @robertjennings5863
    @robertjennings5863 Před rokem +1

    Is the gear on the motor free spinning? It spins when the door opens and closes but will not keep the steps in place.

  • @bonniefourakre3900
    @bonniefourakre3900 Před rokem +1

    I have 3 bolts and 5 spacer's were do the other 2 spacers go?

  • @anthonyb2334
    @anthonyb2334 Před rokem +2

    I had my step motor go out last week. I checked my usual subscribed channels and your video was the easiest and closest to my application. Very helpful to me.

  • @michaelwilson7087
    @michaelwilson7087 Před rokem +2

    Buddy...I have the exact step and was SO grateful for your video as I prepared to change out the motor. I figured since it took you 15 minutes it would take me an hour 😉 Well, it took me three hours...Geezzz! Those spacers were a bugger. Anyhoo, replaced the motor and it's a no go. Waiting for the controller to arrive so I can spend another afternoon under the coach. Thanks !

  • @paulwhitaker2128
    @paulwhitaker2128 Před rokem +1

    I’ll be changing my step motor in the next few days. Your video builds my confidence that it should be an easy job. That’s always dangerous optimism. We’re full time and have been on the road for two months. It will be nice to not have to use a stool with a rope attached in the center of the step. Thanks for the video.

  • @miloslavbritovic3576
    @miloslavbritovic3576 Před 2 lety +2

    How long did the process take?

  • @JohnWalker-2684
    @JohnWalker-2684 Před 2 lety +1

    I know you did this a while back but wanted to ask you if you had to drill out the holes on the new motor? Also am I correct that one spacer has to go on top of the plate and the second spacer on top of the second plate? I bought one motor which cost $174.00 and would have to drill out the holes to 1/4 so not wanted to do that, I ordered a cheaper motor at $58.00 to see if that would would fit without drilling out the holes.

  • @richardryer3578
    @richardryer3578 Před 2 lety +1

    Nice video my step works great thank you

  • @hexrays
    @hexrays Před 2 lety

    Thanks! My steps work smoothly but will only work in warm weather. I initially ordered a new controller which turned out not to be the issue, so sending it back. Ordered a new motor on Amazon today. They are even cheaper now! ($49.00) Hoping this solves my issue. Not sure what else could be causing the issue except the motor, considering its' finicky desire to not be cold. 🥶😁

  • @cgpimp1
    @cgpimp1 Před 3 lety +1

    Some people just have to criticize someone for something..great video straight and to the point

  • @cgpimp1
    @cgpimp1 Před 3 lety +1

    Need help: one of my motor bolts fell out so I bolted it back on now the steps extend and retract but when its extends fully the gears makes a grinding noise for about 3 seconds then the motor stop

  • @georgesmith651
    @georgesmith651 Před 3 lety +1

    Hi Brian, great video. My entry steps have a problem. When the switch or door is activated they either go part way in or part way out and stop and the motor has a loud humming noise. Could this be a bad motor, thx again.

  • @stevelong6213
    @stevelong6213 Před 3 lety +3

    FYI Step location doesn't matter. The controller just will decide when to stop either direction.

  • @sueallen9364
    @sueallen9364 Před 3 lety +2

    Hi! Thanks so much for the easy to follow instructions on replacing the step motor. As advised by you (and by Lippert) we ordered our part from Amazon (didn't get quite as good a deal as you did, but was glad to get it) and it arrived today (Sunday). Husband and I are thinking, 3 bolts, plug it in, should be working in 20-30 minutes, including gathering the needed tools. We had already removed our old part. When we got ready to put the bolts through the holes of the new part, they absolutely would not go in. Comparing the holes of the old part (which the bolts just slid through) to the new one, it was obvious the holes in the new part were smaller. We considered drilling them out but don't know that we may do more damage and we don't want to pay $150.00 plus for another new part. I have a call in to a friend that works on rv's for ideas but haven't heard back from him and tomorrow (Monday) I will call Lippert guy again and ask him what we should do. Since we are in Elkhart right now, maybe they will make the part good. In the meantime, do you have any suggestions. Fyi...this is how everything husband and I try to do goes...we always have some unusual issue.