How to stone veneer a wall
Vložit
- čas přidán 26. 10. 2022
- In this video I explain how I stone veneer a wall. I show all the tools you need to get the job done, and how I mix the mortar. Then I show how I lay the stones on the wall, and clean out the joints. Next I teach you how I grout and point the joints after laying all the stone. Thanks for watching!
Please subscribe to my channel! -
/ @masonthemason6412
Want to learn more about laying stone? Click on the links below to learn more!
How to lay flagstone-
• How to lay a flagstone...
• How to Lay Flagstone
The process of a flagstone job-
• Pennsylvania Stone Wal...
• Huge Flagstone Patio p...
How to mix mortar to lay stone-
• How to Mix Mortar To L...
How to stone veneer a wall-
• How To Stone Veneer A ...
• How to stone veneer a ...
How to grout and point a stone wall-
• How To Grout In A Ston...
How to scratch coat a wall for stone veneer-
• How to Scratch Coat Wa...
• How to use a .22 cal n...
• How to scratch coat a ...
Timelapse stone work-
• Stone veneer wall Time...
Showcasing stone work-
• Flagstone Pool Deck
• Stone work on my cousi...
like I've said b4 u r a true mason, its pretty impressive esp for being a young buck (no offense)
You make it look so simple!
I try haha
Nice work.
Great video Mason. I noticed that you used different bonding agents for the Mortar and the stone. Is this be design or is there no issue using the same bonding agent for the mortar and the stone?
Looks real good.
Thank you!
Very helpful videos. First time doing masonry work and building an outdoor fireplace.
Are you adding any color to the mortar? I don’t want everything to look like gray concrete in between the stone. Thanks!
Great video ! do you think a person can do the same with block , and do what your doing to make a little retain wall for a garden?
I think so
Do you find dry stack to be easier or more difficult than a grouted look?
Grout bag you'll be there forever like that. Then use a wire brush once it sets up and you can push it in with a slicker if you want to
Mason, I’m just curious, I come from commercial FRAMING mainly. I just started with a new company doing residential and commercial renovation and remodel. I’m doing stone columns currently. I’ve NEVER done any masonry before. Do you have any tips for “speeding up” I feel I’m just goin super slow? But also feel I’m doing what I see everyone else doing? Currently I’m covering 4 columns that are 16”x16” and 10’ tall. I’m averaging about half a column per 10 hour day…. Would you consider that slow? I’ve had comments that my work looks great, but I worry I’m slow? You definitely do great work and I’ve learned a bit from you in the last couple weeks!
Speed comes with time. It’s more important to do it properly.
You can start off fast but it will look like shit and you will make a lot of mistakes. Kinda like driving once you get good you can race. Or use some of that nailable shit.
Lol I never seen some else lay stone backward like I always turn sideways to the wall
Looks good, to the point,,especially for a young man, think this would work for a shower,?
Sometimes you put a screen on the wall first. Is this only for larger jobs.
You're referring to a "lath".
How much do you typically charge per square foot?
Depends on the job
12-32 a sq ft
He's an amateur, nothing really professional about his methods!! Plenty of other Pro's on CZcams you should be watching!! and learning from.
I did a job 35 years ago, not one stone has fallen off 👍📐🔨🧱
how did I know it was you!!!