How to Install Stone Veneer - Stone Master Molds Inc
Vložit
- čas přidán 16. 06. 2024
- Step by step video on how to install stone veneer. A simple and fast way to add more personality to your home. We have many different styles and color schemes, and we ship just about anywhere. Check out our unique stone mold creations at stonemastermolds.com/
www.ebay.com/str/stonemasterm... - Jak na to + styl
NICE JOB! Great finished look.
That looks so good! What a great job!
That was a good job as a long time Mason I know clean is key it was good and clean whoever he is laying them your laying them absolutely correct in my opinion whatever that matters but they look good
Very good video, good job...
good info, thanks...
Good job!!! But oo hard for me. Had a wonderful effect with EPS decoresin wall panels!!! Easy job good result
hi .thanks for video
i like to know what kind cement &sand in what ratio to use for instaling stone venieer & grout.
thanks
Thanks for sharing. Very insightful.
ça
.
+Otmane Falahi من قبل قوات الجيش والأمن العام بدبي
K tipo de mescla utiliza para pegar ña piedra
buenos videos
construccion
stone #1
If i am removing old flat brick looking .what is my prep to get smooth surface so i can apply this steps or do i apply anything beside smoothing and Vernee and setting grouting ?
1-562 225-3543
California
thanks
wonderful
this was good :) thanks for the info
Thanks
I also make flexible venner sheets of stone
Shouldn't the scratch coat lines run horizontal? those seem to be vertical.
And second of all when he's adding the stone someone finally used a real scratch but then did vertical scratch coat that doesn't hold as good
أحسنت جميل جدا رائع
That scratch coat looked rough and some of those stones looked they were missing to much mortar when applied.
If I cement stone directly on my brick exterior wall, will it not cause any moisture problems? Will I need some sort of rain system or moisture barrier?
No, just use a bonding agent (glue) on the brick prior to a scratch coat.
it can be applied directly to bricks or we have to do the scratch again
You will need to do the scratch coat again
bernardo ilustre a
Can this be applied directly onto stucco without first having to do the waterproofing and scratch coat?
The stucco is already water proof. And you can set it on the stucco it will still grip and stick good
yes it can. the scratch coat is the first step in a stucco job (after lathe and tar paper) and most stucco finishes are rough enough to work as their own scratch coat, or can easily be scored with an angle grinder to obtain the same effect as lathe/scratch.
If the stucco is painted with stucco paint will it bond
if it's painted you need to re-cover with a bonding agent.....Weldcrete
Guys I have been scouring the internet for
This answer! Many THANKs! Now off to Home Depot!
I wonder if you could do this over brick?
Yes you can power wash the brick first for optimal bonding
I have brick outside, do I take the brick out first or can it be installed over it?
It can be installed over brick
Rae Young is it as sturdy as brick... my house is getting rebricked due to tornado.. i want to go with this instead of brick. will it hold up like brick.. thanks
Christopher Lane Yes it is just as sturdy. Just make sure the installation is done correctly. Using a grout between the stone will ensure its sturdiness.
Thanks
It is difficult to install the stone veneer without the stones coming loose during installation.
JN 2013 Make sure the mortar mix ratios are correct. You might be using too much or too little water and/or sand.
Get the man a proper scratch coat tool
Que mescla usa para pegar la piedra
Juan Mora tipo S o tipo N
Type S
It doesn't take a "Stonemason" to fit this stuff just good common sense,,,,a good "Tyler" would suffice mined you watch those whom claim the hourly rate,,,,and above""""working this out not by meter but by workmanship and one wanting to retain his or her credibilty,,,,the end eqasion is simple cost of goods the cost of labour with a pat on the back for a job well done.
Lath should feel rough when going UP not down.
no, the lathe should feel rough when you run your hand down it. that gives the mortar more bite and supports the heavy stone better. if you run your lathe the opposite way it makes it much easier to trowel the mortar onto the wall (as most people trowel in an upward direction) but gives less support for the stones. smooth side up is generally used for stucco where there is no real load for the mortar to bear, to make troweling go faster.
Smokey420Greenleaf Rough UP, smooth DOWN.
good video but someone buy that poor Mexican a proper scarifier or at least a tile trowel. my hands were bleeding just watching him use that piece of lathe to finish the scratch coat.
Glad he gave me idea use it. Save me $$.. Dummy
@@megandaniels3875
And you too could be in the running for the worst scratch coat in history
3:55 he needs to use an actual motor rake.
Lath should feel rough when moving your hand up not down per the Minnesota Lath and Plaster Bureau. The dimples of the lath should be on the face of the weather resistant barrier to create a pocket for the lath as well. Don’t watch CZcams for educational instruction. Read published articles by NAHB and Tradesman publications. These experts have scientific data to back up their methods not, “this is how I have always done it” type tradesman.
He is a terrible tradesman. Badly scratched. Starts to lay the stone half way up the wall. Raking out the grout with the handle of his trowel. Some of the vertical joints were tight and had no grout joints
buy a scarifier
Looks like he forgot his scratch tool for the video, rookie mason
even with sped up video this guy is slow!
wire brush? wtf? y'all r doing to much work