Video není dostupné.
Omlouváme se.
Propane Forge Build - Using a Gas Bottle and a Kit
Vložit
- čas přidán 4. 09. 2018
- My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
I've always wanted to build a decent forge and I finally got around to it. There's going to be some fun times ahead, learning and making all sorts of cool things!
The kit worked out awesome! It was great having everything in the kit made to fit a 9kg gas bottle. There wasn't any guess work or ordering more material than what was needed and it also has the same burner that Alec Steele uses (I believe). It's a nice bit of kit!
I got the kit from GameCo Artisan Supplies. They were also very helpful in guiding me through the process of the build, answering questions along the way.
www.artisansupplies.com.au/pr...
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
JUST TO CLARIFY BECAUSE I'M GETTING SO MANY COMMENTS ABOUT IT.
DO NOT GRIND A GAS BOTTLE THAT HAS HAD GAS IN IT.
I PUT A CAPTION IN THE VIDEO STATING THIS WAS A NEW BOTTLE (NEVER HAD GAS IN) AND I HONESTLY CAN'T BELIEVE (OR DON'T WANT TO BELIEVE) THERE ARE PEOPLE STUPID ENOUGH TO CUT OPEN A USED GAS BOTTLE (WITHOUT PROPER STEPS)!
I've always wanted to build a decent forge and I finally got around to it. There's going to be some fun times ahead, learning and making all sorts of cool things!
The kit worked out awesome! It was great having everything in the kit made to fit a 9kg gas bottle. There wasn't any guess work or ordering more material than what was needed and it also has the same burner that Alec Steele uses (I believe). It's a nice bit of kit!
I got the kit from GameCo Artisan Supplies. They were also very helpful in guiding me through the process of the build, answering questions along the way.
www.artisansupplies.com.au/product/large-gas-forge-refractory-burner-kit/?c=22783a5940ef
Pask Makes hey Pask the Making Time Podcast is having a “no forge” forging challenge. The idea is to get people interested in the black arts. I mean Blacksmithing with just the things most people have available. Building a forge is allowed. 👊🏼
Alec's a top bloke isnt he, but check out Sam Fowler, his old mate, he has a variety of kits/parts, fully assembled forges etc for sale on forgeburners.com
This is a great video, start to finish. Thank you for taking the time to make, edit, and post all your videos.
As for "stupid people", my brother is a firefighter. He responded to a garage fire where, get this, the guys working on a car used a cigarette lighter to check the fuel level in the gas tank. Hence why my brother says, nobody calls the fire department for doing something smart.
Why didn't you add how long it will smell like the strongest gas smell there will ever SMELL!
And to add one more thing.
I've made a pot belly stove out of propane tank. But used a 100 gallon tank and cut it down. The wall thickness is alot thicker.
It seems to me if some one would spend all the time editing you would construct something that would last. Every time you heat up and cool down you lose a little material in your cylinder.
But good job with following whatever directions you were following.
My grandfather was a lead blacksmith for a Coal Company in Pennsylvania. I wish I could have met him I wish I could have learned some of his trade but I always enjoy a true Craftsman like yourself. How can you possibly see and envision a project so far ahead. You're a true fabricator and a true artist.
I’ve been a fan of your channel for a while now and just finished watching 4-5 of your videos. I must say that you have a way of making your builds look like anyone can do it. No stress, pressure or overwhelming feelings at all!!! Thank you for sharing your builds and inspiring people the way you do!!
Hope all is well now with you and community down under.!!?!!👍🏻👍🏻
Thank you very much for this video. I am the metal shop co-ordinator for the Moss Vale Men's Shed Inc. and we have just purchased the kit to make a forge. This video is going to make our job a whole lot easier. Also I am enjoying your knife making vids too. Keep up the good work; and again, many thanks for sharing what you do!!!
Nice forge cobber. Love how you have gone with an Aussie designed torch. Beets my brick and charcoal in the ground. Can't wait to see what you make
Thanks very much mate - glad you like it! :)
Pask... You never cease to amaze me. You have grown and offered so much over the past few years. I do appreciate you. Hey don't stray too far from woodworking eh!
Thanks Rick! I'll still be woodworking but I like all avenues of creativity! :)
This video is like the movie Patton for me. Every time it comes up on my feed...I have to watch it. That is just too cool
very elegant. love how it's not unnecessarily overbuilt and therefore not stupidly resource wasteful. other builders take note.
I agree he did an excellent job.
If you are using an old gas cylinder, after you remove the valve fill it with water, this will ensure no gas is left in the cylinder. Or you may find the next step of cutting, quite interesting . 😉
You'll be lucky if you find the next step of cutting at all. Most people who get blown up don't even have time to say "oh shit!", before they go see the big man upstairs.
So, you cut open a propane tank with a cutting torch w/out cleaning it first and you blew yourself up.
Q: Is it true that when you die you see a bright light?
A: if you are dumb enough to watch the explosion, Yes!
Q: did you see your life flash before your eyes?
A: No, but I did see pieces of the tank, my arms and the torch fly past my head!
Let Darwin work!
Dokładnie tak.
It will become what is known as an open furnace
I have no intention of ever making this, but WOW, excellent video! Beautifully made. Very slick.
Ah good ol slick Rick
I really dig the clever use of props and text placement for getting across build specs or techniques without using dialogue. I also really appreciate the thought you put into the”cinematography” of your camera work. Maker and film artist.
Oh, and the project is super cool too!
Thats a great way of drawing straight lines on a curved surface, thanks for sharing that.
Honestly, one of the nicest little, low budget forge builds I've seen so far. Glad you actually made an effort to contain that Kao Wool. Well done!
What a great project! I have it saved for future reference, and thank you for sharing all of your experience.
No worries Marcus! :)
Nice work, you have a lot of crazy projects that often are very time involved, but this one is relatively straight forward in comparison. When I was younger my roommate had a forge and I would melt beer cans in it while I was wasting time in the shop. Never forged anything then, but it is never too late.
I’m building this atm, this video is a fantastic instructional. I’d never even welded anything prior to getting a mig for Father’s Day a couple of months ago. You rock Pask!!!
Made my own forge around 5 years ago. So much fun. I really want to see you make a power hammer. I can't figure out an affordable way to make my own, and I know someone like you could figure it out.
That really would be a fun project - I'll get my thinking cap on! ;)
This guy has a power hammer build that seems easy enough and that probably costs very little (czcams.com/video/W_eiTSk7FrA/video.html). He sells the plans on his website, but honestly, if you have a good understanding of mechanical principles and movement, you could probably build it just by watching this or the many other videos of those who have built the same machine from those plans. I personally enjoy the challenge that comes with replicating from observation. Whilst it may not be an industrial quality machine, it's enough to get you started. I haven't built it yet, but it's on my list of things to do when I have time. Regards.
Davinci hammer
Great work matey👍🏻. I do a heap of melting in my furnace over on my channel but I’m looking at expanding into the blacksmithing stuff making knives and stuff so this gives me good ideas on Forge designs 👏🏻😁thanks mate great vid. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks very much mate! :)
I’m getting into forging and it amazes me how lost I’ve been without it, I hope to learn much more... “if you make another of this I’d like to buy one!”
Wow that was cool I too can’t wait to see what you’re going to build definitely gonna have to put this one on my bucket list
Hi Neil. I discovered your channel in the last month or so and have been binge-watching all your past videos! You are immensely talented and creative, and your channel has quickly become one of my favorites! I now view your content the same way I do Frank Howarth’s - with excited anticipation and watched without distraction. Well done sir - looking forward to many inspiring projects to come!
Thank you very much Steve - glad you're enjoying the videos! And thanks for the high praise!! :)
I watch him like Frank Howarth and This Old Tony
Indeed!
Nice
Great design and workmanship. Bravo..
I’ve watched this a few times now. Right at this point I’m in my shed just about to cut the holes in the forge. Came back here for references. Cheers for the video mate.
Love the craftsmanship! I do miss welding, one of these days get myself a little 110 machine for the garage.
There's nothing like making your own tools and equipment. Yes, it can be bought for less than the cost of making it but there's no pride in that. Good job!
That was an excellent build. I imagine that a forge like that will have many uses, and will serve you for years to come. I can't wait to see what you will create in the future using it!
Thanks Alex - I reckon it's going to be a fun addition to the workshop! :)
Nice build. Enjoyed it. Couldn't help but close my eye when you struck an arc. Lol.
Looks great. I trust myself to use an angle grinder. I do NOT trust myself to weld. Never done it.
Very very cool and instructive. Thanks for posting this!
I’ve been looking at one of these kits for a while, thanks for showing how it’s put together Neil.
No worries Carl - glad it was helpful! :)
sweet , now you can do that 20 part viking sword series :)
Thanks Joey! I haven't seen any of the viking sword one yet but I have been watching a lot of Alec Steele over the last few months! :)
Great build! I loved watching it. 👍
That's a great looking forge right there, I'm sure it'll serve you well! Can't wait to see what you've got cooking up in there, so to speak.
Thanks Matt - exciting times ahead! :)
One of the nicer forges ive seen built
Good job
It's one of the most beautiful things I've ever seen, I tell yuh hwhat.
Dang it Bobby! Propane and propane accessories.
Now that’s what I call a piggy forge!😉setting the tank down and shaping the fire brick with the front edge is an amazing idea!! Fine job Neil!👍😊
Thanks Jed! I'm not sure if that was over the top shaping the fire brick to the opening but it was easy enough so I thought why not! :)
You’re welcome and I definitely don’t think it was over the top. If nothing else it shows that we should all be thinking outside of the box😉😊
Thanks mate! :)
It’s my pleasure!👊
It's always great to observe superb craftsmanship.....thanks for your time and trouble !
That was a great forge build. I know what I’ll be rewatching when it comes time to make another forge.
Thanks very much! :)
Loved it! Thanks Neil. (Oh and I'm still yet to make my first forge, and now you've made two. Best I pull my finger out ;)
Yes mate, you'd better get on with it! ;) Thanks Scott! :)
If you want to make something easy and not too expensive theres an awesome video on it from essential craftsman. It only requires simple tools and can be built in a fery short amount of time. I built that forge and it works very well for the projects I use it for.
Awesome video. Thanks for uploading!
Absolutely awesome. Not only the project itself, but the video too.
Excellent build , nice eye for detail and it even looks good ! Inspires me to try something similar . Thanks .👍
Good video man love the quality of your work
Mate, top job, Aussie made, built to last, with a touch of humour "20mm ish" loved it, instant new sub.
Glad you enjoyed it mate! :)
Wow, awesome video! I'll definitepy have to get round go making one for myself
So cool! I want on!!
I did not know what he was doing until the end. Great work.
Excellent job mate.....I wish I had one as I am just getting started in knife making at 73 lol....Cheers
Thanks Mike - that's awesome! :)
its not how long it takes to get there thats important its getting there and having fun doing it thats most special!.
Great job, the forge looks great and I'm sure it will work fine. Thanks for the video it will help me build my forge.
awesome, must be nice to have such practical knowledge and skill where your contemporaries don't have a clue! Thanks!
man, that looks amazing! I just ordered a forge but now I wish I had made one like you!
Thanks very much - have fun with you're new forge! :)
Greetings from northern NSW! I see the knifemaking virus has spread up to Queensland now. People like you inspire the rest of us to 'make'. Thank you for the time and effort that you put into your videos matey. I'll patreon you if I survive my car rego...
Thanks very much Adrian! I reckon the Knifemaking bug is spreading all over, it's going to be fun learning something new! :)
Was inspired to look at your photography after seeing what a talented maker you are. My goodness, you have an eye for great shots. Some beautiful pictures of Scotland and England, really like the running river, such a well framed dynamic shot.
What a great video, look forward to going through your other stuff!!!!!!!!!!!!!!
Great to see someone who does this properly. If you add a thin layer of refractory in the walls and ceiling too it will be more durable and you're safer from cancerous fibers coming loose from the blanket.
What temperature did you reach in the end?
Thanks for the video!
Thanks Espen! I took it 850c for this test but I believe it should go to 1200c! :)
Yeah the rigidizer isn't intended to be in direct contact with the full flame
Double talking two faced
Greatful critisizer
offering the after fact assistance that will never matter to anyone
Happiest sad video ever
Said the perfectionist to the narcissist !
Fellow QLD'er 👍 great video mate. Probably the best DIY cost effective forge you can build.
Thanks very much mate! Go the Maroons! :)
That was brilliant! Taking two or three of those tanks you can create larger forges for larger projects. Just need more burners.
It turned it great. Awesome job!!
fantastic!!
Thanks for this! I'll be making 'something' in the next couple months. This got me thinking.......which can be dangerous,
Thanks again for another great video Neil! Always something to learn, helpful hints etc. I knew about kaowool, but I never knew about rigidiser. I appreciate seeing this even if I am not going to go out tomorrow & build a forge. But now when I finally do I'll have a bit more on my mind than before, it's like fine tuning I guess you might say! ("Grist for the mill")
I also like the way you scribed the lines on the tank, so very simple & very straight.
I might not have thought of that, but I'm sure however I approached it would still be straight & clean.
No worries Jason - glad it was helpful! :)
Can't believe how much your channel has grown 😮 congratulations mate.
Btw absolutely loved this video
"GASMATE"
What else would be written on an Australian gas bottle?
Marmite! Because we all know how explosive a topic that stuff is!
True that 😁 Aussie an proud 👍
I like it. It looks like a firey version of Marvin from "the Hitchhiker's guide to the Galaxy".
great job of keeping this video relatively short - for such a big time consuming project - you made everything very clear in an awesome way by using great camera angels and sweet and short notes where needed... great job on this one! like the style :)
Thank you! I try to keep my videos moving along and I went back to my older style for this one with plenty of captions! :)
Human ingenuity, where there is a will, there is a way. Bravo.
I had to watch this. That thumbnail was too compelling not to. I have a forge but heck. Maybe I need another. 😁. I really liked the way this one worked out.
Glad you liked it - Thanks! :)
Like that paint
All it needs now is a tail and some ears. I did have a good laugh during your DJ segment.
I couldn't do it Riaan, this ones a serious one! ;) Glad you liked that - just having a bit of fun! :)
Brilliant! Can't wait to see the genius makes come out of this beauty 👍
Thanks Bill! :)
Pleasure to watch you work!!
Another great video. Does this replace the piggy forge? : ) Loved the "nonsense" part. : )
Thanks mate! Yep Fergus is all but retired. Glad you liked the nonsense, just having a bit of fun! :)
@2:30 Thought I had entered a "This Old Tony" video.
esreverni ytilaer this old tony is great! I love his videos!
Amazing bit of work Pask! Now I know yet another project to add to my "never try making this" file............Can't wait to see what you put together using that forge though............... :)
Thanks Steve! If you've got any desire to forge something then you shouldn't discard making one, it was a pretty straightforward project,! :)
Man I’ve been interested in learning to work with metal! Welding, soldering, casting copper all that good stuff!
I already miss the Scrapwood Challenge song.
There'll be another before the end of the week! :)
There will be the heavy metal version - scrap metal challenge.
Scrap iron challenge, scrap iron challenge,
This metal’s cussed, it’s full of rust,
But some of the steel is real.
Queue screaming guitar riff, vocals in a death metal roar.
Gary Cooper Hahah👍😂
A grinder and paint makes me the welder I ain't
Nice to see the application of good safe techniques including the use of personal safety equipment. Well doe it will be good to see how well you can regulate the heat for knife making.
Thanks Robert! I believe that it's a well designed forge so hopefully it should work out well! I'm hoping to start my first knife later this week so I'll find out more then! :)
Wow I wish I had the confidence to do this!
Looks great.
Thank you for showing how you've made your forge.
Is there any danger in grinding a pressure vessel after you've "uncorked" it?
No worries Boris! There's no danger with a new bottle! Much easier than messing around flushing out a used bottle! :)
I would fill it once with water and drain it before I cut.
Ah. A new bottle is even safer...
it is amlost certain to explode, if you use an old tank and do not wash it out. Flush out old tanks with water. Fill them up 2 or 3 times before cutting them.
I don't know even know why, but I watched it 😂😂😂
Exceptional work & videos Pask, brilliant information.
Many many compliments!!! Special work for me !!! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Can you buy Liquid Rigidizer without a prescription? Asking for a friend.
🤣🤣🤣🤣
Seriously though, when are you installing the pig ears?
Haha - not this time! :)
Awwww, why not since you retired the other one?
Lol
I really enjoyed watching this build, great job it looks great!
Here I was thinking you were going to use painter's tape to make your lines on the cylinder and you come up with something simple but genius. Well done Pask!
Hank hill would have a heart attack watching this video
Actually, He'd probably admire this guy's ingenuity
Maybe he'll turn a propane tank into a charcoal barbeque? 🤔
@@curbotize , no
@@bigosesteban3122 let's be real here. Even Hank Hill likes charcoal over propane.
God damnit bobby
Loved this video! I would love to have a forge. Do you know where I could get a kit in the USA?
Thanks Billy! I'm not sure where but someone else may answer! :)
google it
Impressive work Pask.
I just came across your channel, viewed the 5$ axe restoration and now this, astonishing work, very inspiring.
I wish I was as half skilled as you are!
That's a well earned new sub for you Sir.
Thanks very much! :)
Красивый горн, и выглядит очень удобным.
Тигель, тигель. Ай лю, лю!
*I can Bake a pizza in that* 🍕
Absolutely fantastic video making ... Not to mention the craftsmanship!
Thanks Derek! :)
Hope one day to be able to eyeball and freehand with such precision. Nice work!
357 dollars for that kit?! Ill pass on that.
You could buy a small gas forge already made for that.
buy the stuff on your own and it will be around 150 euro
If it was just a bit larger...It would make one heck of a Pizza Oven. :)
It does look like a mini pizza oven - cooks quick too! ;)
That's some quality build, mate!
A nicely produced video about a nicely built project. Enjoyed watching that.
Looks like an igloo in the thumbnail.
$357 for the kit. Ouch.
You can buy a 2 burner already assembled for 100 less. Then pay the 70 for castable n be better off
@@matthewtomes9396 where?
There's a link in the description
Devils forge 2 burner
@@matthewtomes9396 thanks dude!
Nice one mate looks like a good solid forge 👍🏼👍🏼👍🏼
Dude that was awesome, I like that. Great job, 😁👍🍺