Malossi C ONE Project Piaggio (Scootertuners must watch this)
Vložit
- čas přidán 2. 03. 2015
- Mads Skiffard fik søndag d. 2/3-2015 samlet sin Malossi C-ONE motorblok af Morten Jensen.
De to venner har længe arbejdet sammen med mange forskellige, fede og nyskabende projekter.
Hos Danish Scooter Designs glæder vi os til at følge deres projekter i fremtiden ;)
Husk at følg Danish Scooter Designs på Facebook
czcams.com/video/NXqJAv19JvM/video.html
^^ The startup w. original raw sound
+Danish Scooter Designs
Vidste du at man kan få nitro boost til scooter?
Var godt bekendt med det ja :)
Danish Scooter Designs
Danish Scooter Designs
Helt enig med Nikolai, super fed video - og mér med Mads og Morten!
4:30 you should have lubed the piston with a little 2stroke oil when inserting it into the cylinder. When you first start it, it will scratch in there dry.....
the piston has already been run before look at the top of the piston it is black
@@maxlarsson9135 what engines do u built and how long do they last?
Non so perché, ma guardare questo video è quasi rilassante... Con la moda frenetica dei filmati in time lapse di quando si costruisce qualcosa che ci sono in giro oggi, questo è praticamente un'oasi.
czcams.com/video/5DYLRK6PrqY/video.html
Awesome detailing upgrade..!!
the red gasket maker aplication makes me wona die
lool
Yes me too
Too
i scrolled down to look for this comment :)
malossi block and polini cylinder makes me wona die tbh
FED video!
i just watched the Video cause the Tilte told me...
+DriNow And how did that make you feel :D ?
+Danish Scooter Designs poor
bet its not you're first :)
@DriNow hey alter wollte das gleiche schreiben :D
@J and S ScooterTuning :D
Love the music very jazzy!!
This reminds me days when I was in moped ages. :)
Edit: I'd want to buy a moped again.
Haha, glad you feel that way :)
very nice video ...
Allumage malossi mhr wow .😍😍
Damn, that’s satisfying to watch...
Smooooooooth jazz. Your listening to KWJZ
Love the work and the music thanks
The music made me wretch...
Why you no engine sound at the end ? 😞
BTW, good work. 👌👍😛
I never, ever thought I would hear music that would make me wish I was listening to rap instead.....
Magnifique spot
how many newton metres do you tighten the nut of the crankshaft on the variatro?
***** 30 newton meter, That is what Malossi says :)
🥰🥰🥰🥰🥰🥰👍
That bass!! Saweeet!!
Haha good humor :D
Song name ?
Er det nødvendigt at installere Racing ignition når man går fra 50cc til 70cc?
Apply an even bead of sealent to the face of the crankcase before assembly, i'm glad he is not building me an engine.
where i can find this bearing for the crankshaft ???
donde puedo encontrar estas cajas d bolas o ridamiento del siguenal
At malossi store :)
Where did you get that engine blocks and how much $$$. That is a brilliant design. RH DSD
In Denmark We get it in a shop
Speedline.dk
rarely i see vids like this.
Im tring to turn my icebear mojo 50cc trike into something that could handle the snow. Have old atv tires for the back 2 and a knobby tire for the front but 50cc gy6 ant going to cut it... Was thinking bbk go full build but money is thight so a 120-150cc swap can it be done cheaper? How much are yours
I like how everything is malossi setup but the shields are polini.
fed video, hvor hurtigt køre sådan en ???
Malossi C One Project but Polini Cylinder ? Whatever , but I have to say good work guys
Thanks for the reply mate,The plastic cover that goes over the cylinder head on a liquid cooled 172 malossi kit for gilera runner 125 engine
No problem :) ahm... could you maybe shoot me a link, that shows the part?
Der Titel hat mich angesprochen dafür ein Like
les joints spi se montent plutôt avec un jet ou un tube, ça marque pas et ça monte droit. :)
sans doute un gamin avec trop fric pour s'en soucier ;=
whats the carb diameter? its 28 vhst, or polini 32-34mm?
lækkert stempel
god dang that bass
That is one Beautiful Engine. I wish they sold them in the US. I can buy a US 50,000 Kawasaki H2- 300 Horsepower, just down the road ,but could not find this engine or parts anywhere in my America. RH DSD
DIOSpeedDemon they are in stock scooter swap shop
Nice work!, but music doesn't fit and why no engine sound in the end??
Hi there can I ask, what gasket sealant would you recommend using on the cylinder Base on a malossi 172 kit
Hi, im not sure if it is this you mean:
speedline.dk/scooter/pakninger/flydende-pakning-loctite-silicone-s-dll-55-465
Im right now working on a new edit on this video, hopefully with better music (Y) :D
i have no words
Siete grandi bravi
greeting wish, please I wanted to increase the power of my aerox yamaha 50cc, then I help cylinder exchange of 50cc to 80cc, start its march well but after a few days of use I have observed increase heat + burn of the butt joint
For the preparation of the aerox is that it is necessary to buy all the accessories kit or just modify cylinder and ambience also know exhaust kit;
how long is the life of this kit?
is it the same length of model standerd or not?
sincere thanks.
malossi -polini mix?
+Eusebio Gambuzza
Sometimes you gotta make do, with what you got :)
The owner of the bike has later bought and installed testa rossa (y)
But yeah, stage6 ignition and so on. still a mean machine thoug (y)
Posossi
Can I add the high performance parts to my factory 50cf yahama zuma 2012 and how much would it cost to do this
Would think so yeah :) but im not sure how the zuma is fitted from stock.. if that makes sense 🤷♂️
Your vorking is normal I doo and have a big practit in this vork .
whats that brown stuff being smeared on?
забивай сальники отвёрткой правильно! лучше держаться будут! и красный герметик для айса!
This is artistic.
How much would it cost to build a engine like this and how much??
3:15 should've used a deep socket now you got chips. cool build though
lol that polini cilinder on a malossi engine block those brands are competitors of each other on the circuit.
Yeah.. well, the guys who made this live in the real world.. where we mix sh*t up ;)
ففاغهعةقععغغععقي
no oil on the piston while inserting it to the cyllinder..... omfg i could feel the pistion scraping
Great 👍👍👍like by chanel goes duit tank you very much
yeah no i dont like the mixing of al the brand parts
Why do you used silicone red?
groovy man
wow! very very nice video.... thanks for share it. May you name the tools you have use it? (name and specs..)
czcams.com/video/5DYLRK6PrqY/video.html
герметик хороший
красненький, как любят колхозные мастера ) а вообще я не увидел снятие напряжения с коленвала, и его центровку относительно картера, хуйня кароче
That is satisfying
if you don't have the correct seal punch set use a big socket it install the crank seals instead of a hammer and screwdriver. good god!
what is the name of that song? the first one.
god the music got me into the mood
Atte Gröhn hahaha, yeah i know :) makes you wanna dance :)
I have been working on a second edit.. just cant seem to get it done :)
@@danishscooterdesigns5426 my god, bring me it already!
Atte Gröhn check this out while you wait :) czcams.com/video/Yik_Usy5Vrk/video.html
do you use electrical water pump?
mechanical are shit
How do you get those parts that clean?? I think the motor is used or not???
this is a new motor
super music
where can i buy that?
malossi eliminate the stock waterpump.kinda suck cuz if the battery is empty the pump will not work.how is the engine running?is it worth it to buy?
Doki Bubó
Then you make sure that you got juice on the battery ;) Or else sure, surtain death for piston+cylinder :) But yeah, very lovely product :)
Which zylinder is it?
Good work, but i see the squish is too low, the 94cc need 0,9mm not 0,77. When you set the ignition, try to use protractor, you can be more precision. Ciao
Dejlig video, godt filmet, godt klippet.
Flot udstødning, MEN de sidste 20 sekunder... HVOR BLEV lyden af?
Alt lyd blev skrottet af YT kort efter upload. Men da havde den bare fået så mange views, at jeg ikke kunne få mig selv til at slette den "bare" for at uploade en ny .
czcams.com/video/NXqJAv19JvM/video.html
^^ Her er den inkl. lyd.. dog kun den mikrofon der er indbygget i kameraet. håber det går :)
Mvh Kasper, DSD
Why no variator pulley fan?
Карл...красный герметик..
тоже заметил...
Дмитрий Трефи
Он у них не российский , причем тут цвет , у них совсем другое качество.
❤
Please PARTS LIST PLEASE !!!!!! Xxxx
Complimenti
La musica giustamente tranquilla per fare le cose con calma ...a momenti mi si chiudevano gli occhi.. ha ha ha...) scherzo...mi sbaglio o era la colonna sonora di qualche serie televisiva anni 80 ??? ero un appassionato tv anni 80... sai io non essendo piu' giovanotto...
Cool music would you be so kind to tell me the name of the song and the band who plays it ! Thanks for the video upload by the way ! enjoyed it
Zelidra hi :)
appreciate the good humor :) music is supplied by youtube :) new edition with better music is on the way
Må karburatoren gerne sidde så skævt? har nemlig en kammerats maskine hvor den sidder lige så skævt, der fortalte jeg ham at den skal sidde meget mere vandret, men der er vi uenige:D
Lige i dette tilfælde går det moj' fin :) vinklen ændres jo lidt når motoren monteres :)
The red gel is grease or silicone ???
Gasket ... if that makes sense :P forgive my sad english :P
👍
I'd like to here the engineers perspective on the swingarm belt pulley thingy. To me it makes no sense. Sort of why every bike on the road uses a chain save for a custom chopper??
how much grams of rollers? and springs?
Hvorfor samler han krumtaphuset med så lidt flydende pakning? Det er meget lidt syntes jeg?
Burde der ikke bruges lidt mere før, at det kan slutte ordenligt tæt? :)
+DujeDaren Det er langt fra nødvendigt og bruge ret meget da Motoren er rigtig pæn og plan på alle pak flader, så der skal kun lige en smule på så er det tæt :)
+DujeDaren forestil dig hvor meget flydende pakning der går i krumtapshuset når man bare fyrer godt på :)
Ja okay, tak for svaret ^^ :)
3:20. crankcase destroyed!
You right mate.
Not destroyed but good for one build and that's it hahaha these guys are a joke
should always use a loc-tite on the seals when installing them. and if you dont have a seal tool a deep socket works good. you can easily ruin a seal this way in the video. just sayin
Hvor stor karburator? og dysen? :)
+Chiny12ha dk Jeg ikke huske det, Men mener det var en 30mm karb, også en 150 ca :)
Tusind tak for svar :)
+Chiny12ha dk #MEREGAS :)
Men motoren er MEGET ombygget nu siden den video blev lavet :)
Holy crap.. That music really got to my last nerve!.. Now i know what torture is like!
Does this fit to Aprilia SR50 Street 2012?
+GoldenGlobe38 I believe Malossi has made an engine for Aerox ex. :)
Can we hear the engine? perhaps run it up to 11,000 rpm and leave it there for a couple of mins?
Also the water jacket?
I tried to google translate water jacket :P No luck... could you explain what you mean? :)
which crankshaft?
Kiesler crank shaft :)
Hola desde Argentina, es posible que me envien un motor asi para una Honda DIO? cual seria el precio? muchas gracias
What about the cooling? Electrif water pump?
TheMilenkata 11g .q
Не возмутимый мастер).
👍👍😎
brug aldrig flydende pakning ved cylinder... heller ej paa de rigtige pakninger...
Du gør bare hvad du synes Kim :) (y)
The is love...
Fuck yeah, bring it!
Why didn't you install the Oil pump?
there is not one. :)