Just a heads up…The reason that the tank ripped out at the two attachment bolts is because there is supposed to be a third bolt on the other side of the tank that is even with the spark plug. Without that third bolt attached, the tank will most likely fail again.
Thanks for this. I'm working on a greens roller. Very rusty. From the 90s...anyways had to put a new carb on. But the original cover doesn't fit. The fuel line is barely making it to the carb fuel port. So I guess ill be changing this line or adding another fuel filter to extend the line. And the seat is a total bit..to remove. So this will be fun
THANK YOU THIS HELPED, IM ABOUT YO CHANGE OUT MY TANK, ON MY Pressure washer GX200 engine, same tank ordered off Amazon.
Just a heads up…The reason that the tank ripped out at the two attachment bolts is because there is supposed to be a third bolt on the other side of the tank that is even with the spark plug. Without that third bolt attached, the tank will most likely fail again.
I was gonna say the same thing but I read the comments first.
Thanks for this. I'm working on a greens roller. Very rusty. From the 90s...anyways had to put a new carb on. But the original cover doesn't fit. The fuel line is barely making it to the carb fuel port. So I guess ill be changing this line or adding another fuel filter to extend the line. And the seat is a total bit..to remove. So this will be fun
If you have time what's the best way to get the rollers greased. All the bearings look great. This is a volunteer job.