Vielen Dank für die vielen positiven Kommentare! Euer Support ( Abo , Like , Teilen ) kostet nichts aber lässt den Kanal wachsen und motiviert für mehr Content
Thank you for your comment. The strips that you cut out have adhesive spots on the outside. These have beveled sides and a dashed line. The program pepakura shows which surface belongs to which one. Coat these outer strips with glue and glue under the other piece. czcams.com/video/_lQLLEAIxwc/video.html
@@mouathsw9343 Download the file. If you have Pepakura installed, open the file with Pepakura. Then tap Print in the top left and print out the sheets. Then it can go. I would start in the middle of the head. First the left or right side and then the other. To do this, click on the middle part in Pepakura (left side where the head can be seen). You will then be shown on the right which part is on which sheet. If you scroll to the right part of Pepakura, Pepakura will also show you (with a red line) which parts need to be connected. I hope this is of some help to you.
Vielen Dank für die vielen positiven Kommentare!
Euer Support ( Abo , Like , Teilen ) kostet nichts aber lässt den Kanal wachsen und motiviert für mehr Content
Que trabalho em ufaa😅
Can you make a clear video tutorial like how do I stick this piece to the other ?
Thank you for your comment. The strips that you cut out have adhesive spots on the outside. These have beveled sides and a dashed line. The program pepakura shows which surface belongs to which one. Coat these outer strips with glue and glue under the other piece. czcams.com/video/_lQLLEAIxwc/video.html
@@KALEL-1 Well, I don't understand how the program works. Can you send me the link for this bull head model? Thank you so much
@@mouathsw9343 pepakura.eu/bison-skull/
@@mouathsw9343 Download the file. If you have Pepakura installed, open the file with Pepakura. Then tap Print in the top left and print out the sheets. Then it can go. I would start in the middle of the head. First the left or right side and then the other. To do this, click on the middle part in Pepakura (left side where the head can be seen). You will then be shown on the right which part is on which sheet. If you scroll to the right part of Pepakura, Pepakura will also show you (with a red line) which parts need to be connected. I hope this is of some help to you.
@@KALEL-1Uhh , @@KALEL-1
Coole Idee @Kal el
echt, wa? ;-)
Hey, hast du das auf DIN A 3 gedruckt? Oder auf welcher Größe?
Nein auf DIN 4 und ich habe Papier genommen das etwas stärker ist , so ca. 160 Gramm
@@KALEL-1 dankeschön :)
Can you share the paper patterns pls?
www.papercraftsquare.com/bison-head-skull-free-papercraft-download.html