SCX24 Comp Build - Mazz Designs Carbon CHEAT CODE Chassis Installation & Review!!
Vložit
- čas přidán 5. 09. 2024
- In this video I revisit the Axial SCX24 comp build and install some Mazz Designs upgrades! I swap out the chassis for the carbon Cheat Code XL chassis and add some stainless steel adjustable links. This premium chassis kit provides incredible levels of customization and tuning. In addition, the high quality materials give the build a stunning appearance. If you are serious about performance, I highly recommend checking out this chassis kit.
For detailed instructional videos: mazz-designs.com/
Mazz Designs chassis: mazz-designs.c...
Mazz Designs links: mazz-designs.c...
Body: amzn.to/42aPysr
Motor (mod3 with mount): www.moforc.com...
ESC/RX: www.furitekusa...
Shocks: alnk.to/8tMqn97
Drive shaft: amzn.to/45zgrcu
Transmission: amzn.to/43xEgj4
Axles - billet super 8’s with CVD’s: littleguyracin...
Steering kncukles: littleguyracin...
Gears - stock size rear, 23% OD front: littleguyracin...
Servo: www.moforc.com...
Tires: www.powerhobby...
Wheels: amzn.to/3WBUDJa
Brass wheel rings: amzn.to/3ouKzp0
Rear link mount: alnk.to/aALw91O
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref... - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.c... - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracin... - code CAPE10
5% off any Flubberstufferz products: flubberstuffer... - code Capecrawlers5
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
First look at the upgrades: 2:00
Baseline performance tests: 5:28
Baseline course runs: 7:26
Linkage assembly and kit breakdown: 9:23
Installation key points: 11:09
Finished product: 16:12
Upgraded performance tests: 20:21
Upgraded course runs: 21:50
Final thoughts: 25:45
Timestamps
First look at the upgrades: 2:00
Baseline performance tests: 5:28
Baseline course runs: 7:26
Linkage assembly and kit breakdown: 9:23
Installation key points: 11:09
Finished product: 16:12
Upgraded performance tests: 20:21
Upgraded course runs: 21:50
Final thoughts: 25:45
Thank you Adam for the support and an amazing video! Very nice build! I always suggest a lizard pro and a galaxy 250 3s battery for electronic layout. Also a nice oil shock will bring the side hill up tremendously. If I were you I would try the hot racing 43mm oil or injora 39mm oil. These will also increase vertical as well. Also if you don’t have any overdrive in the rig I would do some front overdrive as well! Again thank you for all the support!
Mazz
Thanks Mazz!! I will try your suggestions and do some follow up content!
Just checked your site. Beautiful product! I really like your thinking with the angled link ends! I was gonna DIY my own links with similar bends as it just makes sense and hadn't seen any others do it.
??? Do you ship to Canada, and if so, can you ship via USPS? (The $ exchange adds 25% to the price for us. And then we get hit with import duties and tax on top of that, which really sucks.) Makes it hard to get the small designer products up here. But seems we get buggered a little less if stuff ships with USPS. Shipping with the Brown, Yellow or White companies will cause eye watering and soar knees.....
@@wingnutbert9685 thank you and yes I sure do ship usps to 🇨🇦
I have a carbon cheat code. It’s wild! Made such a difference and the customer service from Mazz is unbeatable!! Quality products for a good price and fast shipping. Can’t beat it!!
Mazz is amazing. The chassis has far exceeded my expectations and I solidly believe it's well worth the premium price tag.
Also I’m glad that front lower link got flipped around lol when you were handling the naked chassis and links I noticed one of them was backwards and it was driving me nuts lol but I also knew you’d spot it and flip it back around 😂👍🏻
Haha! Yes I caught that one towards the end of the install
Dude makes like a truck a day LOL
Just lyk he’s been having this car for a while now
🤘
@capecrawlers I have an idea for the body, you could cut out the body where the servos is and paint a snake on the body and then paint the servo horn red like a tongue for the snake. Sick bud as always keep it up 👍
This is a rad idea!
Hmmmm I really like it but also like to give mofo some love. I will definitely grab one for my third comp build.
When you think that the mofo chassis is less than half the price and how good it works, it’s pretty damn impressive
Put your electronics (that weigh almost nothing) 1 on each side, use extensions if you must i find i dont have to, then the battery which is still super light but much heavier than your esc and receiver, in the middle. Yeah it's towards the back (not ideal) but at least it's centered. This is far and away the best set up for my cheatcode.
Thanks for all your support my man! Great advice. However I like to run my lizard pro/micro receiver/external bec on left side slider and Galaxy 250 on right side and I personally leave tray empty! Keeps the left to right weight distribution as close as possible!
Love my Mazz carbon CheatCode 🤘🏼great chassis and a killer crawler you got there!
Thanks Dustin!
I literally just bought this chassis in titanium before I watched the vid. Glad I got to see your review.
Have fun building! I am loving it so far.
Hey bud just built my 1st cheat code and loving it I use lizard ultimate esc fits on slider perfect put receiver on other slider battery on back tray works perfect plenty of room spektrum 3s 300mah
Thanks Chris for all your support! Very good setup for batteries and esc!
Awesome so glad you finally built one. Love mine.
🤘🤘
I haven’t read all the comments but - would like to see more caster in the front end. Will help add steering, for sure. Didn’t like the looks of the set up off the bench though she drives nice!!
Good news is that there is tons of adjustability with this setup. I'm still dialing it in as we speak, but boy is it capable.
@@CapeCrawlers good way to stay positive Adam let's go get your mom and dad possibly named you after you know Adam and Eve just curious
Palm power batteries are tiny should fit perfectly on the sliders without hindering performance
Palm makes some great batteries. Also give the Galaxy batteries a try if you haven’t already!
Space your shocks out on top to get them staight up and down. They will articulate much better. Awesome build man. I have almost the same build except I have a different trans and motor
Thanks! I will give that a shot
Looks like you can take the top screws out of that esc tray and angle it down
Thank you for watching! However it is not intended to do so. The fitment of the tray won’t allow so. However it does allow you to get the tray as low as possible and can even get it to touch the back of the trans to keep everything low and forward. Or for rear facing it move back and up to get over brushed rear facing motors!
@@mazzdesigns6929 OK, cool I appreciate the response. Thanks 🤙
You've become the reason on the back order for the lgrp front axels haven't you❤
It's quite possible lol
This is one of my favorite rigs!
Thank you Alex! Means alot!
Mazz
Definitely still need a 3flow9 steering roller link and front diff skid!
I don't know if I commented on this one or not but man I had soft another great one brother God bless you man you're doing great I'm so proud of you and your channel like you have come so far and so fast like doubled your subscribers and less than about 6-7 months I just got the cheat code XL and then I tell you another one is my hard Park dementor v2 v- dub slammed and stretch to the Gladiator length it is a animal I cannot wait to build my cheat code though I almost got everything
Thank you, I appreciate that! Have fun with your build!
Adam I put a lizard ultimate on one slider and a palm bots 300mah 3s battery on the other side. Put my furitek receiver on the rear tray.
Yeah looking awesome, Yep I’m here watching
I got the sheaf code I do esx on the skids and the battery right in the middle to give me the balance and droop it needs
Hope you try out a Komp King for Akers Engineering. I just ordered one for my first comp build. Gonna be a journey……again…..😅
I think you could put the esc/rx on its side on the slider? Need to glue on a base,,, but it should fit on the slider I think?
Awesome build Adam 👍 great video 😊
Yeah that is awesome it crushed everything specially Hells gate love it
Looks cool! Nice performance.
What do you think of a bronco with the nylon portal axles mofo has? I'm going to try them out and see how I like them. especially since there super cheap!!!
Mazz sells a similar set of axles but his come with cvd inners. And he has brass upgrades available
@@cardboardcrawlersrc8805 thanks for letting me know! might grab those instead!
Dose running bress axles, diff covers, steering knuckles, and wheel weights make any good difference for a comp rig? I would assume it would help keep weight extremely low to the ground also increased grip. And with the brushless setup you are running with that new carbon fiber frame should be the ultimate crawling beast.
My cliffhanger is cut clear up into the hood to clear my servo! Comp rig! Cut it up!
Cool 😎...you should cut out a hole in the front and let that motor show all its glory 💪
Going downhill should be added to the test
Appreciate you sharing with us, One of these days I’ll put my mofo ugly chassis together
Best chassis in the game Brother
When are you gonna do the slayer chassis screw that cheat code a slayer is a way better performer
That’s next! Hoping to have the video up by Wednesday or the weekend at the latest
@@CapeCrawlers sounds good can’t wait
What’s the wheelbase on this build? I’m wanting to put this body on my trx4m if it’ll look okay. My wheelbase is about 6.4in
Speaking of chassis & the SCX24 Gladiator, I saw that Injora makes a chassis for the 24 Gladiator, I'm kinda thinking about doing. 🤔
Same here. I might try that on my build scx24 gladiator.
@@CapeCrawlers sweet
You know the xl chassis you used for this build was actually intended for the gladiator?
What’s your opinion on this chassis vs Texomarc slayer or new stk chassis?
Great video Adam
Regarding the C 10 and the deadbolt there doesn’t seem to be any videos showing whether or not the bodies are interchangeable and the wheel bases lineup so if you wanted to, you could make a video on them. Also, is it possible to get just the upgraded deadbolt rear links by themselves?
Yes, you can get just the deadbolt links.
Great stuff Adam!! Looking at that body, do you know how it would fit on the AX24 XC-1?
Thanks! The cliffhanger is a bit too wide I feel to fit on the AX
I saw Beadlock wheels on your show that wasn't injora. But I can't remember the video or the brand😂. recommendations thank you in advance
I love the Mofo RC wheels and the LGRP beadlocks. Both are fantastic.
are these a little more accessible now? every time ive tried to get it a year or so ago it would be sold out in minutes
The axles? They still sell out extremely fast. LGRP is doing better restocking but the demand is crazy by the looks of it
Would it run better if u had some spacers to bring out the shocks were they attach to the frame? So they are aligned with the axle mounts?
Possibly. I have some spacers I could try
beautiful
Approximately how much did the hole build cost?🎉
All in probably ~$700
Including transmitter?
Where do you get that set up table?
Does Chassis have to be Specific to Deadbolt or other links ? Or can most rails or chassis be used by deadbolt links an such ? i am new
Most are interchangeable. Deadbolt front links are really short which can cause some issues on aftermarket chassis’s. Just keep in mind that manipulating your wheelbase will impact which bodies will fit (without cutting fenders).
@@CapeCrawlers You are the BEST... THANK YOU. I like the weight up front idea on the deadbolt, But should i just get the Gladiator ? Others have said it is the one to get. I Love learning. SO Thank you for your time
Did you run your skid front or back?
How many scx24 do you have, holy moses😂. I need to go bigger and stickier with my tires on my rig. What are your favorite?
I have a lot 😬 my favorite tires are the LGRP swamp kings
Recommendation for tires?
The LGRP swamp kings are still my favorite tire. These Powerhobby trail warriors are great, but I can never find them (sold out constantly).
Hey Adam, I am planning to do the same build as you do you think it is worth it putting in a little more money for the Cheat Code chassis instead of the ugly af chassis.
After having some more time on the cheat code, I would say yes. The cheat code has really impressed me.
I’ve never been sold on the cheat code being better than the moforc ugly af chassis because of the battery placement on the ugly being towards the front seems like it would rule out anything else the cheat code has going for it.
Thanks for watching. The battery placement on the cheat codes are made to offset left to right weight on the chassis. Motors most always are offset to the left so all electronics on my personal builds are on left slider and battery on right. This gives a very balanced feel. Please reach out to me if you have any questions I’ll gladly jump on the phone with you. Again thank you for watching!
What tires are those
Power hobby trail warrior. They're awesome but hard to find!
Cmon dude you know how it goes. Bn in the game long enough to know battery on 1 skid esc and reciever on the other. Getvrid of that furitek avatar...g7p from flysky or the new radiolink. Only 2 real 4ws transmitters out there
I know you're right, but I was trying not to get rid of the Tegu lol But I can just swap it for another setup.
That gear mesh😬
What battery do you recommend for this chassis @mazzdesigns6929