DIY Small Welding Table | Simple Table build | The Improvement Channel
Vložit
- čas přidán 1. 04. 2022
- In this video, I will show you How to Build a small yet heavy-duty Welding Table.
I use 3/4 all thread to make the legs adjustable. I use some awesome casters I found on Amazon that are rated at 500 lbs. each!
WAYS TO SUPPORT THE CHANNEL:
Please SUBSCRIBE
Please hit the LIKE BUTTON
Please SHARE with a friend
SPECIAL PRODUCTS FOR THIS PROJECT:
Buy Casters Retractable Leveling Machine Casters - 4 Pack - 2,400 lbs Per Set
amzn.to/3uJP9ys
CUTTING, GRINDING TOOLS & CONSUMABLES
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
amzn.to/2xSXC9l
Evolution Power Tools 10BLADEST Steel Cutting Saw Blade, 10-Inch x 52-Tooth
amzn.to/2KrFAha
PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 7.5-Amp (PC750AG)
amzn.to/2VRdj8K
Freud DBD060045101F Metal Cut-Off Disc, 6 x 0.045 x 7/8-In. - Quantity 10
amzn.to/3aun967
Dewalt DW4910 5 Pack 3-Inch by 5/8-Inch-11 Knotted Cup Brush/Carbon Steel .020-Inch
amzn.to/34Xhh42
Neiko 11255A High-Density Jumbo Premium Zirconia Flap Disc | 4.5" x 7/8-Inch, 40 Grit, Flat Type #27-10 Pack
amzn.to/2RXTxr3
Neiko 11256A High-Density Jumbo Premium Zirconia Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
amzn.to/2S0JjGF
WELDING TOOLS & CONSUMABLES
Hobart - 500553 Handler 210 MVP MIG Welder
amzn.to/3buggmv
Hobart H305406-R22 10-Pound ER70S-6 Carbon-Steel Solid Welding Wire, 0.030-Inch
amzn.to/2VtXciQ
Lincoln Electric Weld Pak 115V Flux-cored Wire Welder For Light Hobby/Home Applications
amzn.to/3eRwYym
Osborn 54036 Plater's Fine Solid Wood Block Wire Scratch Brush with Long Curved Handle, Fine Brass Wire Bristle, 5-3/4" Length, 1-1/8" Width Brush, 13-1/4" Overall Length
amzn.to/2RZtMqy
4 Pieces of CMS Magnetics Magnetic Welding Magnets 50 LBS Holding Power Welding
amzn.to/34XiRTwMagnet | Welding Accessories | Magnetic Welding Holder (50 LB Welding Magnet)
4 Pieces of CMS Magnetics Magnetic Welding Holder 25 LBS Holding Power Welding Accessories (25 LB Welding Magnet)
amzn.to/2W2PFGP
TTC WMS1 4-3/8" x 3-3/4" Magnetic Welders Square (Pack of 3)
amzn.to/2SezWTZ
MISC TOOLS
Torin TRA8335 Black Steel 33" Ratcheting Off Road/Utility Farm Jack, 3 Ton (6,000 lb) Capacity
amzn.to/3eJrx4v
Empire Level 2990 Heavy-Duty Magnum Rafter Square 7-1/2-Inch Length
amzn.to/2S0o7jV
Empire Level E250M 12-Inch Heavy Duty Professional Combination Square With Etched Stainless Steel Blade, Metric Graduations and True Blue Vial
amzn.to/3bGgqrb
Klutch 5-Pc. Ball Peen Hammer Set
amzn.to/2RVqjZR
SHOP SETUP
(Pack of 12) 8ft LED Utility Shop Light Fixture, 72W 7200 Lumens 5000K Daylight White Tube Light, High Output, V Shape T8 Integrated 8 Foot Led Bulbs for Garage, Warehouse, Grocery, Clear Cover
amzn.to/2VNgI8N - Jak na to + styl
Love it
In the process of building the same size as a welding cart with welder, plasma and small cabinet for consumables. Have top and picking up steel tomorrow. The fun begins!
I hope it went well!!
I think the you should build another table with some drawers and tool hangers, and then donate the finished product to my garage... :) Thank you, a beginning welder
I like your style Bill, do you live in Texas?
Very project! Currently a bit outside my skills wheelhouse.
Thank you!
I'm in DFW! I really wanna build a table like this
You can go over to The Short Iron Store, they have 2 locations. They will be happy to take your materials list and cut everything for you. They will make the build a lot easier!
This video is going to the moon!🚀🌕
Big jump this morning.
Liked the video, researching what size welding table I want to fabricate.
I had the 4x8 table that I built in an earlier video in my 3 car garage it was a little too big. I have moved to a much larger shop and it fits perfectly.
Great video, I've watched a few dozen videos on making welding tables, but they're either too big or too complex for the amount of welding I do, but this one looks like just what I need. I watched your first video on the big table, and I was on the edge of my seat, waiting for something really dramatic to happen because I'd read the comments first, and the way people were reacting I was sure you were going to the hospital, but all those Nancy's were overreacting. If one bandage covered all the damage after completing a project that big, that's a huge win in my garage. I got a C by the way on that.
Dave, thank you for your comment. I appreciate you watching my videos! Good luck on your table build.
Goodjob
Thank you.
Alright no one else has offered. If you want some tips on welding please feel free to reach out to me.
Thank you, where are you located?
I’m starting with tig welding, is it ok for me to rest my hand holding the torch on the table?
where did you go to get your 1/4 steel plate for top. great job
I got it at Short Iron. 2 locations in the Dallas Fort Worth area.
Good video, do you think 1x1x1/8 tubing would be strong enough for the frame on a table like this?
That size would not be my first choice. That being said, if you reinforce it enough with cross bracing yes you can make that work.
No.
Hey mate nice job, is there any chance you could put up some measurements please i want to make 1 the same
The top is 1/4” 2’x4’. 1 1/2” tube for the rest.
What cutting saw do you have ?
I have an evolution saw 10”. I did not cut this project up my metal supplier cut it up for me.
Nice table and it appears to fit my needs. Can you share dimensions? Ide like to order supplies this week to build one this weekend.
The top is a 24”x48” I did mine at a bar height. Measure out the bar height in a house and subtract the height of your casters.
@@TheImprovementChannel Thanks for the information!!!
What is the chair you are using
That is a bar stool that I purchased at Northern tool.
What is the chair ur using
This is a stool I purchased at Harbor Freight. I think I paid $40.
How thick is iron plate in mm ?
12.7 mm
What sliding metal cutting saw is that?
Evolution 10 inch sliding miter.
@@TheImprovementChannel Is this a legit metal cutting saw or is it a modified wood chop saw?
@@joea.6017 I would call it a legit metal miter saw for a weekend warrior. It is pretty much a modified wood saw that turn slower for metal, but it has been good for me.
Nice video. What did this cost to make in materials?
Good question, the materials keep changing that have gone down a lot. I was lucky to get this one sponsored and it did not cost anything in materials.
@@TheImprovementChannel The cost of a diy table is my FIRST priority, then the structure. I like the structure of your table, but without a source and costs, it is of no value and I have to keep looking..
Can I interest you in the fantastic google machine? Answers all your questions!
If you run a welding filter over your camera and you cut out the distortion on the video.
But apart from that a very good video, especially with the measurements in both imperial and metric (centre meters) most measurements in metric are given in millimetres (mm).
I appreciate your comment, I am trying to add the metric measurements going forward. I use an iPhone, what kind of filter would you recommend?
@@TheImprovementChannel on the filters use out of a handheld fixed filter mask, say like for gas welding goggles for a far off view and a arc or a mig filter for close up shots, you could also up the frame recording speed say like from 60 fps to 120 fps or 160 fps to cut down on the interference when welding.
The welding filters are great for getting that arc shot, the fps can cut out the flickering and the distortion of the picture, the other side of it is have the mig weld far away from the camera as the high electrical frequency can affect the viewing of the recording.
@@philipburrows lots of great info! I will use all those tips in up coming videos! Be patient I have already filmed a couple of videos that I did not have you info for. Thank you for all your help!
Where to we get the measurements
It is a 2’x4’ table that is 42” tall.
@@TheImprovementChannel and wat about size of the metal tubing
@@joseramirez9932 I used 1 1/12 inch a 14 or 16 gauge will work great.
to be honest those weld look terrible.. 2:22 it looks like you are making straight lines but it comes out all blobby .....or is that fluxcore? that explains its the slug then
I am not that experienced of a welder.
@@TheImprovementChannel Ugly doesnt matter if it holds together
What are the measurements/sizes for the table steel pieces? I assume this video is supposed to be about building a table and not about selling stuff for amazon??? Please add that information to this page.
I tell the sizes in the video.
Wherever did he say anything about Amazon? This guy's just trying to help people and maybe make a buck, why be a hater when it's so much easier to just be nice or say nothing at all?
This video is going to the moon!🚀🌕
No doubt
Not relying on them weld it's not.
@@philleeson7835I don’t think I understand your comment. Can you elaborate?
@@logan_wright look at the quality of the welds. They wouldn't make the street corner let alone the moon
@@philleeson7835I get it now. I wonder if @theimprovementchannel can weigh in on this