(Hera arms Part 2) Installation conversion kit Heckler & Koch HK SL8 ACR Instruction Install how to
Vložit
- čas přidán 11. 08. 2023
- Part 1: (Unboxing)
• (Hera arms Part 1) unb...
Problems I found:
1. Scratches
2. Some ACR stocks do not fit
3. Pins walk out
4. Need to modify Two H&K springs to install trigger
5. Lost "Last round bolt hold open" (LRBHO)
How to Disassemble SL8 trigger:
Part 1: (Safety selector Left and Right)
• HK SL8 Part 1 - Safety...
Part 2: (Index Plate & Notched Disk)
• HK SL8 Part 2 - Index ...
Part 3: (Locking Lever & Actuator/Front Pin)
• HK SL8 Part 3 - Lockin...
Part 4: (Hammer, Elbow spring)
• HK SL8 Part 4 - Hammer...
Part 5: (Sear, Bolt catch & Trigger)
• HK SL8 Part 5 - Sear, ...
Keyword: conversion, PSG, ACR stock, buttstock, kit, Gen 2
Part 1: (Unboxing)
czcams.com/video/UsJ5siFH9TM/video.html
wow thank you, bought one of these a year or 2 ago for my SL8 and had to find grainy picture instructions online, it never shot well since but after watching your video I realized the spring issues I did know it has, and that I had installed them wrong. Going to go fire it tomorrow and see how it feels.
Great video, very informative! 👍
Thank you
Thank you so much! Then I’d switch to the AR style ones with the adapter. There’re more options and much cheaper.
I wish you'd made this video a year ago... I had to put mine together with nothing more than a "step-by-step" forum post from 2010 and Hera's shitty "instructions" they e-mailed to me.
I can't think of many things in my life that have made me angrier than trying to install the Locking Lever with no instructions. FML.
IMO, They should make the Gen 3. haha
Worked amazing!
Great instruction thank you.
You are welcome
Thank you for the great video!👍🏼
You are welcome
Great tutorial for me! May I ask what butt stock you’d recommend to suit this kit? Thanks
None of the ACR butt stocks will fit directly. The original side folder one is the easiest one.
Do not file/modify the ACR stock to fit. They are expensive now.
You should file the Hera instead. It is aluminum. It just takes time. Be patient
One more question: it seems the Index Plate Compression Spring is the only part needs to modify to fit into the Hera setup, correct? Thanks!
@@xinyan3937 Yes.
Also, Bolt catch is kind of loose too. Mine lost the Last Round Bolt Hold Open. I don't bother to fix it anymore
@@rooftopgunguy Thanks! And I also have some complaints over the finishing of this Hera setup: so far I found two machined areas are not aligned well, one is at the AR buttstock adaptor and the other at mag well pin hole. I’m hesitating in whether or not to proceed.
What is the width and diameter of the AR trigger pin you use in this video?
Small AR pin diameter are generally 0.154 in. in diameter
@@rooftopgunguy thanks brother. Just wanted to thank you for this tutorial. It's very well done and saved me a lot of money. I didn't have the slave pin and it was a real bi*ch to do. Thanks again
@@farrelldewar9800 you are welcome
Is this for air soft or real?
Real
let us know how it shoots!
It shoots great. No jams. But I lost The LRBHO. It is caused by the Hera tolerances. The bolt catch is too loose