How to Make your own Stranger Helmet
Vložit
- čas přidán 5. 09. 2024
- In this video, I walk you through how I brought the Star Wars Acolyte Stranger helmet to life. I wanted to bring you all the behind the scenes of this build. This helmet is one of the easiest builds you can do. Thanks for watching, everyone! I appreciate your support and hope you enjoy the video. Follow along and build on!
If you want to help support the channel check out my all the new merch I just dropped.
millenniumwork...
Follow me on
Instagram @millenniumworkshop
TikTok @Millenniumworkshop
If you're looking for a great file for this build Check out Pew Pew Crafts. The file used in this video was from Pew Pew Crafts Patreon
Esty shop link. surl.li/wdafbf
Another great file
Mystery makers www.etsy.com/s...
I've watched a many Stranger Helmet builds and you have the best looking one by far.
Thank you so much that truly means a lot. Message me on instagram and I’ll show you the 4 I just finished they just keep getting better and better
This dude is so underrated he deserves more subs
Thank you so much that really means a lot to me!!!! I have a new video coming out Friday on how to make a light saber I hope you like it!!!!
Bro answered EVERY question I had about making this helmet!!🔥🔥
Thank you so much! I tried really hard to make this video easy for everyone!!! I’m glad it helps!!!
@@Millenniumworkshop do you recommend that specific truck bed coating that you used or do you think any truck bed coating is fine?
Just finished its crazyyyy hot much work goes into making something like this! I do not have the patience for it😂
It’s a lot of work! Thank you so much for watching
I like how you lightly did the graphite powder, that’s smart.
Thank you so much.
LOVE the weathering details on this build! Gave me some ideas for my saber projects! Thank you so much for sharing!
You are so welcome! Good luck on your saber project
That was a Fantastic video. Great Job . Thank you for sharing with us how you accomplished such an awesome Helmet
Time lapse was also very cool. ⚡️😎
Thank you so much Ed you’re always the best!!!!!
Insane work! Love how it came out Rex!
Thank you so much! I’m so grateful to have your support
Killer video!! Straight to the point, and a lot of great information to help build about anything. 💪
Thank you so much bro means alot
great build video, bro. super cool seeing it all come together. #ROADTO600
Thank you so much! It was a blast to make!!!
You just gained a sub
Thank you so much again!!!!
Looks amazing rex
Thank you zombie! You the man!!!!
@@Millenniumworkshop np bro 👍
This came out amazing 💥 i love the truck bed liner step how you just have fun with it, overall 10/10 video hope to see more in the future Rex!
Thank you so much! Really means a lot!!!
Looks great dude! I'm getting ready to start painting and weathering mine
I hope I can see your final! Make sure to send it to me on instagram! I would love to see it! Have fun with it
@@Millenniumworkshop to my surprise I already followed you on Instagram! Lol I’m looking forward to all the weathering!
Amazing video! Super informational!!
Thank you so much! Really means a lot to me
Nice!! I’ll be using a bit of airbrush on my build w a few different paints but really great turnout on yours man🤘🏾
Also great to see it fit in the bambu as that’s what I’ll be printing with as well!
pretty good overview of the process!
@@CollectingHavok thank you so much!
awesome video
pretty kool to see how it was done !!!!
i am super excited for my helmet !!!!
Thank you so much
So hyped for mine bro! Amazing work! 🔥
Thank you I can’t wait for you to see it in person
Great video ❤👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Your support is always amazing thank you!
I wonder if I you can turn the stranger helmet into a welding mask.
I use a Hobart face shield as the visor! But I would not recommend using it actually for welding lol
thats amazing.. hes my new favourite character for sure, will you be selling these or will hasbro be making them ?
Thank you so much!!I do commissions yes I got a pretty long list right now of bills that I’m doing for people, but you can always message me on Instagram to get on the waitlist
Good work man!!
Thank you so much!!! Means a lot!! I put alot into this video!!!
Amazing work bro 💪🏽💪🏽💪🏽
Thank you so much
Hey, I have a few questions for you if that's okay. What file did you use, what infill density did you use, what size did you have that at, did you have a trick to not use as many supports. Also these next questions you dont need to answer but only if you can but if you can tell what infill pattern, layer height etc and how exactly you measured it. That would be amazing. Also you have earned yourself a fellow subscriber now😊
Thank you so much for watching it truly means a lot! The file I linked in the description it’s by PewPewCrafts, the link will take you to his Etsy to his shop or you can look him up on patron as well. He is a great dude for sure. Infill density 15%. Layer hight .12 -.16. Supports tree slim with 25percent threshold angle. Infill pattern some was printed with grid and some with gyroid! Parts I wanted stronger then others I went with gyroid! The entire build was printed at 99 percent scale on his new updated file his first file I had to print it at 85 percent so the new updated v2 is almost perfect sized for someone with a 24in head 99 hits it on the money with perfect amount of room for padding and lining. I also made a video for that and how to make the strangers gauntlet! And today his light saber! Again thank you so much if you have more question hit me up on instagram…. Have a great day and again thank you for following! Welcome to the Workshop
I'll make a metal One, One day
I would love to see that
@@Millenniumworkshop When I do I'll give you a shout
Can i buy it?🎉
I wish I had a 3d printer to do this, I have to figure out how to do this with cardboard and foam but 3d print looks so much better :((
3d printing is much easier! But I will have to say making something like this out of cardboard or foam is an amazing skill! I would love to see the progress of that! Message me on instagram so I can see it as you build it!
@Millenniumworkshop will do, I need to get some materials first, but I'll try my best to make it look as good as yours
Htf does this dude only have 616 subscribers?
I’m at 618 now! Hahaha thanks so much!!!
Absolutely amazing tutorial! Definitely following this guide! I just had a few questions regarding the Clear Coat?
Between which steps are you applying the Clear Coat? Are you doing it between each different paint or just after the primer?
And is it possible to Clear Coat the Silver Teeth since I know sometimes Clear Coat doesn’t react well with Silver or/and dulls it
I used a matte clear! With these paints you can clear just about anytime! I cleared once I graphite powdered it and at the very end when it was done! I did not clear the teeth!
And thank you so much for your kind words. Don’t forget to check out the how to pad and line the entire of that helmet!
awesome build, turned out great! was wondering what printer you use? i can tell it’s bambu lab but i want to know which model :)
I used the p1s it’s a great printer!
I was wondering if you were able to suggest an equivalent to the Satin Dark Walnut, I live in Australia and unfortunately the range of Rustoleum paints are quite limited and this paint is not available anywhere. Is there any kind of Montana Gold paint you would say that would achieve a similar colour to the Dark Walnut or something like the Rustoleum Satin Espresso?
Thank you very much to replying to all our comments and questions! Keep it up and you'll be at 1,000+ subs and beyond in no time!
Thank you so much! I would try Montana shock dark brown, or Montana ebony brown. The goal for me was a black brown the darker the better but not just black! Good luck hit me up on instagram so I can see your finished helmet
@@Millenniumworkshop Thanks for that! Gave you a follow!
Lets gooooooo!
@@starwarssith66 I’m going!!!! Hahahahah
What was the purpose of the truck bed spray, was it filler, texture, or something else?
I used it to bring a good texture to something that looked dirty and it gave the helmet some age!
Let’s gooo
Thank you so much!
How is the vision? Would it be possible to troop in one of them or would I be walking into everything?
Honestly, if you get the interior padding right and you get it perfectly aligned on the eye, I can see really well through it. Surprisingly, it’s better than what you would think. Also the file from pew pew craft. I have an updated version where the eyeholes are a little bit bigger now which one of them that I make now will have that, but on the original version, it’s actually not that bad.
awesome video! what kind of clear coat did you use?
Thank you so much! I just used a matte clear rust oleum
What 3D Printer do you use now? I don;t see the CR-10
For these helmets I used my Bambu p1s for all parts!
Great work and end product blew me away 🫡
I would love to have one. Have you made or consider making the arm-guard too?
I have made the gantlet! @starwarssith got one!
What if I Swapped out the bed truck liner and put in a "MTN Pro rust effect." (Brown color instead of black) Does it make any difference?
I have not tried that combo! If you try it and like it hit me up instagram so I can see it
@@Millenniumworkshop alr
But I'm curious, is it difficult to see out the helmet once it's done?
You can actually see much better than you would think! Also on the new updated files from pewpewcrafts the eyes are a little bigger!
@@Millenniumworkshop Thanks for the reply Rex
You don’t even need the rest of the costume since the character took it all off
Hahahaha I need the costume no one wants to see that lol
I wanna print one so bad but I don’t know how to slice and fit them on ender 3 since my baseplate is too small:/
Message me on instagram and we can talk about how to cut it up or I can always print it for you I do diy kits
@@Millenniumworkshop ohhh that’s awesome you do DIY kits. I’m watching a CZcams video right now on how to cut up pieces. I’ll send you a message on Instagram though. Thank you for replying!
I started out with an Ender 3 too so I know exactly how u feel, about trying to print helmets but having the buildplate be too big. Once you have enough money, try investing in an Elegoo Neptune 3 Plus, the build plate is much bigger and allows u to print helmets in full (depending on how big ur head is)
Does the 3d printer come with a camera in it or u stuck ur iphone in there??😂😂
Do you sand the truck bed liner? And did you sand the helmet after you applied the filler before the truck liner
I did not say on the truck bedliner I want to keep that texture. I did slightly send some of the primer the filler primer just to get a smoothie down just a little bit before because I wanted to control the texture with the truck bedliner. Hope that helps.
hopefully you see this!, i downloaded the files and i have everyhting sliced except the teeth, for me they are together and are hard to print, how did you get yours to be in 4 sets?
So pewpewcrafts they have a v2 file where the teeth on both sides are printed as one. If you print that straight up and down you should have no issues. When I filmed this video it was the older file so all the teeth were separate! You can still down load the older file and use those teeth if you want I do believe! I hope this helps
@@Millenniumworkshop THANKS!!
Is there a chance to get the blueprints for 3D printer?
The link to it is www.etsy.com/listing/1750373185/
@@Millenniumworkshop thank you
Hi , ım having some problems while printing the stripes(teeths) can you show me how did you print in slicer?
Message me over on instagram! I would love to help!!
what colour did you use for printing?
Good question black in my personal favorite because when you sand it, it will turn gray and helps you see the problem areas much better
What scale did you end up printing this at?
88 percent scale fits a 24 in head
You keep using a glue, what is it called`?
MITREAPEL CA Glue with Activator you can find it on Amazon! I hope that helps
@@Millenniumworkshop Thanks, and how did you get thoes cool effective supports for the helmet?
How big is your print area?
250x250x250 mm standard Bambu
Can i buy it from you?
Message me on instagram!
@@Millenniumworkshop okey😎✌️
@@Millenniumworkshop done✌️
🫏🙇🏾
Thank you so much!
why you waste your amazin talent doing this Garbage Helmet and I say is garbage cause the show is garbage .. You actually did an amazing job making this helmet Amazing work!!
Hahaha thank you so much! I just like to make different stuff and that helmet just was like I saw it and was like yep I need to make that hahahahaha
Does the 3d printer come with a camera in it or u stuck ur iphone in there??😂😂
@@starwarssith66 yes I the printer has a camera built into to hahahaha