S95B 1520 software erased my ANA PEAK picture settings in service menu,i got them back
Vložit
- čas přidán 12. 10. 2023
- You need enter to SM with Mute, 1, 1, 9, OK, OK. Then: 1, 2 , 3 and 4.
Put above Advanced and then VOL+ during 5-6 secs. Now go to EPA.
Then you only need change ANA_PEAK2 to 1023 (after shutdown the tv, remember down the ST2084 to -2) to follow PQ EOTF curve.
ANA = Automatic Nits Algorithm
ANA_PEAK1 = Just control the peak brightness in 10 window pattern. Max value = 1023, that equals to 1000 nits.
ANA_PEAK2 = Just control the peak brightness in 1-10 window pattern (1 to 5=1500 nits, then go down, so 6 =1400, 7= 1300, 8 =1100, 9 = 1050, 10 = 1000 nits. Thats because the name of Algorithm). Max value = 1023, that equals to 1500 nits (683 by default in firmware 13XX, that equals to 1000 nits). - Hry
1620 seems to be a safe update with a few noticeable improvements. 😊
Thanks for info,i well check it in few days✌️
Hi,now is 1622,best software for this tv,they finaly fixed tizen,everything works as should,fast and no lag when scroll fast in menu
Yeah I was looking for the Ana Peak setting in the secret menu and I could not find them anywhere. Did 1520 remove them? 😂
Hi there,Ana peak still there,open serive menu hospitality mode first,than press 1234 and you will see advanced option,scroll on it and press and hold volume up for about 10 seconds and new features will pop up,go to EPA and there is ana peak,enjoy bro✌️
Hi I have the same issue, but I don't have the advanced option 😅
Am I supposed to do something to enable the advanced mode ?
What exactly does anapeak do please does it affect sdr brightness ?
@@tsumade0hi yes,please read above,thanks✌️
@@leighwilliams3163hi there
ANA PEAK 1 and 2 mean Automatic nits algorithm,by default is set to 1023 and Ana peak 2 to 683,we must change from 683 which is 1000 nits of brightness to 1023 to get all 1500 nits for sdr and hdr,you dont break your tv or picture quality,you just restore tv to out of the box full brightness