First things you MUST do with New LG OLED
Vložit
- čas přidán 12. 06. 2024
- A few tips on the first things i feel you should do on a new LG OLED TV.
Like what i do on the channel or have helped you out? then you can show your appreciation with buy me a coffee
www.buymeacoffee.com/Thetechg...
Check out my Amazon affiliate shop🙂
Make your next Amazon purchase via my affiliate link,Amazon then pay me a small percentage of that sale,but at NO EXTRA COST TO YOU WHATSOEVER 😀
UK link - (link also contains tech that I use and have purchased)
www.amazon.co.uk/shop/thetech...
US link -
amzn.to/2Pr5qr4
Follow me on Facebook - m. The-Tech-Giant...
Follow me on Twitter - / thetechgiant1
Follow me on Instagram - / thetechgiant1
If you are a company and have a product that you would like me to unbox and test out on my channel then you can contact me directly at -
thetechgiant@yahoo.com - Věda a technologie
ATTENTION!
I made a mistake by saying to set the Logo Brightnes to low,when it actually should be set to HIGH!
Thank you very much for making that clear, I was confused because you said on a previous video set to high..Many thanks 🙏
THANK YOU FOR CLARIFYING, had to go back to the previous vid you made because I thought you mentioned high. Thank you good sir
People don’t read basic instructions that come with tech. 🤷♂️ their loss once the tech breaks.
Wonderful....I have just recently purchased C1... I am seeing it's LED is blinking thrice while booting ...is it normal...checked with the LG tech and they said it's normal...however I still have a doubt...please help...
Paul, why not add this to the actual video, where it will be seen. Leaving it as a comment, albeit a pinned comment, isn’t really a visible way of alerting viewers to your mistake
In my experience there is no need to shorten the auto-turn off time for avoiding tv burn in with a stuck image: the "fireworks" screensaver will auto start after a few minutes of stuck image.
That's only if you are not using an HDMI input.
I rolled my eyes at the first tip of removing the plastic from the back....then realized I still had the plastic on the back of my C1! So thanks!
I've had my 48" C1 since July and never noticed the plastic film on the back, I checked and it was still on, I've just removed it. Thanks, Paul. Without this video I would never have realised.
I'm positive that there are more LG OLED's out there with it still attached than ones with it removed 😄
I made the same mistake with my first OLED.
What's wrong with it on?
@@TeamLinxYT ventaliton is bad with it on and can cause the tv to get hot and more likely to get burn in, i got c9 and no burn in 2 years in
And it wouldn't have mattered.
@@killerkt9 why is that?
Thanks I just pulled the plastic off the back after 2 weeks of use. It was applied smooth with no bubbles so not surprised I missed it.
Just got a new LG OLED.
Never thought I'd get such good advice from a giant! 😄
From Brazil here. Can't wait for my 65' C1 that i purchased one week ago !!! Thx for the reviews !
Just a quick thank you for this information. I was completely unaware of the plastic sheet on the back of the TV. Reviewing the instructions, I do not see it clearly stated on them which makes your video all the more valuable. I also agree with turning off auto updates as I would rather have a few real world testers before we experience the unexpected. Keep up the good work.
Whoa this dude really is a Tech Giant and that deserves a sub. Thanks for the tips :) I have a 65" C1 making it's way to me now and this info is very helpful.
Got mines last night and I'm still fighting with the not so crispy image on Cable. Maybe once I run It thru my Onkyo it may get better. Colors and black though look great. Good luck
Can you make a video on the recommended settings for PS5 and Xbox series X for the LG C1 TV?
I'm getting my C1 tomorrow. This is so helpful. Thanks a lot mate. 👍🏾
No worries bud.
Hope you enjoy the new TV 👍
Just ordered my LG c1 77inch it's coming on January 10th been watching your channel for ages now keep up the great work 👍 👏
Thank you.
Hope you enjoy the new TV!
Hi Paul, thank you, I gained in brightness just by deactivating the eco mode !
OMG! I can't believe I didn't notice the protector on the back of my LG C1! Very informative Thank You..
You deserve a like and definitely subscribed!
I bought my b9 back in 2019, and removed the foil like 2 weeks ago lol. Nothing happened thankfully, but the TV was indeed warm as hell, but I thought that was normal back then.
I would have never discovered the protective film on the back of my 22 LG OLED without watching this. Unreal catch
Hmm, my C2 didn't have the film on the back, only the front. I'm confident that it's a new set though, everything else was wrapped up in original packaging. Interesting.
@RADER FPV yep i also didn't have one on the back.. only the front
My C3 didn’t either.
@@pete9b 👍
Thank you so much! I had an lg A1 set up for a week now before I watched your video; turns out: I hadn't removed the plastic wrap from the back either!
Thank you, Tech Giant, for the useful info. 👍
Seriously m8. You have really good contents and to be honest I followed your steps showed in this video and I was really impressed with the outcome. Really glad that I found your channel. Lots of helpful videos. Thank you 🙏
I appreciate that!
I have owned an oled c1 for a few months now. I just recently switched rooms and decided to recalibrate my tv settings. I was looking through youtube and found your channel and guess what? I never knew there was a screen protector on the back of the tv! Thank you!
No worries mate 🙂
Appreciate the video. Question regarding the auto off. Since we have a cable box and use the cable remote to control the TV I am curious if the auto off time works correctly when using the cable remote instead of the LG remote. Thanks.
Thank you for that information about the film on the back, I had no clue it was there. It took a bit of picking at it to find a corner to peel it.
Thanks for the video. I am getting my LG C1 this Thursday and I'm really excited about getting it as I've heard nothing but good things. I have no doubt it will ask me if I want to do a software update as soon as I go to set it up. Would you say it is OK to do the current update or not? Thanks in advance.
Good tips! My C1 77" is coming this Saturday!!! I can't wait!
Lucky dude! Enjoy that wicked piece of machinery
Hi thanks for the tips I got mine Monday from Best Buy delivered my LG C1 65 I hooked it up yesterday my step dad helped me I just took the back plastic off thank you so much my software update on my tv atm is at 03.15.95 should I update it or no HDCP 2.3 and 4K HDR 60 and 120 work fine I’m just wondering before I do anything?
Just received a brand new 77 c1 today.. Removing the plastic was a satisfying experience.
Peeling off the plastics is a highlight of any TV unboxing
Thanks for the energy saver tip !
I did not know about the clear film on the back! After watching the video, I went to my TV and initially did not feel it. After rotating the TV around, I eventually saw where it was a clear film. Great tip.
Also, for some reason, my TV and a friend's TV does not have the option to change the time for the Auto Off function. It's set at 4 and can't be changed. Maybe the firmware changed? Not sure.
I've noticed if you are playing on a console, the tv will auto power off after the standard 4 hours. Strange but I advise turning this up to 6 or 8;hours. Depending on how long your gaming sessions are.
Thats not controllable as far as I know, LG Oled tvs are hard programmred to do a quick pixel refresh every 4 hours regardless of settings
Just got the C1 and I was wondering why the games I played that were in SDR were pretty dark and had no pop. It was all because energy saver was on 🤦♂️. Thanks for the vid!
Great video just in time. Got a 77 C1 coming tomorrow from Costco, buzzing!!!
Once again, thank you very much for your valuable tips. Nice, KEF Eggs in the background. These are realy great speakers, i got them in ice-blue.
THANKS! Had the film still on😊
You are not just the best boxer but a great tv reviewer!
And yep, got the C1 on Monday, today's Wednesday and the back film was still on. Thanks and keep the tips coming (especially about the software updates). I just subscribed!
Cheers for the sub mate 👍
thanks for the tips tg nice easy steps to follow are thes tips in the instrutions i womder .glad i just chk out youre helpful vids and now im sorted bought a 48 c1 in the last friday got £100 off marked price very happy with the tv. keep up the good work.
I bought lg c1 55 inch oledvon my birthday last week 😍😍, my xbox x works so so great 😍😍
Hi Paul, thanks for your great video, I just on the middle of honeymoon with my new C2 48" just arrived a week ago and I have followed your suggestion to keep it on good shape. Nevertheless, I found some bugs when I use my Alexa Echo dot 4°gen giving order to the TV, for example, sometimes when Alexa turn on the TV, there is no image or when Alexa changes volume or open an application it indeed is opened but without any sound although I keep jump thru applications. I must turn off/on to get volume again. I have seen these problems only when I use Alexa for giving an order, on the other hand, when I connect my AV Yamaha 7.1 or my PS5 it works flowless and have not seen these errors only with Alexa voice control. Have you heard about these Alexa bugs by other users or how to solve them out or shall I send back the TV in garantee and get a new one? Thank you!
Hi mate I have been watching you videos and I recently got a LG c1 but your tv looks well brighter then mine what picture setting do you use if you don’t mind thank
Hey Paul!
Great videos! I bought a 65" B2 about 4-5 Months ago, and didn't remove the front or back plastic. I spoke with LG and they said it may cause overheating and burn in, but I haven't noticed anything. Is there a way to test for that?
Hi, you mention for Adjust Logo Brightness to take the best care of the tv it should be set to low. But you made an entire other video about setting it to high, theoretically increasing the dimming effect on a logo. Most people in the comments seem to agree with the High setting. Can you elaborate more on this? Thanks
i am still confused by that as well
@@hmello3250 looks like he just pinned a comment saying he accidentally meant to say, set it to high 👍
Yes this was a mistake on my behalf and I added a pinned comment pointing out my mistake and to set it to high 🙂
Okay I'm so confused when I saw you said set to low. Thanks for the comment section for clarification
I am very grateful to each of you who know how I can memorize the clock on the LG TV, since I have now bought it new, it thinks that I can see the clock from time to time
Hi..recently purchased a C1. The TV doesn't seem to be responding to the echodot3 for handsfree voice control, except for ON/OFF and volume controls. Unable to switch between channels or open CZcams or Netflix by handsfree voice command. Any advise on this? Thanks
Thanks for the video. I think I watched a video from you (Not sure) where instead of plugging my internet cable into the internet port I was shown how to use the usb port. This supposedly really speeds up the TV. Can you shed any light on this? Thanks again.
Great video as always.
I tend to want to turn down oled pixel brightness. Have you heard of any disadvantages of keeping this brightness down? In my case I prefer at 50 on my C1 having a very light controlled environment.
Absolutely not. Higher values decrease pixel lifespan. Go with your preference.
I have it on 60 and it's the sweetspot for me 👍
yeah I dont think it hurts. its the equivalent of the backlight on LED, I think. if anything it'll extend the life. in case anyone isnt aware, in the big picture an OLED is like a human, its literally starts dying from the moment its turned on. but im a bright person my self. like Def Leppard said "its better to burnout than to fade away" ha ha.
Hi Tech Giant. Do you know a way to allow the LG C1 controller to be able to control the volume on a soundbar? Thanks!
Stumbled across your video and I'm glad I did! Just bought the C1 have it up on the wall and didn't even know about the film on the backside of the TV. I thought it was just glossy lol
Wow! Thanks Tech Giant. Just peeled the protective cover off the back of my new Oled 48C34LA. Tip: I used a torch light to find the corner and then its easy. Mine was already mounted on a swing arm so lucky I could turn it to peel it off. Cheers!
Great video again,I just remove from my c1 the plastic film from the back , I didn't know it was there all these time 😂
Holy Cow I would never have seen this protective film on the back. Thank you!
No problem!
I need to hook up LG oled through virgin cable, do I still need adjust tv settings? any advice appreciated
I just got the LG A1, Vivid is my favorite picture setting, but I’ve noticed some input lag, is there any way to manually turn on low latency without having to switch picture mode to game optimizer? It’s a lot less bright in that picture mode but I wasn’t sure how else to turn on low latency feature?
Vivid is trash
You shouldn't use that
Hi. I bought OLED48C14LB and the HDMI keep losing signal every now and then. I have to do a factory reset to fix this. Any idea how I can fix this? I watched your previous video and I cannot find the Quick start + setting. Any help would be approached. Thanks
my plastic was on the back of my CX for a bit but I took it off some time ago.
I tried on vivid for like an hour watching a movie and my oled was so hot I could feel it just stand in front of the tv. Just removed the protective film at the back now.
I have a LG OLED65C8PUA purchased in 2019 should i also set my logo luminance to high on the older TV I have had it on LOW now for 3 yrs or is that for the newer models of LG OLED's Thank you!
Wow! Excellent! Plastic removed! A bit late but it’s gone now! Thanks
I've had a 48 C1 for 2 weeks now and I had no idea there was a protective film on the back of it! Thanks
I faced tv switching off issues in my new cx 65 which disappeared after I removed the plastic film in the back
i saw this video and i must only check...protection on the back of the TV :) thx for advice
I picked up a LG C1 48" for $1100 at Best Buy Black Fri and I love it. Thx for the vid I will go thru my settings as recommended.
Dude I discovered that the back plastic was on both of my LG's the C9 and my new C1. There were no air bubbles so I completely missed it. I've removed them both, thx again.
Those Oled TVs are great Mirror's.
Noticed my sky menu has started to burn on my display. Only visible with red or green predominantly in picture. Any fix? Have tried the refresher.
Ive had my OLED for 3 years and have some heat damage on my screen. I noticed last week that my back plastic was still on.
Bought my first oled TV yesterday,65inch CX when i satarted to investigate on the oled i encountered your channel which is very good and informative subscribed to it on the spot thank you for the awesome vids on the cx (the guy i bought the TV from had it for 2years ofc he didn't know about the back protective film 😂😅)
LG C1 (03.20.80): Do you know where the hours of the panel has been turned on has gone? Before it was under "devices", it's gone frome there
Thumbs up. Can you give us your recommended settings for this TV?
Does turning energy saving step have to be off just to save electric sorry?
Hi Paul. Is there a risk of burn in from playing games and static images being displayed for example maps, life/health indicator etc? They are on all the time. How often should automatic pixel refresh run or should run at all? Which LG Oled model is the best? I consider buying 42 or 48 inch only. Does lack of DTS surround really matters? Some old movies are DTS 5.1
What does the OLED Care picture settings do (Comfort, Theater, Kids)
I got a C2 today but the sticker tabs on the bottom sides of the screen didn’t pull off the front screen protector film. I don’t know how to peel this off now and it has bubbles slightly in the lower left side. Any ideas how to get it off without scratching or marking the panel?
Thanks mate! 👍😊
Just picked up a C1 yesterday. Mine does not have the Auto Power off option in the menu. Just Energy saving step and screen off, no option for auto power off? Any ideas?
I have a LG OLED c1 65"..One question my sound bar only works with my cable box and when I use the mart features and go on CZcams or any of the other apps no sound comes out of the bar....also when I power of the tv the sound bar or cable box stays on
thanks for the Video I just put up my G1 yesterday an absolutely loving it
Hi, did you have the protective film on the back of the tv? Thanks
@@bal-b475 I don't think so it was only on the front of the G1 if I remember correctly it was set up by the store i got it from
@@Obenn1 ok cool, yeah mine was on the front too, didnt notice anything on the back, cheers mate
I Still have the protective film front and back, should I be worried?
Hi, just a quick question, I have the oled55e7n can’t seem to find the logo settings brightness any idea. Thanks
Why removing energy saving mode ? Does it bring more chances to have burn-in ?
Great video Paul as always. Bad what happened to your hallway hope it's fixed soon for you.
Another great video as always. I noticed you had an AV receiver in the background, do you mind if I ask what one it is pls?
Expecting my new LG OLED TV soon and this is just the start of c/o. I've just subscribed and 👍
Hi Paul just got a a c1 oled is there a way to close down all apps that are running in the background
Does the Energy Saving Auto mode adjust the OLED Pixel Brightness according to the room’s ambient light, or does it simply just dim the display as much as it can within a bright or dark environment to save energy? I like having my brightness adjusted in different ambient lighting environments so I have AI Brightness turned on, but i’m not sure if I should have this setting on also, can you give any advice here?
could you pleaqse do a video how to setup this TV for a PC with the most realistic settings for the picture? Thank you!!
I was confusing about logo brightness, setting it o high meaning brighter logo or maximum control of logo brightness. Thank you for sharing.
Bought G1, Great guidance & help ..... Can you make some video how can we use zoom or Google duo
Hy, question pls, i just both an LG G1 and wondering if i should remove the protective film from screen surface or should leave it there and protect surface from scratches or anything else ? Is it affect anyhow quality of image or made any damage to the screen it self if i leave it on TV ? Thank's for feedback...
No you’re meant to take it off as leaving it on will build heat.
Hey Paul question! I’ve seen some videos about changing your console game mode to pc mode in the LG Oled C1. Supposedly this is more accurate in order to get better gameplay. Is this actually accurate? I thought game mode was specifically for consoles?! What are your thoughts on this and what do you recommend me putting my gameplay mode when it comes to playing on my Xbox Series X? PC or game input mode?
I also heard that. But you set to PC mode by changing the input type, it's a different setting. You can change the input to PC AND also use Game Mode.
@@soniccinos oh yes the input type mode, I forgot to mention that. Thanks for that 👍🏽 What do you recommend?
@@Juniorgalle21 I'd just leave it in console mode and limited RGB, that's what the console has been designed for which is why it's recommended in the XBOX settings. You'd have to set the console to full RGB and the TV to PC mode to be outputting colour as you would on a PC but this could cause compatibility issues on a console and things may look wrong in certain cases (also, it's crucial that console and TV match i.e. limited RGB + console mode or full RGB + PC mode). There won't be any real difference in gaming image quality with the default settings and so PC mode will not gain you anything, just potential problems. I also don't believe there is any input lag advantage either, correct me if I'm wrong. Your console should switch the TV into game mode regardless of whether the TV is in PC mode or not.
@@playcloudpluspc no thanks, I'll take HDTVtest's advice over yours, Timmy.
@@LordAngelus That's your choice. He is the expert and I don't claim to be one (I am basing my comment on what works for me and my own research online), I was only trying to be helpful. There is absolutely no need to be rude about it.
Just got the 55" C1 ...on a TG video binge now 😆
Great! Getting my 65 inch c1 tomorrow so great tips to get me sorted
That's great mate 👍🙂
Just make sure you read my pinned comment about the mistake I made in the video 🙂
@@TheTechGiantCZcams yep, read it. Thanks for the reminder
Much difference in image after professional calibration?
Just purchased a 55 c1, and I don’t see the auto power option under energy savings?
How come low is better than high in logo brightness? It sound like high would be increasing the amount it's working to dim it?
I have a LG 65CX. I forgot to remove the protective plastic behind the TV. After a month of regular use horizontal withe lines appeared. Likely LG replace the panel for free. The technician said that the problem was probably due to the protective plastic. Greetings from Germany
I had a guy message me in the past saying that LG wanted to refuse a warranty claim due to it still being attached.
Luckily they fixed it as a good will gesture.
I see that you have the 03.20.80 installed same as my 55 inch C1 manufactured 11/21 Factory ID LZ yet like I posted earlier in your other video I don't have the auto off option at all, just the energy saving and screen off options are shown. Anybody else experiencing this on the 55 C1 ?
Me too!!!
@@douglasvitorio996 Mine as well!
I just bought mine and I totally missed the protective film in the back,. Thanks for that my friend.
No problem 👍
Thanks dude for the info about the protective film on the back.
I've had my C9 hanging for 2 years now and now i noticed that the film was still on the back lol
No worries 👍
Same here, mine has been hanging on the wall for two years, felt great peeling the film off, thanks!
Does anyone know what video is playing on the TV?
THANKS FOR THE TIPS TECH SHREK