Ender 3 V3 KE: Setup, Config, Test Print, Timelapse - Creality 3D Printer with Nebula Pad & Camera
Vložit
- čas přidán 17. 01. 2024
- Complete Step-By-Step Setup: Creality Ender 3 V3 KE 3D Printer. Binding to Creality Cloud, Updating The Firmware, Creating a Timelapse, and more.
Get the Ender 3 V3 KE: shrsl.com/4duh2
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
My "Must Haves" Amazon 3D Printer List: a.co/5RxTkYl
Upgrade your FDM Printers:
Get The Smart Kit Here: amzn.to/328eBDr
Get Cloud box, here: amzn.to/33fePJd
Get a Logitech Webcam Here: amzn.to/3JUpFFI
Get a CR-TOUCH Here: amzn.to/3oWhrnK
Capricorn Boden Tube: amzn.to/3FABHBp
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Find me on Facebook: / 3drundown
Find me on Instagram: / 3drundown
Find me on Etsy: GAETSY.COM
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "💗THANKS" button
Become a CZcams Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
Helpful video. Thank you!
Thank you, I appreciate this loads. Lee UK
Thank you! Very comprehensive
Welcome. 🔥🔥
Mines still in mail, can't wait to start throwing packaging to the floor as per your previous vid ;) Very funny and informative
THIS IS THE WAY! 🔥🔥
Thanks again. Very much enjoy your way of explaining things! I do believe you have the spool holder the wrong way around, although I don't think it matters much.
Looking forward to adding the camera, too. It's just not very well available here in The Netherlands. Will wait for Creality EU stock.
It's also nice to see it doesn't make all that much noise (especially compared to my K1 Max).
I offer you, exhibit A: store.creality.com/products/ender-3-v3-ke-3d-printer
@@3DRundown well.... no.
Please see 3.3 of the user manual. Also, the filament runout sensor would be on the right side. No biggie, but still... :)
It's just about the metal thingy being the other way 'round.
Thanks for the video. Just assembled mine today and printed the boat. All good...subbed.
Will the Creality K1 A1 camera work on the KE?
No. You should use the Nebula Camera
Newbie here, my first time ordering filament, any suggestions for printing something similar to a cellphone case which will need some flex but not much. Thanks for everything
Jusr assembled the KE thanks to your video
No PLA is gonna be flexible, but some are certainly stronger than others. For a phone case, TPU may be the way to go
Thanks for the video, this is my first printer, I set it up today. Watching your video I became interested in the camera and have already bought one. As for the sensor you mention at the end of the video, does it make quite a difference? Would it be a good buy? What term can I use to search for? A specific model?
Hey. Welcome. The G-Sensor something you should probably have. You can live without it, but pretty much all the fast Klipper printers utilize one. It's fairly cheap. Check it out here (and find the links to get it, in the desc) czcams.com/video/sR8cW45J8Cg/video.html
Hi mate do u plan on making a video on Cura setup ? or orca ?
Hi, this is what I have on ORCA so far, but, yes, I will be making more. czcams.com/play/PLWrqQ7NBLxmCdEwQTSINknTe-pGBylrZp.html&si=o88G-yBEY82Y3-kO
Is it possible to setup the nebula pad with a BTT Manta E3EZ running klipper on an Ender 3?
I'm nit sure. I would like to think so, but, I don't know.
10:25. Where can I get the lidar, and what is it specifically called/named
Far as I know, Lidar has not been released for the KE. However, I'll ask Creality
this is crazy got mine yesterday!
Epic!! Let's goooooooo
My printer runs great and I have not tried to update the firmware. I have heard of some people updating the firmware and it makes the printer give errors. is this true?
I've had no issues at all. After the update, run a calibration, before you print.
I just got it too! Do you know if there is a way to get timelapse videos with the extruder out of the way? I've seen timelapses online where the print is "growing" but the extruder sits in one place. Any idea if that's possible with this setup?
Yes. I explain it in this video....
@@3DRundownah found it. Thank you!!
Must have updated firmware? Mine does not have "Camera Site" in the camera settings
For the KE, go to Creality Cloud and update the firmware, or, can do it from the screen. The SE, is a manual process. I have a video on that
Mine is restarting during off set calibration, any idea what could be the issue
Yikes. Something is loose. Get eyes on all the connections. Could be a bad connection at the ceramic heater, which, would mean you need a new one. Check all connections carefully.
Is creality print app compatible/recommended for this kind of printer?
Yes. Creality print works well with the KE. I also recommend learning Orca
The only print I got to work was the bench test the ke comes with, everything I got off thigiverse fails after a few levels and gets stringy, the printer is just a couple. Days old
Sounds like you need to work on your slicing methods. Use Orca and watch my Bambu Studio and Orca videos. (They are the same)
So I got it working now and it’s printing great, only question I have now is the nebula camera gave me a nice time lapse of a 1.5hr print then I did a 27 minute print and did not get one , is there a certain print you have to meet to get a time lapse
Mine doesn't have the "Camera site" settings regardless of having the "Enable time-lapse photography" switch on or off, it also doesn't record timelapses at all and I'm losing my mind trying to get it set-up. :/
Do you send prints from Creality Print? (I would) Is your nebula firmware up to date?
@@3DRundown Yes to both, actually, downgrading my firmware brought the options back, still I get no timelapses, both printing through LAN via Creality Print or directly from the pad.
@@3DRundown Hey, I think I figured it out! It looks like there's a minimum layer count treshold for timelapses, I was only printing pretty flat stuff, but when I tried printing a taller temperature tower it made a timelapse!
I think that's it. It takes allot of pics, to make a timelapse. if the print is super small, it would be like a 2 second timelapse. Also.... Get started with printing from Creality Cloud. So many benefits, and, your timelapses will be there!
@@3DRundown They really should improve the Creality Print + Creality Cloud Integration, make it more seamless, it's so practical to use Creality Print straight through LAN, I don't know how I feel about adding adding a step of uploading my project to Cloud to start printing from there.
What slicer are you using?
Orca
Total noob. Is the reason we are not printing pre sliced files because we need to customize all the options to suit our printer? Is cura a good slicer to use with this printer or should we use crealitys?
There are so many hardware and environment variables at play with a model, and, so many different methods and techniques, to print a model. Then there are endless filaments, which behave differently as well. Slicing it yourself, is the way to do it. I like Cura allot, but I would consider learning ORCA for your V3
@@3DRundown thank you👍
This a very helpful video. I do have one criticism... I don't know what it is about the man in the video but his eye contact makes me uncomfortable. I really enjoy the style of the host? presenter? Anyway funny guy and very helpful! Just the eye contact though. Very sorry.
I will continue to stare into your soul. Deal with it.