It looks like you will need to install crowsnest in order to make changes after the initial install. here is the link - crowsnest.mainsail.xyz/setup/installation . I haven't tried this myself, so let me know how you go :)
I followed all the steps correctly but after I typed reboot, the Mainsail web interface didn't show up. The printer went offline for a bit and it was active back again but nothing happened afterwards. Any ideas? I restarted the putty window several times but that didn't work either.
Damn sorry to hear you are having issues. Did you make sure your printer firmware is up to date? If so, you may have to try restoring to factory settings. Here is a link on how to do that :) guilouz.github.io/Creality-Helper-Script-Wiki/firmwares/reset-factory-settings/
I've seen something called a 3d Chamelion which doesn't look overly user-friendly, and then there is the Co-Print multi-filament module, but it costs about the same as a Bamboo Lab A1 with multi-filament combo at around $770, so not worth it. At this stage, manual filament swap is about as good as you are going to get :(
Hey, very random issue I'm facing here. I have a nebula camera but for some reason the camera feed on creality cloud just isn't displaying. I can control the printer from an external internet source but the camera only works when I'm connected to the same WAN. I've already configured my router firewall to allow out/in for the printer, I've also setup port forwarding on port 8080 and 21 but still nothing. Any thoughts on what to try next would be appreciated.
Yeah, I have that same problem. I think there is something wrong with the service on Crealities side of things... A work around is to install the octoeverywhere service using the installer script I use in this video. It is a free service that allows you to monitor your camera feed outside your network. Should do the trick :)
This currently does not work, i dont know why but it just doesn't, dont even try. Suposedly the tools are not able to get some packages... But idk ill read the github comments
Sorry to hear you are having issues 😕 it does work, but I guess some webcams are not compatible either way you try and install them. Best to just get a creality webcam so you don't run into any compatibility problems.
@@LayerLabAustralia The camera part does work, but the moonraker server in the printer does not work, as when its downloading its not able to get its dependencies, this problem is present for both option 2 and 3 of the install menu. Now i view the camera with the creality web interface, but i suppose the moonraker one was way better.
Cheers bro, was trying to figure it out for a while
Instalei o timelapse mas não apareceu e agora?
Working 💪 thanks ❤
Woohoo 🎉
hi, it worked well.
btw there is a method to change resolution after the installation?
i've choosen 720p but i want to try 1080p
It looks like you will need to install crowsnest in order to make changes after the initial install. here is the link - crowsnest.mainsail.xyz/setup/installation . I haven't tried this myself, so let me know how you go :)
Hello! I would like to ask if the a web cam like yours, will work in OrcaSlicer Device tab?
I don't have any experience with orca sorry 😞
I was able to install everything but the two cameras I have don't work with the KE.
Aww dang. Why is the name of the webcams you are trying to use?
It wants a username and password for my github, it then wont auth. Stuck on the first script...
hmm. what URL are you using? can you copy paste in here?
go to the link next to helper script and there are instructions and a copy friendly text.
@@lanceshipley7139
41 / 5.000
I have the same problem. asks me for username
I followed all the steps correctly but after I typed reboot, the Mainsail web interface didn't show up. The printer went offline for a bit and it was active back again but nothing happened afterwards. Any ideas? I restarted the putty window several times but that didn't work either.
Damn sorry to hear you are having issues. Did you make sure your printer firmware is up to date? If so, you may have to try restoring to factory settings. Here is a link on how to do that :) guilouz.github.io/Creality-Helper-Script-Wiki/firmwares/reset-factory-settings/
hey,, my webcam is not showing up in octaveryehere dashboard
aww dang. have you installed the webcam support witht the install script I show in this video? What webcam do you have? What printer?
Would there be any modification to install an extruder with more colors on the ender 3 v3 ke? up up up
I've seen something called a 3d Chamelion which doesn't look overly user-friendly, and then there is the Co-Print multi-filament module, but it costs about the same as a Bamboo Lab A1 with multi-filament combo at around $770, so not worth it. At this stage, manual filament swap is about as good as you are going to get :(
What web interface are you using to acess those options?
Ok mainsail.. I cant acess mainsail but the camera works just fine
You can install mainsail using the helper script I use in the video :)
Hey, very random issue I'm facing here. I have a nebula camera but for some reason the camera feed on creality cloud just isn't displaying. I can control the printer from an external internet source but the camera only works when I'm connected to the same WAN. I've already configured my router firewall to allow out/in for the printer, I've also setup port forwarding on port 8080 and 21 but still nothing. Any thoughts on what to try next would be appreciated.
Yeah, I have that same problem. I think there is something wrong with the service on Crealities side of things... A work around is to install the octoeverywhere service using the installer script I use in this video. It is a free service that allows you to monitor your camera feed outside your network. Should do the trick :)
@LayerLabAustralia thanks will give it a try this evening.
just rebind printer through phone
Could i use a laptop’s inbuilt camera? or a camera on an phone?
Possibly...although I have never tested with either of those so I can't say 100%. Give it a try!
This currently does not work, i dont know why but it just doesn't, dont even try. Suposedly the tools are not able to get some packages... But idk ill read the github comments
Sorry to hear you are having issues 😕 it does work, but I guess some webcams are not compatible either way you try and install them. Best to just get a creality webcam so you don't run into any compatibility problems.
@@LayerLabAustralia The camera part does work, but the moonraker server in the printer does not work, as when its downloading its not able to get its dependencies, this problem is present for both option 2 and 3 of the install menu.
Now i view the camera with the creality web interface, but i suppose the moonraker one was way better.
What webcam are you using?
@@LayerLabAustralia An old logitech 720p
@@somethingsfishy2695
It worked for me with a Logitech. Worked as in past tense. It for some reason stopped showing the camera feed.
is this safe?
yep :) Just follow my instructions and your printer will be better than ever.