Good question. If you're planning to add a can at some point then this is a great way to do that as an add on. I didn't notice any difference in accuracy but the tactical solutions barrel is lighter and some folks like that.
Thank for the suggestion Much appreciated...I generally do more of an overview than a specific review of the gun specs. However, going forward I'll try to add more of the details. Yes, the barrel and comp are the only mods. Hope you'll watch some of the other vids and let us know what you think. All the best....
Yes, its been a cold winter. If you want to see cold check out the Mossberg 930 review I did two weeks ago. About 18 degrees out. I am ready for spring! Please check out some of the other vids on the channel and let us know what you like. Also subscribe of you like what you see. Thanks for watching and commenting!
Thanks for the review I own and shoot a buckmark micro. I wish I had got the longer target barrel to start with now Im in the market for a barrel. What length do you prefer and would you buy a browning or tactical solutions? I have no need for a supressor or compensator so barrel threading is not necessary.
Like Lone Puma I prefer them to shoot a bit high out of the box. This generally makes for a better longer range weapon. Once I know how it shoots I can compensate on my own.
Love the guns. But you need to give the viewers more information. What length barrels? What exact models? Is the barrel/compensator the only mod? Is your pistol stock?
Thanks for the Reply!! I was thinking. Buckmark plus TS Barrel about $500 or more into a gun vs a Buckmark Camper Whisper at about $400 for a gun with threaded barrel. Or take your existing Buckmark $300ish and have it threaded $50 to $100+. Then you can customize it such as make the length shorter to keep most bulk pack ammo subsonic. Im sure the American consumer is all thinking about these decisions. Also the "slide" hitting the barrel makes a small amount of "action noise"
@@cody3078 The browning buckmark has an ejector rod (not the extractor)that needs to hit the spent casing just right to eject and not jam. Try bending it slightly to the left and up.
I think supressors should be totally legal if they want laws that prohibit silent guns? Put a minimum decibel level on them! Like motorvehile allowed sound only reversed ...you can put whatever muffler you want on a vehicle so long as the end result is being below the legal decibel level ...So would be the same thing backwards for firearms ...you can own any suppressor you want but just cant legally suppress beyond a certain point... Just assinine STUPID to outlaw causing a very loud firearm to become as quiet as another unsuppressed firearm ....which is the case today! A person can go to PRISON for muffling a firearm down to a more reasonable level...could STILL be louder than many other LEGAL to own and shoot firearms but you go to prison over some wording?? Is THAT insanity or wha?
Excellent demonstration / review. Thank-you...
Id keep the heavy barrel....The shots look way more stable. Nice chance to see both barrels!!
another one on my list of wants , browning makes excellent guns looks like a nice lil spot in the woods you found for some good plinking time
I just bought one, should pick it up in a couple of days.
I'm looking forward to MANY range days.
Good question. If you're planning to add a can at some point then this is a great way to do that as an add on. I didn't notice any difference in accuracy but the tactical solutions barrel is lighter and some folks like that.
Thank for the suggestion Much appreciated...I generally do more of an overview than a specific review of the gun specs. However, going forward I'll try to add more of the details. Yes, the barrel and comp are the only mods. Hope you'll watch some of the other vids and let us know what you think. All the best....
Yes, its been a cold winter. If you want to see cold check out the Mossberg 930 review I did two weeks ago. About 18 degrees out. I am ready for spring! Please check out some of the other vids on the channel and let us know what you like. Also subscribe of you like what you see. Thanks for watching and commenting!
Wow, that Federal is some filthy ammo.
Thanks for the review I own and shoot a buckmark micro. I wish I had got the longer target barrel to start with now Im in the market for a barrel. What length do you prefer and would you buy a browning or tactical solutions? I have no need for a supressor or compensator so barrel threading is not necessary.
What barrel length was the tac sol not counting the compensator?
Do you know much about the sporter rifle version?
Like Lone Puma I prefer them to shoot a bit high out of the box. This generally makes for a better longer range weapon. Once I know how it shoots I can compensate on my own.
Good feedback and suggestion! Many thanks...
I don't own a Mark 11 but will look for one to review. I did review the Mark 1 and the Ruger 22/45. Check them out!
Love the guns. But you need to give the viewers more information. What length barrels? What exact models? Is the barrel/compensator the only mod? Is your pistol stock?
Looks like a blaster from Starwars haha
I have the factory heavy barrel is it worth the expense in your opinion to buy the TS barrel?
Accuracy is about the same. The most noticeable difference will be a much lighter gun.
do you think the tatical solution's barrel and mods are worth the money?
I know its been a long time since the review but Which is more accurate the original barrel or the new tactical solutions?
+Dee Lee They seemed pretty close to me, but TS barrel allows you at add a can if you want.
Thanks for the Reply!!
I was thinking.
Buckmark plus TS Barrel about $500 or more into a gun vs a Buckmark Camper Whisper at about $400 for a gun with threaded barrel.
Or take your existing Buckmark $300ish and have it threaded $50 to $100+. Then you can customize it such as make the length shorter to keep most bulk pack ammo subsonic.
Im sure the American consumer is all thinking about these decisions. Also the "slide" hitting the barrel makes a small amount of "action noise"
I own this gun.
And?.....
I hate how mine keeps jamming. I bought a box of CCI because I heard it likes those rounds unlike Winchester etc
I bet I know why your buckmark is jamming
@@SUPERSLICEONEwhy?
@@cody3078
The browning buckmark has an ejector rod (not the extractor)that needs to hit the spent casing just right to eject and not jam. Try bending it slightly to the left and up.
You're all over the place, didn't see any accuracy drills. However, the buckmark looks good.
I exhale gunsmoke all the time when I shoot my ruger 22/45 .22lr.
How about you do a video on Ruger Mark II. ?
wow looks cold. you can see your breath in the air.
What's wrong with your left hand?
4 fingers
I think supressors should be totally legal if they want laws that prohibit silent guns? Put a minimum decibel level on them! Like motorvehile allowed sound only reversed ...you can put whatever muffler you want on a vehicle so long as the end result is being below the legal decibel level ...So would be the same thing backwards for firearms ...you can own any suppressor you want but just cant legally suppress beyond a certain point... Just assinine STUPID to outlaw causing a very loud firearm to become as quiet as another unsuppressed firearm ....which is the case today! A person can go to PRISON for muffling a firearm down to a more reasonable level...could STILL be louder than many other LEGAL to own and shoot firearms but you go to prison over some wording?? Is THAT insanity or wha?