Full STIHL Concrete Saw Rebuild in 9 minutes! Stihl TS 420 (Basically with three tools)
Vložit
- čas přidán 12. 09. 2024
- The Stihl TS 420 concrete saw ran without 2 stroke oil for 2 hours until the engine died. This timelapse shows all parts and many many hours of work in 10 minutes - enjoy!
Subscribe for more videos like this.
Music: Royalty Free Music from Bensound
Poor doggo don´t like no rain :-D
Thank you, quick and to the point, no annoying intro or anything. Right to the point!
Thanks
I love rebuilding these things. Ive used everything from chinese to genuine to aftermarket. My best work saw had a moly coated piston , touched up the cylinder and shaved it and ported the intake also. Running on 45:1 927 it ripped and sounded just as good as a dirt bike. Unfortunatly it blew up after 3 years of everyday cry cutting use. Ive rebuilt half a dozen since but nothing performed like that saw.. all it needed was a power pipe.
But i am here cause of a saw that has the most stubborn case halves ive seperated yet.
Great video, and thanks for sharing. The only comment is that, I'd personally perform a pressure and vacuum test once I'd installed the new crankshaft and cylinder. That way you know that you would know everything was good before spending time putting it all back together.
Thanks for the comment. Next time I get tools for the pressure test
Those are some tough old saws boy. She will run all day everyday faithfully just like the day you bought her.
Great video. Where do you buy your parts? Looking to rebuild two ts 420s.
There was a shop in Germany so it won't help much right?
Your the engine guru
Hey man can you do a carburetor adjustment video for the ts420 I would really appreciate It ✌🏾❤️
If I get to rebuild another one I do a carb adj. Video
@@bikedogtor1663 😂😂 I’ll send you mine LOL
*Excellent work, What do you charge for a ts420 rebuild like this?*
Thank you. I do it for free bc it's a hobby 😉
@Mylissa Chandelier Germany
i just rebuilt my ts 420 saw with all new kit everything and on startup it smoked but i thought maybe for the oil i put on the piston and rings and head not much i let it run for 20-30 min at idle for breakin and it smokes badly on the rev up .......took it back apart to check the rings and head all looks good comp test at 87 -90 no leakdown after 10 min what do you think could be the issue
Sounds like oil gas mixture too rich. What do you run? 1:50?
Da wird sich Teo Daub aber gefreut haben!
How the hell do you remember how to put it back together. The amount of stress this would cause me!!!
What do you think why I film everything 😝
@@bikedogtor1663 even so, doing it in reverse, id still mess up, respect
nice vid do you have a link to all the parts you replaced? chinese parts or stihl
No links but I used after market parts only. Stihl parts are three times the prize
@@bikedogtor1663 still running ok?
@@charlieparkes356 yes and all parts looked really good. Even the cheap cylinder, although it looked a bit different.
Hi how much has been cost you all the parts ?
I don't remember sry
Where did the black spring at 0.09 seconds come from?
I dont know.. But there is always one screw left over after every good project ;) Or a spring haha
Can i know the gas mixture ratio?
1:40 but check your manual
Can you do a ts800
If i get one maybe
Ts800 would be easier because they have the four bolts accessible from the top of the cylinder so you don't need to disassemble much.
Are you looking for a job? we are hiring.
Thanks I think my work is not professional at all 😄
💯💯💯👍👍👍🤝🤝🤝
Too rough with flywheel
You are right