✅ HOW to Cover PIPES With Drywall 🤜 Very EASY

🔥 How to MAKE a Drywall DRAWER to Hide a BLIND ✅ Metal Stud Framing
• 🔥 How to MAKE a Drywal...
Studs and channels for interior
Its composition is galvanized steel type DX51D and galvanized Z140 or Z275 that make up the framework of the load-bearing structure of partitions, cladding, shelves, shelves and drawers. The C-shaped profile that is installed in a vertical position and that fits inside the channel is called a stud. The U-shaped channels constitute the horizontal element that is fixed to the floor at the top and bottom. Both profiles have a knurled aspect that ensures the fit. The uprights have notches or H-shaped openings in their soul that facilitate the passage of installations, for example electricity, plumbing...
There are several sizes but the most used are the 48mm and 70mm uprights and channels.
The uprights, despite the fact that when we work we use the name 48 or 70, one thing to know is that they always have a millimeter less than the channel so that they fit well inside it. For example, the 48 is 46.8mm wide and the 70 is 68.8mm.
These profiles are also used for mounting ceilings, especially when you don't have many options to hang from the floor.
Plasterboard plates:
These plates are composed of a plaster core with additives and covered on both sides with a sheet of cellulose. Its manufacture is carried out through a continuous lamination process and according to the standard.
They have a visible face depending on the type of plate you need, it can be cream, green, pink, blue, yellow that allows any final finish. The hidden face usually has a brownish hue. To facilitate the treatment of joints, the longitudinal edges are tapered. The transverse edges are cut. But there is also a type of plate on the market that has all the sharpened edges.

[@mikapo1818]

Exactly what i needed, thanks

[@dignitas1980]

5:52 you can mud the drywall how many times you want, at that moment, you have to use metal sheet behind to "tie" these 2 pieces of drywall.

[@chentovich6436]

Me parece quedó perfecto con esas cantoneras,me imagino que después le debes dar una lijada fina y una mano de pintura verdad?

[@ricardohenrique5164]

so acho q faltou fazer os furos no rejunte

[@Maxik_Bartos]

👏👏👍

[@pineapplehouse69]

What are the metal bits called that the plaster is screwed to?

[@khazza930]

beading, corner beads, or angle beads

[@rodepperson5885]

Worst.video ive ever watched

[@omersert84]