How to BUILD your own ROLL CAGE!!! (LBDT Episode 15)
Vložit
- čas přidán 23. 04. 2020
- Let's build a roll cage! The Low Buck Diesel Truck is a labor of love. It's a slow moving project but well worth it. In today's video I'm going to build a roll cage and mount some new seats. While editing, I felt like I wasn't clear enough that these seats are sponsored products. Just to be clear, I sat in PRP seats at King of the Hammers and then contacted them about being a partner. Between the cage and the new seats, the Low Buck Diesel Truck is starting to feel like it might get done one day lol. Enjoy the video!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon!
/ dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#welding #fabrication #DIY - Auta a dopravní prostředky
that one bar with the 4 bends, we call that a 4 point saddle when we run conduit for electrical and we are going over some obstacle, and they are hard to keep straight! but if you make marks on each end of the tubing, it can help you keep it straight when you are bending, just as a tip I learned, and if there is a seam, like there is on EMT, you can also use that to help keep the bends straight. great video, Nate!
No way, this video couldn’t have been more perfectly timed. I just watched the previous episode on this truck last night and was bummed I didn’t get to see more.
Nice!
I’d love to see you do a custom e-brake setup on one of the rigs. Another thing they will tech you on.
Really happy to see you pick up this project again 👌
All right Nate! Been over 6 months.....need more Low Buck Diesel Truck!
Looking forward to more videos of the truck
Another great fab video Nate. Thanks again.
Great job man. I'm surprised that you didn't go with angle iron instead of flat bar for the seat mounts. It's probably fine, but angle should add more rigidity, keep it from flexing (even imperceptibly) in off camber situations and keep those welds healthy. Just 2 cents
Thanks for the tip about ERP seats as well 👍
Fellow plumber here, awesome seeing techniques from the trade applied in fabricating. Looking good man. To bad Ferguson can't screw up your orders now :/
Right now as the video comes to an end, I can see a great looking center console with dual cup holders
I don't use my seat slider to adjust length, but I do use it fairly often to access the open space behind the bottom of the seat. I also have a single cab and storage feels more valuable than gold as my daily.
Dude, your videos are TV quality type stuff! Everytime I come on CZcams I look at my notifications hoping you’ve uploaded a new video. Good up the good work man I love your content! And that’s fabrication!
Thank you! I'm pushing hard to get the best quality possible. 👍
Definitely keep this a low buck build. Not sure what you should build with the VW engine you have started. Maybe a full tube frame buggy or crawler.
your cinematography and editing are without equal! always enjoy watching your stuff!! now the comment, when you butt weld and slug the joint you should also put in a few plug welds. i know you know this, but it would be a good thing to mention to the "Dirt-bags".
Thank you for the suggestion man. I should have addressed this 👍
The best part about your channel is the broad scope of projects you do. Love it man.
LBDT baby!
You are killing the fab work 👌💯
Just watched the whole series. Hopefully we get an episode 16 soon
Love the style. Simple, practical and reliable.
Another great video. I love watching your fab work and ingenuity. Keep the videos coming, from someone stuck at home, Thank you!
It’s nice to see you’re keeping busy during the quarantine keep up the great work and keep passing The great information thank you.😎👍
Another great video Nate.
I’ve got a grand Cherokee and I am wanting to build it up and this roll cage just gave me inspiration and many great ideas
Nice intro Nate. You just keep getting better and better.
Thanks man 👍
Floor layout is rad! Building the cage just like at work. I'm a local 32 plumber and man it's rad to see another UA member doing stuff like this
Union strong brother 👊
Hey bro love your videos,I'm a yj owner living in San Diego and just wanted to say thanks for all the great tips from tools to easy steps on all the builds you have done to your jeep and your utility trailer . Hope to keep up with your projects as I'm learning from you alot just using them on yj
I’ve said it before, but I love your videos! I’m not even a Jeep guy, but the fabrication content is great. You make it look easy.
Thank you!
Awesome. Saving this for when it'll be needed.
Thx!
Love the roll cage dash creation idea...can’t wait to see it!!
Only found your channel recently and I REALLY respect your honesty, and your down to earth kind heartedness, I also really respect the effort you put in videographically, it’s SO easy to just thank on and finish a project and half ass the filming but you do both very well
Thank you very much! I appreciate you taking the time to give me a positive comment 👍
good to be back to this truck..keep em coming man..love your work
Another great video!!! Thanks Nate!!
One trick for welding the cage in the car/truck that I use since your doing plates is to drill or cut a hole just larger then the cage in the floor. Just set in the plates over the hole, bend and tac it all in, pull the plates drop the cage through the holes weld it up put the plates back and finish.
Awesome idea!
Top notch content. Thumbs up as always!
Great project! I enjoy all of your fab work. Those PRP seats look great and have a nice price as well!! I got my stickers in the mail I ordered today!! Now to decide where they will go on my Jeep
Nice work wish I had more time for my rigs . Love those seats nice that you can design them to how you want I might have to jump on that wagon cheers .
You make this very interesting to watch and you are certainly a skill fabricator.
Very nice. Love your work👍
Look’s great Nate!
Nice video! I'm excited to see how you build the door skins. I'm thinking about making some diamond deck ones for mine
Thanks for the vid this is my fav build of yours great bid as always
Good job and nice trikes to cage
Very creative sir. Cool video.
Awesome truck and roll cage set up, can't wait to see more of this build ...you're doing a phenomenal job man.🤙👍
Much appreciated buddy 👊
Loved seeing the #lowbuckdieseltruck back on the channel. Your production is getting so much better dude! My favorite video yet!
finally an update !!! Can't wait to see more !
Looks great, can’t wait for the rest!
Hi Nate in my sand car I did some hardened quick release pins just on the back seat tabs. That way if I need to get behind the seat I can pull the pins and tilt the seat forward. But anyways another great video!
I love the endless customization 👊
Man that truck is so awesome. Love what you’re doing to it and thank you for sharing.
Thank you for taking the time to post a positive comment 👍 I appreciate the support
Us Oregon coast jeepers really appreciate your content!
👊
Damn, your video production, editing, and cuts\music\audio is right up there with any cable DIY show. Think, HotRod TV, Trucks, Shadetree Mechanic, etc.... Nicely done Nate!
Thanks buddy 👊
I need to stop being lazy and build my cage. Keep up the killer videos. They help keep me going 🤘🏻
100k in less than a week! Exciting!!! Glad the channel is growing! Keep them Vids coming!
Thanks!
Great videos Nate!!
Like always awesome video and thanks for all the great info 👍🏼
Awesome videos man. I enjoy every single video of yours i watch. Tons of great information. I wish i could come hangout for a couple weeks and learn to fabricate lol One day though. Ill have my own shop and start my collection of tools
Great job sir ! Well informed and great content
YES FINALLY LOVE FOR THE LBDT!!!!!
Don't forget to weld in some "beverage" holders, can't have a offroad rig without at least 2 of them.
Your truck is coming out awesome good job.
Thank you!
hell yeah man ,Im pumped to see when the day comes of this thing ripping :D
Truck is looking great! Jealous of your skills.
Thanks brother 👊
One of these days I’ll have a project to build and go back through all of your videos to figure it out. 👍
Saw you doing layout on the floor, one trick I've used is the 3/4/5 method for squaring things up. Maybe you already know it, if not it's a neat trick you can look up. We use it in Feet for carpentry but it can be reduced down to inches as well.
You can even go for 6 8 10
Or 12 16 20 in inches, its easier to get more accuracy like that I've found
Badass! Such an artist
Nate! Perfect answer!
He is absolutely right🤘...XJ will destroy themselves.
I have been ordering parts slowly 😔 like 300$ bucks at a time...not cheap! Just on a budget 😁.
Front, middle and rear frame stiffeners , rock sliders, tie in brackets...and just ordered and waiting for a steering kit from dirtbound. CAN'T WAIT to start welding this month! ...then I will hopefully have the $$$ for a roll cage to tie it all in together😁😁😁
Oh ya...dirtbound has great stuff!
But the wait time sucks balls!
It's take's a month to get anything!
Rock sliders I ordered on the 12th...its the 5th of may and hasn't even shipped yet😔😔😔
i love the j10 project. it is going to be awesome.
Thank you!
Great job explaining things! Any chance you can do a video on technique for notching and welding tube. I'm learning to weld/fabricate, but finding the physical act of welding the coped tube joints difficult. Thanks! And keep doing what you're doing!
Good suggestion 👍
Wouldn't be a bad idea on the sleeves to drill 2 holes on either of the outer tubes and add some plug welds. Think you will add any tube along the front of the roof, and/or add the vertical tube in the windshield?
Looks good nice work sir !
Awesome Nate!
Like the new intro!
Thanks!
Great work. Teach me your ways wise one...
Lol
The only reason I would ever move to Utah is to be this guy's neighbor.
I wonder if he would like to vacation in Florida and hang out at my shop every now and then 😂🤣
Bad Ass Truck! Love it!
I know I'm late to the party...
Had some questions:
I thought 90° terminations needed gussets? 45° on both sides. That prevents shearing and push. Also provides you with a place to weld triangle sheet with dimple dies (which we all love). An A in the windshield looks cool and keeps the roof from folding the A pillars in a roll over. A V from top center windshield to the center floor bar and back up to rear center halo would keep you nearly crush proof.
These might be WRC specs, but you are off road...
I need the exact same cage for my J200 Custom Cab Gladiator project. So if you could bend up 1 more of everything for me that would be great. I will chip in for tube and shipping. ;-)
Nice work!
Great fab work !
I feel like you wouldn’t have dogged that 4 bend saddle! Another badass video man!
Love the gladiator builds
Do you plan on adding door bars? I think you could pull off some low door bars with a bend that kinda follow the seat lines... would add a lot of extra strength to the cage and make it look more complete/professional for the look you're going for. Either way, sick cage! My comanche will one day be caged
Looking good... didn't expect anything less, your work and programs are all top shelf. Couple questions... are you going to install any gussets in the corners ? Are you going to come up and out from the frame to the bottom legs of the cage ? Are you going to install one or two bars, in the center of the roof. Tying the front bar and rear bar together ? Rollcages should be as good looking as they are functional.
You have a great skill set.
looks really cool man!
Could you make a video on how to buy a used jeep? I have one (tecnicaly my dads) but I would like another one/trail beater when I'm older and have more money.
I actually have this on the video list. I will get to it one day for sure 👍
@@DirtLifestyle thanks.
Davey's Jeeps, Salem Ohio.
Just started following you. Great videos! Would you have a link to the level that you are using on your bender? A tip from someone that uses a blue wrench a few times a day, cover everything, especially glass,body parts & those brand new seats. You will have small pits on all of it,from your grinding to welding it will be everywhere.Just my .02.
This truck is going from "work truck" to something much more extreme real quick lol
My seat belts messed up in my tacoma and the replacements cost as much as aftermarket 5points so i wanna see how you do yours to give me an idea on how to do it. nice!
I've seriously missed the LBDT
Also since everytging you build is so nice and well done its o ly fair you fix the rust to make the rest of the truck as good as the motor/cage/ bumpers/ body armor...
I'm not interested in doing a full restore on this truck. Any rust, dents and scratches will remain. Adds character
To be honest, your philosophy of building as you go and letting the brain fill in the blanks and head off the problems is my kinda way of doing things too.
This video was perfectly timed, I really want to put a roll bar/cage in my Porsche
They make a kit for Porsche just Google it I wouldn't go welding and fabing like this is in a bad ass Porsche but if its a boxster go for it
Great work! Looking forward to seeing what you do with this truck. One question is there a reason you didn't add a bar above the windshield? I get that this is cage is more of a style choice but I would consider adding that bar for strength, and would also work well if you wanted to add any switches or mounts up high. Just a thought, keep up the good work!
I want to keep the visors and to do that I would have had to locate the tube really low. Everything changes when you don't have a flat windshield like on the wrangler lol. It make little details like this more difficult
Nice to watch your contents, I enjoy it..
is it necessary to weld the whole cage into the chassis? for saftey ? in case of a rollover?
greetings from Saudi Arabia
Is tying the roll cage to the hoop a good idea? It would probably stiffen everything up, but you need to cut the holes in the cab... on the other hand, if it was a good idea it would be more common.
I was thinking about the ways of cheating with the paint. Maybe bend the tubing, cut to fit, take it out, paint it (lave a few inches around the weld area) and then weld it together in the truck, so you end up with only small areas to paint around the welds.
Good work
Want to build my suspension system and put the tons under my jeep lol I wont have the time and nobody can get to it until winter here and we are down to one vehicle again...this quarantine is getting rough lol
Absolutely great video. I wish I lived near you. I would gladly employ you to build my cage
That is a nice tube bender. I see you have the deluxe return springs.
I am surprised you bent the tube that meets the cowl so it installs flat. Did you consider angling the two bends you put in it at the ends down slightly? See 6:14. Don't get me wrong, it looks good and you do great work and maybe you were just sick of messing with that tube.