Video není dostupné.
Omlouváme se.
Sata X5500 HVLP v Meiji Finer Core 1.3 HVLP For Basecoat (Exodus Luma)
Komentáře • 50
Další v pořadí
Automatické přehrávání
Самый полный тест SATA 5500 HVLP RP дюзы I и OКрасим правильно
zhlédnutí 32K
Краскопульты Meiji FINER СORE [покраска авто].КУЗОВНОЙ РЕМОНТ АВТО НАИЗНАНКУ
zhlédnutí 18K
Ntools NVE 1.3 v YT160 1.3 For Base Coat, Based On Devilbiss DV1 and Iwata W400Pete's Hobbies
zhlédnutí 1,6K
Hojení bodné rány nožem při carnivor stravě | Očima vojáka speciálních sil | #mscrewpodcast #podcastMichal Šopor
zhlédnutí 166K
Cool barbie shoes! #shoes #makeover #diy #upcycling #handmadeLa La Laugh! Shorts
zhlédnutí 3,5M
Wait for the BOWLING BALL! 👀Josh Horton
zhlédnutí 54M
Rybičky48 - Já dneska slavím feat. MilfkiRybičky 48
zhlédnutí 232K
обзор, сравнение walcom carbonio hte baseМалярка. АлександрПалажник
zhlédnutí 1,7K
How to Set Up A Paint GunJ.Lulo
zhlédnutí 21K
Meiji F410 SP1.4,An Iwata W400 or LPH400 Right?, Wrong, It's DifferentPete's Hobbies
zhlédnutí 4K
SATA RP 5500 X VS Devilbiss DV1 My Honest ReviewMurder The Finish
zhlédnutí 1,4K
The PERFECT lvlp spray gun to paint your car at home.Garage Noise
zhlédnutí 153K
Revisión y demostración del nuevo Meiji Finer-core 1.3PHARRAWAY
zhlédnutí 3,5K
SATA Vs WALCOM: How do spray guns compare.Paul Phillips Paintwork
zhlédnutí 19K
Как красит японский краскопульт meiji Finer Core? Выбор краскопульта для покраски авто своими рукамиКрасим правильно
zhlédnutí 15K
Painting BMW M4 | Sata X 5500 RP 1.3 I , X 5500 RP 1.2 OColoroN Car PainteR
zhlédnutí 145K
Attack a Terezka jdou na rande… KINOAttackShorts
zhlédnutí 441K
Ženu pronásleduje vrah #horrorshorts #shorthorrorstory #shorthorrorstoriesPrézovy noční můry
zhlédnutí 217K
Oznámenie zásnubMATT Zrebny
zhlédnutí 237K
Joker can't swim!#joker #shortsUntitled Joker
zhlédnutí 35M
Co divného umíš ty? 😝Tary
zhlédnutí 228K
Virální legendy potřetí: Finální zúčtování! | KOVYKovy
zhlédnutí 205K
What a great finish pete very well explained thanks for sharing that pete comes down to cost 👍
Hi Andy, thanks mate, much appreciated 👍
Here in the US, it's all about the EPA's attempt to reduce overspray, but HVLP tends to be too air hungry for most at home. You really need a beefy compressor to run one for completes. Luckily, only shops are required to use HVLP. DIYers, can use whatever though we're only "allowed' to paint 2-3 cars per year. Still, those are nice guns.
Good comparison, Pete!
Hi Boss, You are, of course, right in what you say. The Sata consumption is around 16.5cfm, which is quite demanding for most home setups. Thanks for watching mate, it's always much appreciated 👍
Nice comparison Pete both put out lovely finishes it all boils down to the retail cost well done bud 👏👏
Thanks Dean, these are both really good base coat guns and a joy to use.
If someone was given these two with no knowledge of prices and was asked to pick the one that was twice the price of the other, purely by look, feel and quality most if not all would pick the Meiji as the most expensive, I'm sure of that, cheers mate as always 👍
@@peteshobbies5383 Any joy on the 430 air cap , so looking forward to your review on the hd advance???
@deanbrown7643 Got the cap ok, really good condition as well, haven't had a chance to try it yet mate, re landscaping the back of the garden at the moment so limited time, in fact I just laying some slabs as we speak 😀
@@peteshobbies5383 🤣🤣🤣🤣🤣🤣 have fun mukka enjoy did mine last week 👍👍
@deanbrown7643 Oh really, that's a coincidence 😃, won't be long before it is all done , cheers mate 👍
Excellent comparison, when I used the Meiji for the first time, I thought it was fast. You mentioned to me that the Sata is a bit faster. From what I saw, a bit faster, but had more overspray. I would now have to wonder with a big job, saving time, or materials, which is more important? Thank you Sir, pretty work
Hi Bryan, the Sata is just a little bit more of everything. The Meiji is a lovely tool, and most people looking and handling it would assume it's the more expensive gun , thanks for watching mate. Much appreciate 👍
The only thing that has prevented me from ordering a Sata is the price tag. It’s like buying a car for a price of a truck.
Hi buddy, Their prices are high, although it really does depend on where you are as to how expensive they are compared to the opposition.
It would be understandable if they were superior in performance or build quality, but they aren't IMO.
They are , I'm told, good in a production setting where they have lots of heavy use, I can't vouch for that as I'm not in that setting but I just can't see it, for example here, the Meiji is definitely the better made gun.
Thanks for watching mate👍
Hey Pete. So I decided to buy the Finer Core 1.5 gun only. I really thought the cups for the FLG5 and ProLite would fit. That's not the case.
Is there an aftermarket cup I can use or do I have to buy the Meiji cup? Thanks.
Hi Mate, the Meiji is a 3/8"BSP thread, the same as the Devilbiss FLG5 or Pro Lite, I use my Devilbiss cups on the Meiji, I have a Meiji cup because I wanted one but I have never used it, I wonder why its not fitting?
@@peteshobbies5383 The end (the unthreaded part after the threads that butts to the inside of the gun when cup is screwed on) seems to be too long. That, or the female end on the gun is too short. I will send links to the pictures or a single video showing what I have going on.
Yeah, send me something on Instagram if you're on it. That's the best way to get a video over to me
Pete did you use a 1.5 or a 1.3 meiji
Hi Andy, it was 1.3 mate
Hey Pete where did you get the cup for the meiji gun? What size is it?
Hi Ken, It's 100ml, the Meiji is the same thread as Tekna Gti Pro Lite, here's the link 😀
www.ebay.co.uk/itm/125423325848?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ECrBiOqaRCW&sssrc=4429486&ssuid=v5EZyL9iR9-&var=&widget_ver=artemis&media=COPY
Pete, which other manufactures cups fit the Final Core? I have a lot of guns and I'd like to avoid buying another cup if I already have one that would work with the Final Core.Thanks.
Hi buddy, it's the same thread as the Devilbiss Tekna Pro Lite, ANI F200 Black, F160 , so 3/8" BSP male
Thanks Pete!
@@satamanschmidt3428 Your most welcome 👍
Hello. If you use 2k paints how do you deal with the fumes from your small area and also what sort of face mask do you use. Thanks.
Hi buddy, I have a Devilbiss 650 air fed mask, but I don't use it often, I normally use a Moldex mask with 2 filters.
I don't have any ventilators filtering the air in only the air out, this is just two 700mm square boxes made of wood with a 600mm extraction fan inside, these vent outside through 100mm filter media that I buy in rolls,
@@peteshobbies5383 Thank you for the reply.
@larropowell3658 You're welcome, buddy 👍
Pete, I saw some time ago that Sata kind of "cheats". They exaggerate the tip size to a smaller number. Their 1.3 is actually about 1.45mm, so really the Mejii in 1.5 would be a closer comparison to the Sata in "1.3".
Hi Ken, Yes, I've heard that as well, that would also explain the high output of most Sata's 😀
@@peteshobbies5383asked a sata rep about this he wasn’t too pleased about me asking and he responded through his teeth “okay yeah we do that but it’s engineered to spray as a 1.3”
Actualy a got sata 1500B 1.3, sata 5500RP 1.3 I and sata CC 1.3 but are all with actuly diffrent nozzle diameter. 5500 rp is the largest nexr is the CC and the smaller one is the 1500B. I don't know what this 1.3 actualy means. Regards( i have devilbiss gti pro lite with 1.2 amd 1.3 the 1.3 maybe corespond to the 1500b 1.3this is not messured but just by the eye)
I have the 1.3 CC, and it's actually 1.15mm in tip size. The 1.3 RP is 1.35mm, this may interest you,
czcams.com/video/d78ps1GARsw/video.html
@@peteshobbies5383 Hi i watched your video about CC this explayins a lot for me. I wondered why i feel the gun slower with the same clear that i usualy use. I knew it that there is something wrong, but i was thinking that is slower because from the fan actualybecause is I but now know. Allways is better to use messuring tools but i dont have them the eye sometimes is not sow accurat. Now i know something new many thanks about your answer. I will follow you, there is allways something new to learn. Regards
Hi Pete, another enjoyable video mate but how very dare you compare my wonderful Sata X5500 to a tractor😱you can soon go off people can't you😈😏🤣😉You are correct of course, while I like my Sata I don't think it's any better made than my WS400 it's probably as good but I don't buy into what people are saying that the Sata is the best made gun out there🤔
Both the Meiji and the Sata laid the base really well and as you say the Sata is a bit faster plus it has a bigger fan but I prefer the look of the Meiji and at the price it's a nice gun which I'm still hoping to own one of these days🤞😁
Thanks Pete👍 I hope to post a video today of the R500 which I used for the WoW, base and clearcoat😎
Hi John, I was saying to someone earlier that if you just gave people the two guns and said one was twice the price of the other, most people would say the Meiji was the expensive one.
I'm off to Instagram after catching up on here, mate, so I will have a look 👌 👍
Yeah exactly mate as the Meiji is by far the better looking gun and just looking at it it also looks more refined. I was wondering if you were ok mate as it's unlike you to be this late on here but I wondered if you were knackered if you are still working on your garden unless of course you are sitting by the pool somewhere nicer😎☀
@JohnWD40TC02 Thanks John, yes a bit under the weather mate, think I genuinely have the flu, feeling awful, had to stop slab laying in the garden, just no energy then zonked out all afternoon, In bed now so hopefully it will pass, feeling like I've been hit by a bus 🤣🫣
Sorry to hear you aren't feeling to good Pete, lets hope it's one of the 24 hour bugs so it soon buggers off😁 you need to mind those buses mate if one hits you, you might damage it🥴🤕😉sleep well buddy👍
@JohnWD40TC02 Cheers, John, it's certainly not a 24-hour thing as it started a week ago 🙄, Hopefully, it'll be gone soon, 👍
Junk
Hi buddy, What is ?
Even if the Sata was less money, I'd still be the Finer Core.
I think I would agree, I know many love there Sata's but they are overpriced and aren't as well made as the Meiji.
They are very different, though. The Meiji is small and light. The Sata is much heavier and much bigger, bigger than virtually any other gravity guns