【TAIWAN T-N.T. STUDIO】KWA/KSC - MP9/TP9 GBB Retrofit kit introduction
Vložit
- čas přidán 17. 12. 2016
- 【TAIWAN T-N.T. STUDIO】KSC-MP9/TP9 FULL HOP-UP RETROFIT KIT V1
●Introduction：www.taiwangaote.com/ksc-mp9-gb...
零附件內容：
●T-N.T. T-HOP 膠皮 for KSC-MP9 x1
●T-N.T. 精密雙內徑氣墊內管 x1 (143mm/275mm/345mm/370mm)
●HOP-UP chamber for KSC-MP9 x1, O環 x1
CNC 鋼製調整環 x1
機米螺絲 (固定內管) x2
●鋁製CNC鋁製外管 x1、機米螺絲 (固定外管用) x1
----------------------------------------------------------------------------
《TAIWAN T-N.T. STUDIO》for KSC-MP9/TP9 GBB Retrofit kit.
Contents：
●T-N.T. T-HOP bucking for KSC-MP9 x1
●T-N.T. Precision Air-cushion inner barrel x1 (143mm/275mm/345mm/370mm)
●HOP-UP chamber for KSC-MP9 x1, O-ring
CNC steel adjustment ring x1
jimi screw x2
●Aluminum CNC outer barrel x1、jimi screw x1
----------------------------------------------------------------------------
【TAIWAN T-N.T. STUDIO】
●Official website:
www.taiwangaote.com/
●FaceBook :
/ tnt.studio.tw
●Instagram : _tnt_studio
/ _tnt_studio
○Purchasing methods :
if want to buy any product, or any questions, please pm to our FB ☺ - Jak na to + styl
![[SUB] KSC MP9 GBB Disassembly & Nozzle Replacement](/img/n.gif)
非常用心廠商 貼心的作品 馬上去買 支持
小林 感謝感謝
Looks excellent, the only thing making me want another KWA
Thank you ;)
最近準備入手
I alrreade bought one in jkarmyshop :D!!! Hoping this works great on my mp9!!!
Andrew Rodrix thanks for your support.
Looks Great!
Is the KSC MP9 the same model like the KWA MP9, or in other words, will this fit in the KWA MP9?
Same, thanks
@@TAIWANTNTSTUDIO so does the retrofit kit work in a kwa mp9?
@@MatchaMax of course, thanks
but would you really recommend this kit? and with this kit can you put any cannon on it or it has to be a cannon specifically for the MP9?
Sorry, I'm not sure the "cannon" what you mean... but if you are not satisfied with the existing performance of your KSC-MP9, we recommend you can give it a try, thanks :)
@@TAIWANTNTSTUDIO thank you and don't worry about the cannon was just a doubt, since my friend wants to buy this Kit for his MP9 I carry a VFC so all this research is for him, thank you very much for answering.❤️
Can't wait just ordered, at the end of the video what's range you shooting at?
The distance between where we stand and the green wall at the end is about 70m, and thanks for your support!! :)
@@TAIWANTNTSTUDIO very impressive ,thank you for fast reply. 🙏definitely will do a review on this product.
@@Tactikool_Stuff Thank you!! :D
This looks good, can you use any rubber and barrel with this ?
Hello, our MP9 retrofit kit have our own rubber, but you can using any GBB barrel on it, thank you.
JACKIE CHAU thanks, anywhere you recommend buying from?
@@matthewjohnson8483 Hello, if want to purchase any T-N.T. products, please PM to our Facebook fans page : facebook.com/TNT.studio.tw/ , thank you.
I want to buy this, but there are 2 lenghs that i see, the 275mm and 370mm, if i have the angrygun supressor, and i want the longest posible barrel without it sticking outside the silencer, wich measument should i buy?
Thanks.
Hello, we have MP9 345mm retrofit kit for suppressor, but if the suppressor have inner barrel inside, you will need to remove the inner barrel before install MP9 retrofit kit, thank you.
@@TAIWANTNTSTUDIO thank you!
@@TAIWANTNTSTUDIO sorry to bother again, what webpage sells it ???
Hello I just got my tnt kit for the mp9 and im trying to assemble it but the pin at the top will not line up with the indentation on the outer barrel, I have tried to assemble it multiple times, but the indentation on the outer barrel goes past the are where the pin has to go, any help?
Hello, here's some installation tip for reference : 1. Please trying push the whole kit to the rear side when you going to install the top pin. 2. Please release the side screw on outer barrel then push the whole kit to the rear, trying install the top pin and lock the outer barrel screw. Installing the MP9 kit is not difficult, but there are small places that require a little skill, hope this can helps you solve the issues, thank you :)
@@TAIWANTNTSTUDIO I got it to work in the end, the problem was that the notch that makes the bbs go into the hop up unit (the one that is on the bolt lock) was a bit too big and I had to force it into the little hole that is just at the entrance of the tnt kit. It is a bit hard to explain but I got it working in the end (even though I had to sand a bit of the metal off for it to fit correctly), thanks a lot anyways!!!! :)
Nice, but wow! 140USD , is this CNC 7075 ?
Five axis CNC 6061.thanks.
stock hop up bucking does overhop in bbs weight allowed in spain, any bucking avaiable for lightier bbs, or we can use original MP9 bucking?
Hello, did you installed this mp9 retrofit kit? or just using stock setting?
@@TAIWANTNTSTUDIO yes, I have installed the retrofit kit,but in lower hop adjustment it creates a lot of overhop with 0.30bbs
with stock hop unit I can regulate hop properly
@@Funkertruppen Did you trying to decrease the HOP-UP? but the 0.3g BBs is really too lighter... Because the T-HOP bucking have more better friction efficiency so the lighter BBs is easy to over hop, so we will recommend customer using some heavier BBs to get the best performance :)
@@TAIWANTNTSTUDIO the problem is cause we have bb weight limit in primary assault replicas to 0.30
even with zero hop setting it overhops the bb
@@Funkertruppen Maybe you can trying to shorter the nub to 2.2mm (using sand paper).
可以用馬記手槍/VSR10/WE hop up 膠皮嗎?
您好，本套組所使用的HOP膠皮很類似馬記規格，但因需要考量上彈位置，所以仍與馬記VSR規格有些許不同，但我們也有販售套件專用膠皮，後勤補給方面沒問題的，謝謝～
Where can I buy this kit in EU? Have you any reseller in EU which it has in stock?
maybe we will cooperation with Gunfire in near future, so maybe you can trying to contact them.
@@TAIWANTNTSTUDIO great. thank you :)
I lost small adjusting screw which is in 9:48 - 9:54. Can you tell me dimensions of it, please? I will try found spare one on the internet.
M3 screws.
@@TAIWANTNTSTUDIO Thank you
what's the diameter of the inner barrel, 8,50mm like VSR barrel ? Ty :)
Hi, yes the inner barrel is 8.5mm like VSR barrel, common specification, thank you :)
Perfect, so
I need this :) ty
www.taiwangaote.com/retrofit-kit2.html
will it be a problem if i install angry gun powerup silencer?
Hello, we recommend using a 340mm inner barrel to avoid misalignment issues.🙂
Can you adjust the hop-up without removing the top cover?
Hello, according to the original design, if you want to adjust the HOP-UP must remove the top cover, but we know some clients will drill a hole on top cover to quick adjust the HOP-UP, just for reference, thank you :)
您好，我的MP9沒連發了，是什麼事問題？
您好，可能零件損壞而導致作動不正常，建議可以直接送修，謝謝
裝金色管 外殼回裝後也看不出來啊⋯⋯
槍口看的到啊～側邊拉開也會...這是感受與視覺的問題^^
何謂一般通用內管呢~?
您好，『通用規格內管』的定義是：可安裝於AEG、長/短GBB，或是某些狙擊槍型號上...都可共用的內管就是通用規格，謝謝^^
Hi..please leave a message to me, thank you.
facebook.com/tnt.chau