Small washer is for the bottom connection..If you check it looks like a cone there. That's where the copper ring sets, sometimes old ones are stuck from the olde filter when removed.
Thank you for telling me how to depressurize the fuel tank. It may be obvious to some folks, but I am not one of them. Another video mentioned the need for this but did not explain how, so I was glad you did.
Good question. Usally around 50k depending on the driving and what type of gas is put in, cheap gas will have a lot of particles, hint:don’t let your gas get to low because fuel pump well pump up the little debris left on the bottom of the tank
Try to find where -be careful because the threads they’re really easy to strip, especially from the hard line -what some people like to do on the threads is put Teflon tape if it’s not sealing right, but do it at your own risk it’s not recommended but that’s what some people do for last resort. Good luck
Small washer is for the bottom connection..If you check it looks like a cone there. That's where the copper ring sets, sometimes old ones are stuck from the olde filter when removed.
Thank you for telling me how to depressurize the fuel tank. It may be obvious to some folks, but I am not one of them. Another video mentioned the need for this but did not explain how, so I was glad you did.
Torque specs are 25 lbs/ft. Thanks for the video.
Full of great tips, thank you!
needed this. thanks bro
I had a 98 Civic changed it it was soo easy
Great video. Thanks for showing the tools needed. Appreciate it
Thank you :), will be making more soon
Very helpful. Will doing this on my 96 hatch. Mine was leaking from the top haha
Hell yea bro 🔥🔥🔥 content keep up the hard work 💯
Thank you 👌🏼
By any chance have u changed an oil filter for a civic 2012 or where it’s at bec I can’t find no viedos on that
No sir sorry
Can u recommend where u got your filter
I used a autozone filter and had to return it . Would not seat properly with the washers
FF696DL is the part number and it is from autozone, at 0:20 you can kinda see the box sorry 😅
autozone and advance both leaked on me/i used the supplied washers
gonna try a oem from honda, any suggestions what went wrong?
both from the top/waiting on oem, tried putting old one back-leaks but very small/while I wait for oem
@@grockindabuilding4744 it sounds like its not the rings but where its sitting might have a bad threads, if the threads are bad you need teflon tape
its that your car is vtec?
How often should the filter be change?
Good question. Usally around 50k depending on the driving and what type of gas is put in, cheap gas will have a lot of particles, hint:don’t let your gas get to low because fuel pump well pump up the little debris left on the bottom of the tank
mine keeps leaking when i prime the fuel pump
Try to find where
-be careful because the threads they’re really easy to strip, especially from the hard line
-what some people like to do on the threads is put Teflon tape if it’s not sealing right, but do it at your own risk it’s not recommended but that’s what some people do for last resort. Good luck