How To Rebuild And Install A Pool Pump Motor
Vložit
- čas přidán 27. 07. 2017
- amzn.to/2uEJnQQ A.O. Smith 1HP Motor
amzn.to/2H1eDhD Hayward Pool Pump Gasket Kit
amzn.to/2uasYFg 6203 Bearing for motors
amzn.to/2uaoWg0 Bearing puller set
amzn.to/2wrMCcB A.O. Smith 1.5HP Motor Replacement
amzn.to/2uEJnQQ A.O. Smith 1HP Motor Replacement
Variable Speed Pumps
amzn.to/2veaPGJ Variable speed Pentair Pool Pump
amzn.to/2uIWFdB Variable Speed Hayward Pool Pump
Salt Water Cells
amzn.to/2uEIxnq Hayward Salt Water Cell 40K Gallon
amzn.to/2v3JZAy Circupool Salt Water Generator 40K Gallon
amzn.to/2eTFF0p 1/2 HP Impeller
amzn.to/2eTaJNV Impeller Ring
amzn.to/2uEJY52 Diffuser O Ring
amzn.to/2eTzRnz Shaft Seal Assembly
amzn.to/2u4ndUS Pump Housing O Ring
Variable Speed Pumps
amzn.to/2veaPGJ Variable speed Pentair Pool Pump
amzn.to/2uIWFdB Variable Speed Hayward Pool Pump
Salt Water Cells
amzn.to/2uEIxnq Hayward Salt Water Cell 40K Gallon
amzn.to/2v3JZAy Circupool Salt Water Generator 40K Gallon
TroublefreePool Website
www.troublefreepool.com/conte...
In this video, I change a 2HP pool pump motor to a 1HP pump motor to create less noise and to save money on energy costs.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.
amzn.to/2H1eDhD Hayward Pool Pump Gasket Kit
amzn.to/2uasYFg 6203 Bearing for motors
amzn.to/2uaoWg0 Bearing puller set
amzn.to/2wrMCcB A.O. Smith 1.5HP Motor Replacement
amzn.to/2uEJnQQ A.O. Smith 1HP Motor Replacement
Variable Speed Pumps
amzn.to/2veaPGJ Variable speed Pentair Pool Pump
amzn.to/2uIWFdB Variable Speed Hayward Pool Pump
Salt Water Cells
amzn.to/2uEIxnq Hayward Salt Water Cell 40K Gallon
amzn.to/2v3JZAy Circupool Salt Water Generator 40K Gallon
Thanks for the clear and well paced video. A safety reminder is that the starting capacitor can be charged up and waiting to give you a good zapp. It may not kill you but the shock can jerk your body to hit something you'd rather not be hitting. You're wearing rubber gloves, so you're good.
The voice over added to the video is great.
Thanks, I'm working on my narration skills.
I noticed that the mentioned bolt left handed thread aka reverse threads was not installed during reassembling?
Very nice, Bob. I'm looking forward to the pump motor rebuild too. Emerson is an old, well-known electric motor that, if memory serves, were on all of Sears' belt driven (and maybe direct drive) table saws.
The rebuild is on the way. I have the motor torn down and the parts on the way. The hardest part was getting the bearings off, but I got it done. Emerson motors look like they have been replaced by US Motors Corp. but from what I heard all the newer high efficiency motors preform well and no brands are really duds.
Another great video as always. Thanks for putting in the time.
No problem, thanks for taking the time to comment it really helps the video. Bob
Can you take a pool pump motor and convert it to regular electrical motor use like on a band saw or wood lathe?
Great job as usual
Thanks Ronald, I appreciate that.
Fantastic video. I wish I was good at shit like this 😢
Shaft seal only needs to be hand tight. By using a strap wrench you stand a good chance of cracking the ceramic on the seal.
Yep, and the ceramic seal should be spotless clean without any lube or grease.
I see you rebuilt the pool pump itself. From the title I thought you were rebuilding the pool pump motor. Nice work though.
Nice work Bob . I take it the old motor used a lot of juice off the mains.
Cheers Pete.
Pete Froud
The old motor was getting loud and running hot. I'm in the process of replacing the motor bearings on the old one, just waiting on parts.
Nice watch
Don't you check shaft for wear?
🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼
Are these beer mugs?
Salt water to generate chlorine???????????????????
Yes, John the water is 2500ppm salt (ocean water is 35,000ppm salt) you can't tell it is salt water when swimming. The chlorine generator uses electricity to convert the salt water to chlorine. Once the chlorine is used up in the pool it returns back into salt water.
lube on the shaft seal is a no no !!
I was told to only use liquid soap ???
Don't use sealant on the rubber seal plate side, use lube. Don't use lube on the shaft seal itself at all. I do this for a living.
I thought you were taking apart the motor. Your title is misleading
Maybe rename this video to "How To Replace and Install A Pool Pump Motor". You did not rebuild anything, you repaced.
You shouldn't be making videos like this if you don't know the difference between a pump and a motor.
never user pb blaster on a pump/ dont use rdv clown
dont try this on junk motors waste of money