true story from my personal experience. At my wedding, my wife got both photographers and videographers to transfer out the RAW footage to our own device, so this would not happen :)
Photogs 'round here always refuse to do that. Never understood why since you pay in advance anyway. Saying no to a data recovery guy like you would certainly change the tone of the conversation :) and likely be a deal breaker.
As long as the tweezer is good straight and not gunked up with flux, it's a great thickness. Not too flimsy and burns off fast for tinning. Rest is practice 😄
I will never tire of watching you work your magic Erkin. Thankyou for having such an open attitude to your knowledge, you truly are a master of your art
You have amazing hand skills but your knowledge in digital logic is even more impressive. One of my two favorite repair channel on Yt, the second being Northridgefix. Please continue to give us quality content like this. 👏👏👏
Always fascinating, owner of the card from going from nothing to virtually complete intact recovery am sure is thanking his lucky stars for your skills.
I gotta start getting consent from clients to post their emotions on the other side of the phone after the job is finished. It's hard to explain, but it feels like you just rescued their pet from a burning building 😀
Man, everytime i see new a video i seen something new, your skills are amazing in soldering and knowledge, i know this micro soldering is very hard with good equipment but for this kind of job you need skills, you explain every details and help people to recover data from such devices. This channel is underrated and need to grow, i know we need good tools for this but without skills you can't advance. Keep up the good things, i hope to put a track like you do on the beginning, i watch every video from you everytime.
it's wild seeing the architecture of the data and sector layouts ...of all the brand types and formats ...where does one go to learn just the basics of that ...and has data recovery become more afforable for the customer ..all i was seeing was 4 figure quotes ..and that was concerning ...or has this type of service been more accessable to everyday off the street customers ..i dig the videos :)
tool vendors like Acelab and Rusolut offer training for their equipment. Data recovery pricing probably did come down a fair bit since mid 2000s when I just started. We used to charge 2-3K for just imaging the drive at my first job. chip off recovery here (for the most part) 300-900 range unless pinout development is needed, XRAY and stuff like that
That bit rot can too happen due camera writing process or sd card i/o error while in usage. You cannot restore those ever, only fine tunbe by hand back most liekly back close to original but not ever original.
You see, only one bank out of 8 had them, so am keen to think it was an issue internal to the individual crystal. I/I errors during use would probably be consistent among other CEs also
Since you said comment what I want... I will take this opportunity to say one of the most controversial things ever.... I think we need to delete from existence mint chocolate chip ice cream. It is a disgusting tragic loss of cream and chocolate.
If the flash controller is damaged, can I solder the nand pins from the damaged cars to an exemplar card and have it work? I don't have a PC-3000 Flash
good question. If you know what controller is used them, and how to disable original controller then yeah. This case is a proof of concept czcams.com/video/0nV2ifn0o7k/video.htmlfeature=shared
The recoverability is great, chips are usually micron or spactek which read amazingly clean. Starting Lexar project usually ends with success with very little room for failure
are you still able to recover a drive if it has been full disk encrypted, or do you need the clear data in order to verify your success? linux full disk encryption? like dm-crypt.
I have several questions if you can answer How much do you charge for this job ? where do u find schematics for each card maker to know were each test point should go ? Can PC-3000 recover data from USB made by MacBook (or any other Apple computer) ?
We develop schematics that are not provided by vendors if clients are willing to pay for the work. It's expensive labor. I will post the process in future, I have filmed a few cases for pinout development. Rusolut and Acelab give their clients access to their members only schematics. Over the years both vendors had built an impressive amount of schematics. We also have telegram and WhatsApp groups for close knit data recovery fellas who share these if someone needs them
Funny that u don’t work on all micro jobs for the highest price like GPUs and shit u have the skills I’d do what makes the most but I guess data is based on parts but the importance of it so u could charge what ever
GPU has top cost because it's replaceable. If the price of my services exceeds the cost of replacement then I would not get the gig. Data is not replaceable, therefore the price is subjective to the owner of the device. Getting data back is very expensive
true story from my personal experience. At my wedding, my wife got both photographers and videographers to transfer out the RAW footage to our own device, so this would not happen :)
I'm sure your wife appreciates your experience
Photogs 'round here always refuse to do that. Never understood why since you pay in advance anyway. Saying no to a data recovery guy like you would certainly change the tone of the conversation :) and likely be a deal breaker.
Your depth of knowledge and experience working on these devices is truly impressive - well done!
Thank you!
Dang, the work that you do with those 0.04mm wires is *amazing*. You tweezer control is out of this world. Well done!!
As long as the tweezer is good straight and not gunked up with flux, it's a great thickness. Not too flimsy and burns off fast for tinning. Rest is practice 😄
a hair is 0.05 mm he is literally using a wire that is slimmer than a piece of hair
Very good job. I am sure the few moments of lost footage won't be missed, compared to losing it all!
Absolutely 100%.
I will never tire of watching you work your magic Erkin. Thankyou for having such an open attitude to your knowledge, you truly are a master of your art
this really means so much to me! Thanks
Whatever you want
Damnit lol
🗿
I've always had a massive amount of respect for people with this kind of knowledge.
Such an amazing skill.
You have amazing hand skills but your knowledge in digital logic is even more impressive. One of my two favorite repair channel on Yt, the second being Northridgefix.
Please continue to give us quality content like this. 👏👏👏
Don't forget STS and ipadrehab.
Always fascinating, owner of the card from going from nothing to virtually complete intact recovery am sure is thanking his lucky stars for your skills.
I gotta start getting consent from clients to post their emotions on the other side of the phone after the job is finished. It's hard to explain, but it feels like you just rescued their pet from a burning building 😀
Man, everytime i see new a video i seen something new, your skills are amazing in soldering and knowledge, i know this micro soldering is very hard with good equipment but for this kind of job you need skills, you explain every details and help people to recover data from such devices. This channel is underrated and need to grow, i know we need good tools for this but without skills you can't advance. Keep up the good things, i hope to put a track like you do on the beginning, i watch every video from you everytime.
thank you so much, for real
Another cool recovery. Checking in on the 2 hdds I sent to you, both clients want to proceed. Left messages on your ticketing system
What i like mostly about your videos is that you do not just fix.
You also like to teach.
Teaching full time may be in cards for me 🙂
Great channel! Totally professional and positive attitude. I really enjoy watching.
I'm commenting for the algorithm, chears. Love your videos.
Thanks for that!
it's wild seeing the architecture of the data and sector layouts ...of all the brand types and formats ...where does one go to learn just the basics of that ...and has data recovery become more afforable for the customer ..all i was seeing was 4 figure quotes ..and that was concerning ...or has this type of service been more accessable to everyday off the street customers ..i dig the videos :)
tool vendors like Acelab and Rusolut offer training for their equipment. Data recovery pricing probably did come down a fair bit since mid 2000s when I just started. We used to charge 2-3K for just imaging the drive at my first job. chip off recovery here (for the most part) 300-900 range unless pinout development is needed, XRAY and stuff like that
Comment done 😅
Love your videos, great skills you have for microsoldering and data recovery
Greetings from Portugal 🇵🇹
Hello there!
So glad I found you!! I’m excited to see what you can do with my case! Thanks again.
This is insane!!! Crazy talent!!!
I am stoked about this project of yours
Excellent work and conveyance of your technical skill and knowledge! Cheers!
Very professional, smooth and steady engineering works, keep it up, love and support from Northeast India Nagaland
I appreciate it
Great video 👏🏼👏🏼
You deserve way more views +subscribes people don't realize what you are doing requires precision.
some day, but honestly, even with the views we get now, there more work sent out way than we can do.
Erkin my friend once more magnificent. You are doing artist level work here. have fun
Excellent work! Always a pleasure watching your vids, Erkin! Stay awesome!
Thank you Dmitry!
I'm not in data recovery business but I love to watch your videos
That's amazing
So clever! amazing work my friend!
Thanks Moti, stay safe bro
Make sure you get at least 17 children! You have lots of knowledge to share.
:)
whatever you want
:) I appreciate it
I'm always in awe and inspired by your skill. Amazing job!
Wow, thank you!
That was a lot of work, thanks for sharing your solution. Charles
Hi Erkin. You could be a surgeon. Your chanel is real jewel.
Wow, thanks
I love your precision working mate, best ive seen. 👍
Thank you so much
This is like magic to me. Awesome stuff.
I am glad you like it!
Amazing - a work of an expert from another world
good work!
Whatever i want
Salute to you A Genius.....❤Love from INDIA
Great job as always!
As always, a wonderful job!
Thanks 👍
Wow...Very impressive.
Thank you Michael
Beautiful work sir, and i like the idea of 2 chips i was watching and thinking how you would do it and i was miles away lol... again nice work mate
Thanks 👍
Crazily under threat
Thanks 🙏
Very neat!
Thank you! Cheers!
Ouch !
When you have all the valid data you can get freeze the card & try again .
PS don’t overwrite the first data dump ….
Sometimes it does work indeed
i just discovered your channel and i love it! can i live in your workshop?
Haha 😆, welcome aboard
I love your channel
Thank you!
Great job!!!
That bit rot can too happen due camera writing process or sd card i/o error while in usage. You cannot restore those ever, only fine tunbe by hand back most liekly back close to original but not ever original.
You see, only one bank out of 8 had them, so am keen to think it was an issue internal to the individual crystal. I/I errors during use would probably be consistent among other CEs also
@@hddrecoveryservices Makes sense.
You sure know your stuff man ❤
had problems over the years with lexar and pny cards died out of the blue...luckly i was shooting on 2 cards simultaniously
There you go! That's the way it should be 👍
наконец то я увидел что у тебя для карточек не новая плата а уже залуженная. а то я уже начал думать что каждая карта на новую плату. 😅
Да, у меня штук 30 этих переходников в ротации:)
If Erkin cant recover it nobody can! Good job buddy! Jerry L
Jerry! thanks brother
Very nice
👍
Always a brilliant video
Great vid, as always. Thanks :)
I got a PNY 64GB SDcard, inside it is a microSD, and I already sent a message to you about it hoping that I can get some help if I send it to you.
Hi Rabi, internationally short cards are something we stay away from. Sorry
Nice😎, You just saved someone's skin. 👍🙂
Dude, don't even wanna know how one feels the moment they realize it happened
Can you start a basic course
Nice work, can you have a little picture in the corner, so we can see how small it is, you are working on.
Ok next time
nice
Top tear!
Thanks 👍
Since you said comment what I want...
I will take this opportunity to say one of the most controversial things ever....
I think we need to delete from existence mint chocolate chip ice cream. It is a disgusting tragic loss of cream and chocolate.
If the flash controller is damaged, can I solder the nand pins from the damaged cars to an exemplar card and have it work? I don't have a PC-3000 Flash
good question. If you know what controller is used them, and how to disable original controller then yeah. This case is a proof of concept czcams.com/video/0nV2ifn0o7k/video.htmlfeature=shared
There should be already a board to make such an interface
yeah, if it was common enough it would be worth it.
Why is Lexar your favorite brand??
The recoverability is great, chips are usually micron or spactek which read amazingly clean. Starting Lexar project usually ends with success with very little room for failure
Fail more often...
how do you break off the wire so easily??
It's 0.04mm thick
something commented
Where to buy such wires?
are you still able to recover a drive if it has been full disk encrypted, or do you need the clear data in order to verify your success?
linux full disk encryption? like dm-crypt.
With decryption key yeah, I don't see why not
@@hddrecoveryservices is it possible without the key though?
Молодец. Давно смотрю. А также знаю , что неплохо на русском говоришь. Привет из Беларуси.
Спасибо большое. Привет из солнечной Канады :))
Hey really love ur work , I'm in south Africa how can I get ahold of you ? Similar situation
The contact form for us is here: www.hddrecovery.ca/contact-us
@@hddrecoveryservices thank you so much just filled up the form will be waiting on you appreciate it God bless you
For the Algorithm!
Thanks Brian! 🤙
I have several questions if you can answer
How much do you charge for this job ?
where do u find schematics for each card maker to know were each test point should go ?
Can PC-3000 recover data from USB made by MacBook (or any other Apple computer) ?
We develop schematics that are not provided by vendors if clients are willing to pay for the work. It's expensive labor. I will post the process in future, I have filmed a few cases for pinout development. Rusolut and Acelab give their clients access to their members only schematics. Over the years both vendors had built an impressive amount of schematics. We also have telegram and WhatsApp groups for close knit data recovery fellas who share these if someone needs them
@@hddrecoveryservices thank you, this explains why I couldn't find almost anything on the web. How about my other 2 questions ?
@@hddrecoveryservices thank you, this explain why I cannot find almost anything open on the net. what about my other 2 questions ?
❤
Thanks
Funny that u don’t work on all micro jobs for the highest price like GPUs and shit u have the skills I’d do what makes the most but I guess data is based on parts but the importance of it so u could charge what ever
GPU has top cost because it's replaceable. If the price of my services exceeds the cost of replacement then I would not get the gig. Data is not replaceable, therefore the price is subjective to the owner of the device. Getting data back is very expensive
Comment
Hi five
Patreon! Patreon! Patreon! Patreon! 😙😙😙😙😙
soon my bro!
Tomater 😅
:)
@@hddrecoveryservices for the CZcams algorithm 😅
dont fix stupidity. let them get a divorce