Turned Up My CK2610. Was It Worth It??
Vložit
- čas přidán 20. 05. 2022
- Last video I showed the process to turning up the fuel injection pump on my Kioti CK2610 tractor for more power, now I get to test and see if it made a noticeable difference! Also managed to damage a wheel along the way
Created by InShot:inshotapp.page.link/YTShare - Auta a dopravní prostředky
Wood block and hammer works good on straightening wheels. I have a CK 2610. Love it 👍🏻👍🏻
Keep the videos coming random content with tractor!! I have ct2025 love it. But just enjoy watching similar tractor .
Just bought 2018 2610 with backhoe with 100hrs sight unseen with sundown 5’ flail and pallet forks . Can’t wait for delivery .good look
First time to watch . Thanks for the mistake scene and leaving it in. You appear to be an experienced operator and it gives us neophytes hope that with practice, we can be an operator. Bill
I have the exact same finishing mower. SGM 72. Bought it new in 2022. Mine is LMC branded (painted red, imported by Lowery Manufacturing in Boaz, Alabama. It’s the same mower that Agri Supply sells, that they call a Grizzly. The mower is made by Shaktiman in India. They are well built, quality made mowers.
Loader went on pretty good!
13 whacks... back in shape 👍 scary the rim bent so easy... My Branson 2610h hasn't had issues yet 🤞
Very interesting, I’m worried turning it up would hurt something over time, but am drawn to this tractor because you have the option lol
Great info and great video. I wondered about the 6 foot mower. Good to know that you have plenty of power.
Thanks!
I have run a 6’ WAC finish mower since 2008 on my kioti ck 20 ( 20 hp)No issue, plenty of power.
It runs a 4’ bush hog fine.
I had all four tires foam filled when it was new. It was worth the money: no flats, no bent rims.
I imagine getting new tires will be a bit more difficult.
I'm definitely glad I went with the 6 foot mower for mine!
I've had mine turned up for year now runs my 84 inch finish mower great and my 6 ft cutter better
Now that's an awesome garden toy, everyone is gonna want a go
I have the same issue and I poured a level concrete pad and it goes on without issue.
VW is still running lug screws? I knew all the air cooled bugs, busses, and so on. I have owned a couple bugs made into Baja Bugs but thought surely they had come into the new century. Thank you for this and be safe.
Need a video of how to turn up the hydraulic pressure on the CK
The secret to running a 72" finish mower with a 25hp tractor in good grass without bogging it down is to have a rear discharge mower. A rear discharge mower generally is much more efficient with power. A side discharge must not only cut the grass but must then rapidly move it a great distance with a great volume of air along baffles across the deck and finally through a small discharge outlet. Power is transferred from the gearbox to the blade. The blades on a side discharge generally have a much larger airfoil on them to create the force necessary to move the grass and air. The blades then wear out much quicker because of all the extra work they are doing compared to on a rear discharge. And that goes along with belts and bearings and fuel usage and etc. How do I know? I have a kioti 2610 with a 4030 loader. I also have a few box blades and mowers. I personally like the bush hog brand of 3pt mower but there are many good ones out there.
Framing and claw hammers are made to drive Steel nails. I've been a builder for 40 + years, the ONLY problem beating steel with a framing hammer is you can distort the head thereby making driving a nail difficult.
rear discharge close to effortless in comparison
Thanks!
Skip to 19:38 for the answer.
Was thinking the same.i should have come to the comments first😂
I'm 14 minutes in, went past a good bit as its clear this video isn't about "Turned Up My CK2610. Was It Worth It??" for at least the 15 minutes...
*I would assume the power increase will void any warranty....or do they not notice?*
Did you check your exhaust temps?
Just getting in to tractors if you turn up the fuel pump that will void the warranty right?
I'm suprised you bent that rim back with a little kids hammer. I have had to bend rims back on many things from tractors, SxS and even cars.
Yea, it surprised me too. Almost a little disappointed that it bent so easily, but the good news is that I can straighten it without much trouble!
What is the part number for the arm rest?
Why wouldn't you use a piece of wood and hammer to set that wheel straight ?
( to protect the paint and to soften the blows)
Because if I used a piece of wood, it would have dampened the blow and it was a very light hammer as it is. To be honest, I really didn't expect the wheel to bend back as easily as it did, so once I saw progress I continued with it. I've already got the paint touched up
Aren't you concerned about coming to a dead stop with the bucket if you run it down?
When I saw you bring out the framing hammer, I thought no way is that hammer going to bang out that bent rim watching the video I had to laugh how easily you banged it out perfectly . Just a little suggestion though be careful using a claw or framing hammer banging on steel. Careful in the woods, or you'll be getting a lot of practice,nice job and did ever leak?
Unfortunately that shitty little hammer was all I had. My trusty 2lb er is at the shop, not my house!
It might have lost 5 lbs of air since straightening it that day, so I'd say it's not bad!
I hit a stump at an angle and bent my rim really bad. It was so bad the tire was knocked off and it had a huge gap. My neighbor watched as I banged on the rim with a sledgehammer. He couldn't believe I straightened that rim back to almost perfect. I think I could probably have done a little bit better if I had a big shop press. But you have to use what ya got
is that engines still the same one their using now? (3A165LWM-U) would tuning still be the same?
I believe that is the same number, yes!
Do you know if the new 2023 2620s are the same engine so this is possible? Im assuming a dealer wont tell you as they dont want people doing this!
Yup, exactly the same machine except for a facelift!
Hi
Great video, does the HP increase at the PTO also ?
Yes, the pto horsepower is directly related to the engine since it's a mechanical connection. You turn up the engine horsepower and the pto horsepower increases as well. It makes a big difference when running pto driven implements
Question: did change cause the engine to achieve higher RPMs than before the turn up?
No, that adjustment would be from the governor, this simply turns up the fuel supply so that the fuel pumps more fuel at wide open
Time to turn up the hydro pressure or make sure it's at least at spec.
My brother has a gauge for his Deere, but I've gotta get the adapters to go from his 3/8 fitting to the Kioti 1/2
Are those R14’s the bias ply or Radial? How do they work on the lawn? That rim looks pretty thin. Bent way to easy.
These ones are Bias ply. They work extremely well in the lawn and only damage the grass if you're turning full lock. I wasn't crazy impressed by how easily that rim bent
@@upstategearheads kinda a short side wall and made tire less ridged
What do you keep the front and rear tire pressure at ? I have the same tires. The Kioti manual does not make any sense regarding tire pressures.
I've honestly never checked the rear tire pressure but I believe they are around 20. They are filled with Rim Guard and you'll probably get some residual fluid blowing out the valve stem into your tire pressure gauge when you check the pressure, regardless of if the valve stem is at the top or not. They say to just use a cheap, disposable gauge but I don't have one. The fronts however I run almost to the max, usually 35-40 psi
keep them at 15.
You should have three bars on your rears touching the ground. On my CK27hst with R 4s it works out to about 15 lbs/sq" pressure.
Wish I could turn up my 2610 but it’s new and it’ll void my warranty 😫
Wow, that rim moved too easy. Hope I don’t hook Mike
Yeah I wasn't very excited when I saw how easily that wheel bent
I have a standard ck22 Hst 22hp that runs the same size mower fine at standard Power
Mine did too, but hook a 6 foot brush hog to it and mow hood height grass. Then you'll notice a difference
@@upstategearheads yes 1 way to kill my engine if I do too long 😂
Be nice to that poor tractor!
I’m interested in this tractor but with the backho I know it’s smaller and I’m used to commercial equipment. But I’m curious on how this does for moving piles of dirt and digging some holes and trenching 2ft deep for electric for home use? Or should I get a the ck35 one with 35 Jp or the one with 40 hp any advice will help!!
I have zero experience with the backhoe so I can't be much help there. But the way I look at a backhoe is: for $8,000, I can rent a lot of mini excavators and they will do a nicer job in the long run. But for someone who's work around grass at a customers house, I can understand where the excavator would destroy the lawn with the tracks
I know this is a dated post but 9 months flies and maybe the info can help. I bought the 2610 w the hoe attachment and when I received the equipment my first impression was an $8500 gardening tool. I was disappointed but i kept it parked it out back.
I recently needed to do a fair amount of excavating due to an electrical feeder cable having a break somewhere along a 150ft stretch. I broke out the hoe and started digging, code is 24" minimum for an electrical cable, i figured i could get there in most spots. Who knew previous owner dropped the cable in at 60" plus, would have never guessed it. The soil is nasty clay with slabs of shale like rock and is impossible to hand dig with a shovel. (I know how to operate a shovel with the best of em but not a back hoe). I am so completely pumped i added the hoe to my tractor upon purchase. It is a steep price for any tool, I get it. But I've had to dig up the majority of this cable and whether I'm punching through the clay and shale layer or doing fine maneuvers around said cable this tractor hoe setup is bada$$.
Only two complaints, first is I wish it were bigger as in longer reach. I find it somewhat limited but only after i have dug a 6x4x6 hole in the earth. The reach issue is almost 90% addressable with a small tractor relocation.
Second complaint is that the how assembly is somewhat of a bitch to put back on the tractor. But I'm a newb and at least 50% of the issue is me related.
Ok three items. The third is that i can't reach the throttle control from the excavator seat. I have to have long dowel with hook on the end to make throttle adjustments for hydraulic power.
Aside from those, the gardening tool is one beast of a digging apparatus and would recommend to anyone looking to purchase to do so with the initial financing package.
@@brett9736 I ended up getting the ck 4010 se 8 months ago no backho attachment due to stock but I knew I needed a Gannon box and I’m happy to say after 50 hours I’ve built 2 massive pads raised elevation of 4 ft in most spots and moved all 800 yards of dirt with it equaling about 1555200 lbs of dirt
That was impressive. How many turns did you give the fuel pump screw? I'll be doing this once my warranty expires.
Bottle jack works on bent rims
Must be nice to be able to get up off the seat with out the safety switch kicking in and shutting the tractor off. I want to disconnect it.
You can make a jumper for the seat really easily, or if you really never want to hook it up again, just snip the connector off on the tractor side of the wire harness and splice the two wires together
Just put tractor in Neutral and set Parking Brake. Tractor won't shut off. Even with PTO on. I have a 2020 2610. No issues.
@@bradt9041 correct but if you're on and off the seat a bunch then that becomes quiet the inconvenience
Curious, do you own an 600LT?
No, I wish. It was a shirt I purchased to try to win one though!
Guten tight..
The video was suppose to be about the results of turning up the engine pump?
Didn't I test it out and give my opinion of how it performed?
@@upstategearheads You sure did .... Very good info. Thanks
There is a guy on Orange Tractor Forum, the other orange brand, running a Kubota L2501 I believe. Turned up the fuel and added 8-10 pounds of boost to give about 40 PTO HP. Claims no issues. Oh, uh, never run a machine with a cab equipped with heat and air. It will ruin you.
Did your bucket come with chain hooks or did you weld them on?
I welded them on. They're 3/8 hooks I bought from Kens Bolt On Hooks. Check out their website, Tractor Time with Tim has a discount code as well I believe. I've gotta admit though, I think I've only used them maybe once or twice since I installed them. I would probably use them more if I didn't own a set of forks
@@upstategearheads that’s for the info. I got the same tractor this year. I got 33 hours already and a mile long list of projects for it. What part of upstate NY are you from? I’m on the north of Oneida lake.
@@ericwagoner9149 Clayton, north of Watertown on the St Lawrence River
I got weld on hooks from Amazon. I also used 3/8 and then put 1/4” plate under them to spread the load out. I use them constantly.
@@steveb4992 so you welded the 1/4” plate on the inside of the bucket or just as a base plate?
o there is no impact by doing this? engine issues? rich? lean? the why would the factory design it like this initially? seems odd its so easy to do?
I believe I just answered your comment on the other video
Hell yeah it's going to run that brush hog, your not mowing anything!!
20:15
Thanks!
If it will do 35 hp it will do 45 if you don’t mind the rolling coal..
I like the way you think! Makes me want to put a pyrometer in it and turn it up more!
@@upstategearheads I sure would!!! These kioti tractors are growing on me.
You may look and sound stupid, but you have the right to put your life out there just like anyone else. You do you, boo!
Thanks for the positive comments. Really inspiring for me...
@@upstategearheads yo man, ignore this fool troll. If he thinks your life was at risk at any point he doesn't own a tractor, let alone a property where a tractor is needed for general maintenance. And if he had any balls at all, he'd be making his own videos instead of hiding behind a keyboard, fault seeking on those with true ambition. Fukn trolls.
(I do love the freedom of speech (ish) in this country even for this f stick, he is the price we pay for our freedoms)
Please don't say the Bobcat and Kioti tractors are identical. That just isn't true. The lifting capability on the Kioti is much higher than the Bobcat by a large margin. The Bobcat is around 938lbs and the Kioti is 1835lbs. They are similar is a lot of ways due to the same parent company making both. So some of the parts are the same. Different wiring also between the 2. Obviously people looking to buy a tractor need to do their own research. But coming to CZcams is part of the research. Just a heads up. I am curious about using th HP on the 2610 to get the most out of it. Are you done doing all the necessary adjustments so the timing is all correct? How is it running now if you did do it? It's just nice to know that the option is there and it works.
The only difference between the Bobcat and the Kioti are the loader, that's it. And the Bobcat lift capacity is 1369 @ 500 mm (20 inches) ahead of the pivot pin whereas the Kioti is rated at 1835 at the pin, so two different ratings but work out to be nearly the same performance from the seat, not nearly 1,000lbs different.
I have not done the timing adjustment yet. It runs identically to when it did before making the fuel adjustment, just with much more power. I haven't seen a single disadvantage to it yet
Thanks for replying back. I have been looking to get a tractor. The Kioti CK2610 is at the top of the list. The big reason is the lift capacity. My issue is I don't have a dealer near me. If the Bobcat lifts the same as the Kioti, which you say does or is close. I stand corrected. I do have a Bobcat dealer kinda near me. Not sure if they sell tractors. But I will find out. I may have to put the Bobcat at the top now. That would be huge for me. I of course will have to research and find the true lift capacity of the the 2. Would be a homerun if they are the same. I appreciate the feedback. Again thank you.
I had originally intended on purchasing a Bobcat, both because of the name as well as the dealer is closer to me than Kioti. Once I ordered the Bobcat and the delivery date kept getting pushed back further and further with no end in sight, I looked at Kioti and the dealer had 3 in stock. Not to mention the dealer is a smaller, local guy who is great to deal with and the R14 tires are not available on the Bobcat and I wouldn't trade them for the world
Dude that is not brush hogging or Bush hogging. Bush hog is the name of an implement not an action . All you had was a finish mower .
Grinding off protective cap VOIDS warranty..... when you overwork your toys they wear out quicker,,, get new ones sooner :):)
I'm very aware, but I wouldn't consider turning the power back up to the original spec that the engine was designed for to be "overworking"
Do you have to advance the timing from 16* to 18*?
@@gsalvo9147 I have not done that yet, but I intend to. Actually I'm really looking forward to that part since time advance is a huge part of how an engine runs
@@upstategearheads looking forward to that video.
Local dealer told me it’s built as a 35hp engine that they “detune” to 26hp so it meets emissions standards so it doesn’t need the extra emissions equipment
Get a spud wrench for your loader. Make your life a lot easier.
The bolts on your mower 3 point (left side) are just flopping around. You ever go around and tighten bolts?
21 min vid of everything BUT turning up the fuel, and you don't say how you did it...
I covered how to turn up the fuel in the previous video
The mower bolts are tight. They are designed to have slop so the mower can float over the contour of the ground
I don't have much issue lining up the loader and I'm not sure how you'd get a spud wrench in from the backside to allow you to insert the pin from the outside. There's not enough room between the loader and the hood.
But I appreciate the observations though!
@@upstategearheads the mower bolts should pivot on the bolts, not flop around.
I use the spud wrench sticking it in the pin holes and doing fine tuning to the alignment of the pins. If you "weren't having problems" you wouldn't need to kick the pins like you do.
Not just giving you a hard time bud, I use my tractors to make a living every day and just sharing my experience.
The mower originally had a collar on those bolts so that when they were inserted in the holes there wasn't any movement in the deck. It was totally rigid side to side and wouldn't allow it to float over the ground at all. It's designed so you can remove the bolts to allow it to follow the contour of the ground better but I found that when I did that, the mower lift points would just pivot vertically before lifting the deck, making it a pain in the ass. I found that if I installed the bolts without the collar it allowed enough movement to float yet still lift the deck reasonably
@@upstategearheads watching your vid again, you may not understand a better way to use the "mower". The rear on yours is too high, you want that at the height you want the final cut to be (say 2") and the front you actually want to run a couple inches higher than that. Most of your vid you're almost dragging the ground with the front and the rear isn't doing anything by time whatever needs to be trimmed reaches the back. Again not bustin your chops, just telling you what I experience daily.
angle is sloped to the front a little too much... Mine gets slopped and banged around everwhich way when not on flat ground. I even use it sometimes to chip/mulch small 2-3" tree limbs a Quick down & Up when I don't have a chipper available. My Bush hog ain't new and getting older faster
Never ever ever buy non fuel tools.
Chinese steel
The way you run stuff you would never touch anything of mine. Rev up on cold start, kicking shit, no idea proper way to do loader.
Care to explain to me the "proper way to do a loader"? Could you see the temperature gauge to know if it was cold? Would it have been better to beat the pin in with a hammer instead of the gently sole of my shoe? Please help improve me as an operator....
Have had a few tractors with loaders and will admit not all are in “perfect” alignment but usually it’s just floating the loader arms a bit. Bet your not a mechanic or mechanical but I like the content so keep up the good work !!
“Hammer shoe” needs a patent pending disclaimer
Loader would be easier to hook up if you had your wife out there helping you. (all the married guys just laughed outloud)
Hahahaha. Imagine that! She might accidentally get her hands dirty!
I cringed at the wife helping. Mine tried to help me put the hoe on, 4.5 flipn hours later, pissed off as all hell, we finally got it on and pinned. My rookie ism did not help but the lack of mechanical aptitude, giving a shit and just plain ol chic from Venus were more of hindrance than i thought possible. My buddy and i did it the next time 15 minutes, second try and she was pinned and ready to dig.
Adder: my wife and i were in flat concrete and my buddy and i were in a crooked, uneven prairie surface. No chics allowed in the barn, using tools, or driving the equipment. lol just kidding, kind of.