Trying to pull augers!
Vložit
- čas přidán 5. 09. 2024
- Alright so we are now pulling out all these metering augers to change not only the auger but also the bearings.. Or Atleast we are trying to get them out! 😆
For extra entertainment, polls, pictures, flash backs, Ashtyn & Chapel, and more interactive content or just to contact Mike 🙂
www.patreon.co...
Also check our website for more information about our family farm and our new merchandise at
Www.faithhopefarms.com
Lee has a farm!? time to get the production and filming crew around to give us a tour :)
Watching you take something apart is painful, but I watch anyway because we love's your show.
If you ever end up with a set screw with the hex stripped, find a sacrificial Torx bit that hammers in somewhat tight and that usually works to get it out!
When you refit the rear sprocket back on fill the holes of the set screws with grease after tightening them up and then they come out easy the next time, as it stops any water or dust ingress
I walked away and had the TV turned up so I could still hear it. My mom came by and came in and here goes Mike saying knock your nuts off and then lube the shift and start banging on it and my mom said son what in the world are you watching, it sounds like someone is going to really be hurting. Lol
My head just hurts watching you hit your head so many times. 😆
Good luck fixing your air seeder cart Mike
Great video Mike
6:47 mike and lee man! too funny hahahahah ❤
Morning
Mornin'
Mornin sir.
Good afternon
Mike..the metering section and the transitional section are different diameters. That's what your seeing there. The augers aren't looking awful. The pdm pro with polyliner on poly auger seem to hold up better than the old pdm and pdm plus
Hello Mike sacred renovation your seeders.
When you go to sow with your team could you ask Donovan to film with his drone?
Hey Mike roll da dice 🎲 3rd time lucky this year
God be with you Brother I hope you have everything resolved completely before you get out there. Hopefully. You guys are plugging away at the job steady I’m sure it’s probably already finished depending on when you made the video 😏❤️🖖🏼🇺🇸
Nice setup!
Hello Mike!
Hola Amigo!!!! Saludos desde argentina .... estaria bueno que lo tradusieras ...asi aprendemos mas de la cultura Canadiense y los secretos de los fierros agricolas....
Hey Mike good trick to avoid a bit of stripping. Super glue with an activator and some acetone for when you done. Glue before stripping.
The rule of thumb saying when someone is holding a part that is about to be smacked with a hammer: 'When I nod my head, you hit it'...
Question Mike. What if the last owner changed augers. Is there a serial number on auger? How do you know how actually old It is?
Do you clean and wash the planters at the end of planting?

One question. Where did all the “Mud and River Water go”. Now you look like your in the dust.
Those air seeders are as complicated as corn planters
Thank You for explaining everything 😊
Howdy Mike
Too much rust, dang... Your Dad should of Washed that. 😮 It's just going to cost more money not to wash equipment when you are done. Wish companies would do more powder coating on parts instead of paint. A Rust inhibitor and powder coat would go a long way to saving maintenance. You’ll be in proverbial Heaven once you get some big Shops to store your Implements.
My buddy uses graphite lubricant on his Bourgault
Ahhh, is your brother a Pittsburgh Pens fan?
Magnifique réparation du cuve 😂😢😮
Lots of never sneeze and MoS2 dry lube they'll come off easier. 😅
👋😊
You can't use a gear puller
Still can’t believe you leave all these machines covered in fert unwashed out in the rain, frost and snow to go rusty and seize up , and not even a shop to do all the expensive repairs out of the mud and snow. Alsonear million dollar combines and drills/seeders , not to mention the tractors . Must be extremely expensive ???
He bought this one second hand. Previous owner didn’t wash it down.
don't be a fool and choice not to change the worn out i all was said do it right the first time you're not doing it the second time in the field too but it is your choice to make last fall i rebuild i neigbher tractor motor put in a rebuilt on for him he did not lesson and put an extra large hole in his block too he use one of my rentals the has new tires all around it not his race slicks he run too he did not have any problem getting around his fields too with my tractor too
he did say a new tire would make a difference to the choice not to put a new tire on the tractor be he buy the rental for me did sold his to another farmer need it for parts lol just had to buy a new tractor myself and demote an older one to a rental tractor warrant the tractor for one year he voided the warrant when he put a fount end loader on it none of the tractors i have them on
i have a loader for that too or skid steers