Installing the Motor on the - Home Made 6 Speed Electric Dirt Bike - Part 5
Vložit
- čas přidán 20. 04. 2024
- In this video we are building another electric dirt bike, this time we are modifying the dirt bike engine and installing the electric motor into the engine so therefore we can still have the 6 speed transmission and clutch.
Follow me on Patreon for early access content:
/ ratherbwelding
ArcDroid CNC Plasma Cutter Affiliate Link:
bit.ly/3B6G7Px
ratherBwelding merchandise
bit.ly/2PF21Vf
Follow me on Instagram rather_bwel...
#fabrication #dirtbike #electric
Music by Epidemic Sound (www.epidemicsound.com) - Zábava
Keep the plastics and put a charge port in the fuel cap 😊
Agreed.
Agreed
Agreed
Yup, this.
just what i was thinking
Shroud and full plastics are definitely much better
Full plastic set most definitely. Looks professionally done with everything on it.
Yep, definitely needs the tank and plastic goodies. If you can find some similar colored plastic to extend the front bottom of the tank, it would probably look even better. Plus that expanse of sheet metal on the back of the battery cover would probably be ideal to mount the controller and keep your power leads fairly short! This is turning out really nice Chris! Electro-Suzi lives!😂👍👍
Your the guy they needed for all the building shows that died out because they all became ads only no builds ❤your are tv (CZcams) gold 🎉🎉🎉
Jesus. Try to keep your shorts on pal
Definitely looks better WITH the tank and shroud.
I like it with the plastic !!!!
Sleeper electric ⚡
I like both looks, but the plastics concealing the electronics speaks volumes about the build quality. And that’s a good look.
With the shroud looks alot better to me
Would have been great to integrate the battery box into the design of the frame. Make it a structural piece, and functional.
Yup
Def the shroud. Although your work is exemplary and should be displayed, the shock value of a stock looking machine will be much greater. This is an awesome, inspiring build.
I like it with the plastic And Gas tank
I’ve never been a fan of all the chains on everything but this build has made me me me take a second look. You can build anything! Just because others have done the same thing doesn’t mean you can’t do it better. Keep up the work
Watched a kid a few years back that built a functional mini tank. I feel like your rendition of that would be epic!
I love what you have done. Mad respect. I wish my surron ultra had at least a low-hi gear. If only someone would make a planetary 2 speed to replace the jackshaft along with a solenoid shift. This would allow me to run a large rear sprocket for gear reduction and shift to a high gear when the motor runs out of RPM.
Your knees will want those shrouds on trust me.
Shrouds and gas tank might help out with cooling forcing air around the battery box down to the motor
I like the plastics as it hides the battery box and closes up the big gaps.
Yes this project is back! I can't wait to see this thing rip
I’d do a bolt on piece across the top of the battery box connecting the upper frame rails right at the upper bend and a set of tubes coming directly from the rear shock upper mount to as high on the new frame rails as practicable.
MAN !!!! what a build i love it
Thank you for all the hard work in making these excellent videos.
thank for building this, its awesome i hope to this to my 1978 honda 250s when ever the motor goes.
Third times the charm. Loved the outcomes of the first two but they weren’t the original idea, this is. Glad to see the original idea come to fruition.
Thanks for filming again Chris. 😁👍🏼
Full plastics looks good and if it’s leaking oil it’s just letting you know it still has some
Great work, can't wait to see this thing rip!!
Personally i do without plastic. Could paint it black or try to match the other colors.and for the frame Yes thats strong enough. Good job so far
Will amaze lots of people
Awesomeness dripping awesomeness all over the place . Cool
Keep the tank and plastic on that looks better and you have done a amazing job with this bike amazing.
The stealth effect is fantastic
Tank an shrouds is definitely better looking. But batter alone looks presentable
Definitely with all of the plastics!
With or w/o gas tank look great. If you go w/o gas tank paint the battery box and it would look great!
Full plastics definitely 👍🏽👍🏽
Awesome!
I like it with the tank and shroud
I really love your channel and admire your garage! I took some welding classes and have been making custom frames just like you! I would love to for you to make a video on your shop, tools n hardware you use/have and use regularly for welding. where you store your bare metals. And possibly hacks that make custom fab work easier. Thanks again and great channel!!
I like the look of both
Looking good 👍 ludicrous mode coming up 😮☮️
All the plastics look the best in my opinion
I like this rather be welding channel
Love all the plastics, sleeper look.
I like it with the plastics on, I have stealth bomber clone and I added CRF50 shrouds. it works well to have something plastic to squeeze your legs onto when hitting whoops.
Dang that thing weighs a ton, I want to see a rider ride this cool as hell..
I like it with the plastic
Keep in mind, your using a 2 stroke transmission which is a very close ratio because 2 strokes don't have torque. You would have been better off using wide ratio transmission. The electric motor had all the torque. You could use the wider ratio and use more of the gears.
Hello, big fan of your builds , I'm not sure of the terminology on electric bike motors , but on RC's I always go into the ESC programming and turn the "punch" level down to about 50% ( it acts like a soft start-up , ) it also makes it ( the RC ) way more controllable and puts way less stress on the drive train when you punch it , it's not as quick to respond , but I'll take that over replacing broken parts any day .
P.S.
If you mention this comment on air , my name is Scott not Joe .
You always got the dopest background music
so glad I came across this channel
i love this project! your super talented brother
It definitely looks better with the plastics on
Back at it again with the rather and the B welding
I like the plastics on looks like a sleeper
Keep tank and all the plastics 🔥
What a beast
Definitely looks better with the tank and plastics. electric sleeper starts better convos
I liked the blooper reel you did at the end of your previous video. You should do those more!
Keep it stripped, it's your best looking bike, yet. Like the gears, too.
I vote keep the tank and shrouds! Looks awesome. Also you might want to loosen the chain. It looks tight
Get those 1/4 of circle chamfering bits to your handmill. Some of them have a bearing at the tip that you can lean on and just mill off the chamfer edge of sheet. Those are widely used to make alu products for more appealing and nicer to humans as the edge is smooth and round.
Ones with two flutes for wood work fine with alu.
See the video ”workpieces in the aluminium material do the chamfering”. There are others too, just search.
I like both versions. An I would change them depending on what kind of riding I was doin. If I was doin more wet or muddy riding I would put the gas tank an gas tank flares plastics on because there goin to block a lil more stuff from flying up in ur face then without them.👍
This is gonna be the most practical electric bike ever once you get the gearing just right. I vote keep the plastics. The charge port idea in the cap from @jacobthebluesman is a great one!
Your killing it bud damn you are the tip of the spear keep up the good work
Looks cool-nice & Happy to watch YoÜ
(I love last Beta RR 300, trail colors blue-red
but yellow-pink... is fun).
That would be cool in a 4 wheeler too so cool 😁
For next possible project, could you build a kayak that has the back portion cut off and build a mount for an outboard motor make an electric outboard and put it on the back and test it has been one of my dreams to try this, it would mean the world
Keep the tank and the plastics
I think it'd look better without any of the plastic at all, and just make custom sheet metal panels for it. But that's just me. Edit: And I'd definitely go without the diamond plate. Make the battery box with flat panels facing outward.
Man keep up the good work bro that's why you look nice and everything thank you invent is nice keep it up man
Keep everything on da bike brother
It defo looks better with the plastics bro keep them on
Supermoto path would look really cool. You could use it more day to day.
Yeah! Back to the eBike!
Best look is with the tank
It will be a torque monster in first and second gear
I would definitely keep the plastics!!
11t:32t is how my RC's were always geared. Could be a sweet spot for electric motors 👀
Can't believe you cut the tank up. 😦
You're so good at metal fabrication, you could of made your own dummy tank, that could carry the plastics. 👍
All the plastics 🎉
The airbox would be a great spot for the controller 👌
Great build, keep tank and plastics. Make sure you have air for batteries. 😊😊😊😊
I think keeping the plastics will make it more comfortable to ride.
With the tank and plastics for sure
Full plastic looks way better!
Rally interested what it felt like in low range on the kart.
Can't wait to see how it works with improved gearing.
Looks best with the plastics, little bit of a sleeper look. Epically once you figure out the gearing.
You should us all the plastic because you could put the charging spot where the gas cap goes and you could take the cap off you charge it instead of gas
Quedo hermosa hermano. paso siguiente hacer planos y empezar a producir en masa.
Should be able to add a ramping curve to that esc. Should smooth it out. Awesome build bud.
Leave the tank you made it look so sick people will be amazed on your work
I vote keep all the original plastics and tank so it looks like a real dirt bike
I prefer with all the plastics on.
I'd definitely test ride before changing sprockets, it might feel fast enough when your riding, especially given the torque of an electric motor.
I think it would be neat if you could somehow open the bottom of the tank up and make it a battery cover.
I guess I should watch the video before I say anything.....
Looks better with plastics and tank. Will surely want a 15 tooth front sprocket at least
Keep the plastics. It’s cool when it looks like something and then isn’t. I would be geeking out on the trail if you pulled up on that and I had to do a double take.
Great content really look forward to each post - must be so much work to provide this so thank you - and I love that's its just garage engineering rather than flashy new workshop and new tools. Also I like it better without the plastics - keep the radiator plastics but make a custom shroud to replace the gas tank?
Красавчик!!!