Video není dostupné.
Omlouváme se.
Window Trim Build and Install.
Vložit
- čas přidán 4. 11. 2021
- BECOME A MEMBER OF FINISH CARPENTRY TV:
/ @finishcarpentrytv
GLUE I USE: finishcarpentr...
INSTAGRAM: / finishcarpentrytv
EVERY TOOL I USE: www.amazon.com...
DeWALT LASER LEVEL I USE: amzn.to/2FI8Td1
15 G NAIL GUN I USE: amzn.to/36Mp44F
STUD FINDER I USE(FAVORITE): amzn.to/30moWXq
FAVORITE TRIM NAIL GUN(MILWAUKEE 18): amzn.to/37Rr3F2
MAIN MITER SAW: amzn.to/2SML4bF
ONLY UTILITY KNIFE I ABSOLUTELY LOVE: amzn.to/39GGYIb
MY TRACK SAW: amzn.to/36rLYy3
SMALL MITER SAW: amzn.to/36kkJWj
SLIDING MITER SAW: amzn.to/39yYo9w
GET A SHIRT HERE: finishcarpentr...
EVERY TOOL I USE: www.amazon.com...
VIDEO/CAMERA GEAR*
MAIN CAMERA: amzn.to/2Kk1Tan
LENS: amzn.to/2MReIej
SMALL CAMERA: amzn.to/2KlLbr3
MIC: amzn.to/2Kkbj5O
DRONE: amzn.to/2IPsby0
www.dfwcrownmou...
*above are affiliate links
Good job!
Suggestion: Before installing the preassembled trim, apply painters tape around the perimeter of the window opening (or door opening or on the wall) so the tape is exposed all around the trim for an inch or two. Fill the nail holes, prime and/or paint the frame and then use a sharp utility knife to cut the tape. Caulk the trim (if desired). I use this method on new window, door and base moldings. It is a lot easier than trying to mask the walls after installation of the trim.
Awesome suggestion, so simple but I would have never thought of that! Wish I could use that trick where wall meets ceiling just cause I suck at cutting in! Lol
@@ed370zx3 If you cannot use tape or masking paper, (at the ceiling it is difficult) then use a high quality (emphasis on HIGH QUALITY) brush. I use a 2-1/2" angled sash brush. Start your paint an inch or two below the joint and gradually press the bristles up to the joint.
When I "cut in" by hand, I put my paint (about a quart to start out) in a 2 gallon pail, put a 1 gallon roller "screen" in the pail and use a 4" roller and the 2-1/2" brush to do the cut in. DO NOT allow the paint to dry before rolling the walls. If you do, you will always "see" where you cut in. It's called a "halo".
I use a 40" walk board to cut in at the ceiling. Then I move the walk board and roll the wall where I just cut in. So I advance about 4 feet at a time.
If I am not installing new base, I use a 3M "hand masker", 1-1/4" tape and 9" paper to cover the top of the base, then cut in the baseboards with the same brush and roller at the same time, moving along about 4 feet at a time.
Good quality brushes and roller covers make painting enjoyable compared to what it is using poor quality tools. They are definitely worth a few extra dollars.
If you have smooth finish ceilings, you can mask the wall/ceiling joint using the hand masker and 6" or 9" paper, but you have to "tack" the paper to ceiling ever few inches with a small piece of tape to keep it up there.
gary K Thank you Gary, def going to use your advice.
If the tape is behind the trim, how does one caulk the trim to the wall?
@@wytas20 My mistake. The caulking, if desired, is done after the tape is cut. Edited.
Love it! I was a finish carpenter for about 6 years and never did it like this (didn't know) and then some cabinet guys that were doing the cabinets, in the house I was working on, told me about doing it this way and my mind was completely blown! Hands down the best tip I was ever given by another woodworker!!
I would love to see a video on how you handle masking for paint. Your work always end up super clean and the care you take in masking really pays off.
It was a great vid. Another plus is that you can paint it before install.
No taping.
Your clean work is much more impressive once you try DIY and notice all the flaws
Color suggestion: a gray to somewhat match the cabinets in the background
Great build. Can’t wait to do mine
I'm doing a new house right now the exact way you did yours. A slight difference in mine is I glued and nailed the' I call them ribbons, to the head casing and then pocket them to the side casing and head jamb. FYI, what you are calling the sill is actually the stool. A sill is on the exterior, the sloped part of the window frame itself. I'm old school. I started in 1973.
Man, I’ve said it before but your level of craftsmanship is off the charts. And I’m a cabinet maker by trade so I know good work when I see it.
If only we had master craftsman that take pride in their work like you do in the UK. Keep up the great work and videos, all looks stunning!
We used one of your older videos and we did these style window and door casings throughout our home. We LOVE them. Paint the window casing a dark color. Dark grey/navy/black...
I was thinking a slate blue/grey as well
I have 7 windows that need window casings. Fortunately there is one casing that is completely different measurements while two are of same dimensions. The last are of all the same dimensions. You have just made my life so much easier if I had used the old methods of construction. Cool beans!!! Thanks Richard!!
Gotta love Craftsman style window and door trim! My home is a Craftsman so I'm a bit partial to the look! Great work as always!
You should do some "dewaukita" T-shirts now since you have started buying Makita tools
In a previous video, he said Dewaukita. I think
Yep he did
Makita has some good deals this year
@@johnlebzelter4208 damn! I don't think he was being mean or anything lol
Yes I'm in full support of this. Colors and everything. I think they will sell.
I have watched this about 8 times. I’m going to add the super simple window casings in my morning room to mimicking what you did for the home in the beginning. Very nice work, I hope I can pull it off.
Good luck just take your time
Love craftsman style, that’s how all the trim is in my house. Classic look that never goes out of style.
I know how to do most of the stuff you do. But I like watching your channel because you always seem to have tips that increase my efficiency
Thanks for this Richard. I've been doing this a long time and never thought of pocket holing the case. Much more solid than just shooting them.
Another great video. I really enjoy your attention to detail. I'm a weekend warrior and its cool to have you show us how easy it is to take our projects to the next level.
Been watching you for at least the past 3-4yrs.
I highly respect how far you've come in such a short time. I just have a couple things to say;
First, great job on all your builds. What sells is integrity, which you have plenty of. Honest, humility, also go a very long way. Both are part of integrity. So I commend you on these qualities.
The one thing I just cant get myself to move from or to, is pocket holes. I cant stand this "cheat", and at the same time, I understand production. I get it, believe me, I get it. Watching your john deer pocket hole machine pissed me off so much!
I kinda want one!!! So as you can tell I'm in a quandary! Been doing this for 38yrs. Was taught by old school, we'll just say guys, not assholes who were for the most part right. So I'm having a hard time bending my pride ( which seems to be losing), in this matter. Again, much respect, I guess it's me that has the problem! Thanks for helping me talk it out, lololol! My very best to you, your family, and your future integrity! Keep growing in knowledge, techniques, wisdom in business, and understanding! You will go as far as you let yourself!
I still hate pocket screws!!!! Lol
Sincerely, david. Per Wood and Nails
I have a book shelf crammed to the last inch vertically horizontally. It's 7 feet by approx 7 feet. The shelves are 26" Long I think( don't remember been many years)
With three shelves next to each other and bottom portion has depth of 13 inches and top is 9inches . Top and bottom are separate boxes.
Its built entirely with pocket hole screws and brad nails for the back.
It's been 10 years and 3 moves it's still rock solid.
I just used pocket holes for a kick just to see how sturdy it will be. I wasn't even sure if it will take the initial load of nearly 30 boxes of books.
Have to make a nicer one now. That design was pretty basic using cheap materials and not finished well because I thought it might just last a few weeks or months.
I can either dismantle it and use the plywood for something else or move it to the workshop to use as extra storage.
Great videos! I show them to my woodshop students. If I had one suggestion it would be to install your riving knife on your table saw so my students can't ask me "hey, why doesn't he use it" lol.
I think he normally does...I know he has talked about it before.
I really love this technique. I just did my first one and while there was a bit of trial and error, in the end it was so much cleaner than trying to build it up on the window itself. Thank you.
I’m a trim carpenter and your work is on another level, i like the attention to detail. I’m in Texas.
What a great looking job....... your a madman...... "I gotta load all this stuff up" Get a 14' trailer, dual axel, new, very clean, and paint matched, take a few days off and bitch it out. I finally did it a few years ago and it was one of my best business decisions. Productivity and most of all, organization, is peaked. Thanks as always Rich, that's some fine work you guys put out.
Gray like your cabinets. So beautiful work you do, so detail it is nice to see someone that truly loves their work.
So jealous of that saw. Thanks for doing the video on it and letting us see it in action.
That dining room ceiling is awesome... As an HVAC guy, my brain is screaming linear vents on the soffits of that lid! that way you don't break up the flow of the trim in the lid! Still an awesome job!
You are good. You are super over my level, but i learn a lot from you.Thanks God for people like you, there not afraid to show what they know. Thanks again.
We think blue because that would stand out and look cool! Thanks for the long video.
What a privilege to watch a man enjoy his passion and put his all into building something that he will look at for years! Looks great brother
Of course you had to replace that window trim and put something in with your name on it!! Looks awesome and stout !
LOVE the Castle “John Deere” pocket hole tool, VERY WELL MADE and does a great job at those pocket hole “cuts” and the pre drilling its does, NICE TOUCH and is what makes tools like this “in a class of there own” as you get what pay for. My uncle who has production cabinet and custom cabinet making shop/biz (amongst other things) as some AWESOME toys and tools. CNCs, robot suction moving machines, gliding track system on ceiling, and so on. But his pocket hole “stations” are like your, but on steroids as just bigger and even some automated (most) but the precision is impressive, just like your Castle😁
Cheers✌🏻
We don't view this channel simply for the great work and quality but also your passion that you clearly have and are open about. Keep it up!
That screw shim tip is great. Among the many projects i have, my son just bought a house with very old and thin trim with a marble sill.
What’s the purpose of adding the screws shims? Are they used to square and plumb everything, rather than by shinning with traditional wood shims at time of install? He doesn’t appear to go into detail in this video but perhaps he does in another?
@@archerpsu23 he definitely should have done a better job of explaining the screw head trick. lotta confusion here.
nice.
warms that simple window up in a hurry.
don't know how neutral the finished look is your going for, but I've found myself drifting back to good 'ole antique white for trim after all these years.
I do a antique white 75% blend that I love, its pretty timeless imo.
Call me impressed! One trick I learned from my best friend years ago (he installed A LOT of windows at the time) was to use a specific tool to get off the old metal corner-bead. But I probably shouldn't give out his secret! It is called a few things - horseshoe pliers, hoof pincers, farrier's nippers, end cutting nippers, jaw pincers, saddle pliers, etc... Mine are from Harbor Freight (had them for years) and didn't cost much. Use them to grab on to the corner bead, rock it back and forth a few times and pull. Super easy and FAST!
That does work great if it’s nailed, not sure about screwed on bead.
Thanks for the gracious tip. That tool is a lot more common in French carpentry circles where their hammers usually don't have claws. They use those instead for nail straightening and pulling.
Now that is a great tip........ thanks. Can hardly wait to pull my next corner apart.
@@c_mac7773 you not supposed to use screws on bead.
@@ghshomeimprovements We’re not talking about installing corner bead, we’re talking about removing corner bead. I’ve had to remove corner bead that someone screwed in place Many times
Bro. You are Gods chosen. You ARE your generations Scott Carpenter. Love him an you dude. You both rock expertise. Stay blessed. Happy Holidays from Honolulu
I would paint them the same color as the cabinets in the background.. the greyish. it would then match if you are keeping the cabinets.
Great job on this pre assembly. I did this with 6 window units a few months back. they all came out way nice.
Agreed for the color
7ⁿ09 P⁹
Measuring from the screw heads -- wow, great technique. Great demo on the drywall and the corner bead. Demolition is way underestimated as a skill.
I actually don’t get what he did with the screws and measuring from them. Would you explain? I want to attempt this
@@steverodgers9206 The screw heads are basically used like shims. They make the opening uniform and also could be used to make all windows typical in the event that you had several windows that were close in size. You could then pre-cut all your pieces.
Your excitement over creating your workshop puts a smile on my face. You are so genuine!
So … what are you going to make for your wife to keep her happy?
Love your work. Keep doing videos. That pocket hole machine is amazing
Very cool! Your window casing is very reminiscent of a 1908 4-square two-story we lived in. Your crown looks nearly identical to what we had. I had Whiteside custom make a bit for me as I had to replicate the original profile on 17 windows and 14 doors. Former owners had ripped out all the original woodwork on the second floor, then paneled the walls and then trimmed everything in that cheap prefinished garbage you find in a manufactured home. Other difference would be your drip ledge (freeze block) molding below your header board. Ours was about 7/16 thick with a roman ogee profile.
Really liked how you built the entire assembly and pocket holed it together. Cool! Really enjoy your channel! Thank you!
The trim you made is the same trim I have in my 1920s home! Nice craftsmanship.
Midnight blue will look AMAZING..!!
As a beginner Its probably gonna take me one week to digest all the info on this one. Thanks for making me better
It’s cool you are doing that for yourself. My shop space has been hard to organize. Basically I don’t have time to work on it. I have some crap slapped together but I yearn for the time when I can put it all together in a way that is aesthetically pleasing and functional.
The craftsmanship was really nice. Good Job
I love the precision of your work. Unlike production finish carpentry it's not "blow and go". Love it!
Beautiful work
Bro you are super good and thank you for these videos, I’ve learned so many things from them. I too am a finish carpenter(23yrs)
Paint it like a medium dark grey. That would like sweet! Also beautiful work as always!
Your skills are unmatched, yet again. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Just found your channel today. Watching you work is so clear thank you
The top of that mantle looks like free floating shelves I built. Gotta love all the different stuff you can do with crown.
Perfect makes perfection 👏🏼👏🏼👏🏼👏🏼 absolutely beautiful craftsmanship ✊👍👌🏼
The mellowest carpenter ever built, patience of a Buddhist monk. Well done mister, beautiful
Amazing talent, and exceptional craftsmanship. I can truly appreciate your work ! Keep the great videos coming.
Great video as usual! My color vote is to actually leave it white. The contrast is there in the craftsman profile and doesn’t need extra color to do it.
The Makita miter saw was a very good choice. Seems like it is very accurate and very good quality. Makita tools have never let me down..
Now that's how the Pros do it. Excellent job
"load them up, and send it!" Love the channel.
Makita blue for the casing. Absolutely beautiful craftsmanship, 👍
The pocket wholes are beautiful. So clean.
Very nice looking trim. I would go with a light gray. But that’s up to you.
blue/grey color, high gloss!
Grays always look good with white that will make that trim pop ✌️😀👌
It looks like grey it matches your door man i love that saw im jealous
2:05 These white on white on more white, 'Joanna Gaines' looking homes, are literally on every corner in Walworth County, WI. I visited Monmouth County, NJ, over the summer, and saw the same exact thing... everywhere. Gotta be tough coming home drunk and trying to figure which house is 'yours'.
It's nice to look back at your work
Beautiful house. The trimwork looks exceptional. 👌
Makita green for sure!
That pocket hole machine looks like a real time saver.
You’re the king of the hill. 👍🏼
Precision work. I would gladly pay a premium to have you work on my house. I've had several home renovations projects done in the past few years and it is so difficult to find a reliable contractor to do a job well.
You could use as many 18 g nails with some shims and build it all in place in 20 ish minutes. It's all caulked and painted, but you did a great job and it was interesting to see that castle machine in action. What a cool tool!
Sherwin Williams Indigo would be an awesome color for that!
I don’t normally leave comments like I should but YOU are super talented. Amazing work. I did wainscoting and watched your videos on it which helped tremendously. Keep up the great work!!
I’ve seen several suggestions already for Makita blue, but makes sense with your saw being set up right in front of that window. Awesome to see that house you guys were wrapping up also. Amazing work!
Yea, I wont be showing this to my wife, great work!!!!!!
Looks nice and clean and no MDF. Will last for many years. Great job!
It's always great to watch n learn from you. You explain the in's n out's on why you do certain things. I learn something everytime you post. Thanks.
Soft grey for the color. Nice clean work as usual.
Beautiful work sir and floored as I realized that’s a garage. Color statin black.
This house is amazing please show more of the finished product.
Richard you and John are a awesome team
DeLorean Grey. Paint em that!
This man is a true artist.
Great work! And I agree, the pocket holes really makes the job a charm. As for color. I am sure there are more classics but, because of the white you could go black or have a kind of classic british cottage style, a kind of red color, not a flashy red though.
Oh man, what a sweet video. Thank you! I have to do this to 27 huge windows in my remodel. So grateful for this. Can I ask a question.... where do you buy your wood (poplar??) and those gorgeous molding pieces? Is there a secret store that all the master trim carpenters know about? Because it's definitely not the local big box store and not the rough lumber mill.
The trim is where it’s at!
Dude... that is bad arse... nice work
This guy is a true craftsman.
The finish work looks really nice!!
This was a great video. I am a beginning woodworker but have no aspirations to be a trim carpenter. You are an artist. Keep the videos coming.
That multi-mark is another great little tool. It has so many uses. The window framing is always amazing.
I love that castle pocket jig machine. I think you should paint the frame a dark slate color in a matte finish.
Absolutely beautiful! Super cool process to execute a timeless classic as far as the design goes! Thank you for the video!
Pale grey like the cabinets. Fine job ! ! !
I wish u 2 are in sf bay area. I'm a huge fan of your work as a diy homeowner..
That is amazing! Wish I had seen this video 25 years ago.
Love the look of the nickel gap 1x12, great job👍
Awesome idea with the Velcro