This is definitely not good if you touch a car should do it properly the first time it should just get replaced and then it's out the way there's a proper way and then there's Haydens way
Sorry to be negative but that needs stripping right back and then all the crucicial measurements and checks on the chassis to determine if its bent, split or anything else and ultimately if it is possible/feasible to be put back to a safe road-going car again or if its a breaker. Its a long way off of needing bits like the radiator snd hoses sorting out!
When ya watch the like of chris slix, he says hes basically lost on every car. I think its more about pushing the channel, churning out the content, hopefully get a sponsor then youll be laughing. Keep it up. You'll get there
@@JustbeingHayden You should definitely be able to start looking at sponsors now - you've got over 10k so someone will definitely be interested. Might not be loads of money, but can't hurt. Should look at the likes of that Y Food that sponsored lockwood - you're also a gym guy and that too so fit their demographic well!
Yes Big Hayd, Love watching your content you make me laugh everytime, but when your repairing cars, you need to actually repair them, not forget about the bent stuff and just take AC off and run without, putting bent broken parts back on😂😂😂
I think you need to get a proper business plan set out. You are making videos and making big decisions on the fly too much. One minute I’m nodding my head agreeing with you in terms of your logic of ‘use the Subaru as a leaning car and don’t sink too much money into it’…..then a few minutes later it’s like you feel like giving up. I completely sympathise re:parts and ‘this will fit your vehicle’ when on EBay or AutoDoc etc. and then the part comes and it’s never quite right is it. Tough gig you’ve got but you are a good guy.👍👍
Some you win some you loose. I’ve done 4 cars so far but the second one I bought I still have like you I paid too much at the outset and now it owes me far more than it’s worth!! But every days a school day mate
Good vid son as i said i will help you get it sorted and get you on the road its a valuble lesson but you will take that lesson with you on your next venture stay positive 👍
To me its got to make financial sense especially if you dont have the youtube revenue until your channel is larger or another job for income. So when looking for cars i would have personally gone for cars the that sell easier, more common as parts are cheaper. Also before you bid on the car do your checks to see what they go for straight and then cat n/s, price up the parts and that should tell you if you should bid on it and what your max bid should be taking into account fees and transportation. Ive watched another channel where hes done an audi s1, which werent as damaged as yours and he cant sell the thing no matter what he trys.
They are fun cars iv owned a couple first one being a uk300 the went to a blobeye. Am not a big fan on the hatch as they are not your standard looking subaru. But each to there own. Me personally I think you will miss the dc5 man.
Fairplay to you mate keep doing what your doing and never throw the towel in keep working at it, it would be alot easier to replace the slam panel frame and at least then the front would be straighter for new radiators and bumper etc, try online breaker yards
This is definitely not good if you touch a car should do it properly the first time it should just get replaced and then it's out the way there's a proper way and then there's Haydens way
I’d like to see how you’d do it 💪
Most definitely not like that I would strip the front end down and replace it with all brand new
Sorry to be negative but that needs stripping right back and then all the crucicial measurements and checks on the chassis to determine if its bent, split or anything else and ultimately if it is possible/feasible to be put back to a safe road-going car again or if its a breaker. Its a long way off of needing bits like the radiator snd hoses sorting out!
When ya watch the like of chris slix, he says hes basically lost on every car. I think its more about pushing the channel, churning out the content, hopefully get a sponsor then youll be laughing. Keep it up. You'll get there
Dunno how he does it mate
@@JustbeingHayden You should definitely be able to start looking at sponsors now - you've got over 10k so someone will definitely be interested. Might not be loads of money, but can't hurt. Should look at the likes of that Y Food that sponsored lockwood - you're also a gym guy and that too so fit their demographic well!
@drewcadaver some ain’t interested as long as you get over so many views bud 🤘
Yes Big Hayd, Love watching your content you make me laugh everytime, but when your repairing cars, you need to actually repair them, not forget about the bent stuff and just take AC off and run without, putting bent broken parts back on😂😂😂
Go pol postition ask Ian if he’s got light ect I’m sure he will or go Paul in wv2 holyhead estate he will be able ask about for bits for you
Chin up fella, get it running and on Facebook marketplace 😂
I think you need to get a proper business plan set out. You are making videos and making big decisions on the fly too much. One minute I’m nodding my head agreeing with you in terms of your logic of ‘use the Subaru as a leaning car and don’t sink too much money into it’…..then a few minutes later it’s like you feel like giving up. I completely sympathise re:parts and ‘this will fit your vehicle’ when on EBay or AutoDoc etc. and then the part comes and it’s never quite right is it. Tough gig you’ve got but you are a good guy.👍👍
I know man 👍 night mare finding parts 😂 thanks for staying and spending your time watching 🙌🙌
I remember seeing this on copart!
You should of bought it 😂
@@JustbeingHayden 😂😂 it’ll be worth it when it’s done!
Great video pal they've cheered me up watching Great progress keep up the good work
🙌🙌🙌🙌
Some you win some you loose. I’ve done 4 cars so far but the second one I bought I still have like you I paid too much at the outset and now it owes me far more than it’s worth!!
But every days a school day mate
🤞🤞🤞 hopefully the next few car recover the loss man 👍
Keep at it dude it’ll get done and you will be glad you did
💪💪💪💪💪
Good vid son as i said i will help you get it sorted and get you on the road its a valuble lesson but you will take that lesson with you on your next venture stay positive 👍
Weird how you have the same name as me 😜
Contact someone breaking one and get a deal on all parts you need, will work out cheaper if you bargain for more items at once
That’s definitely true
Finish S1 first😊
To me its got to make financial sense especially if you dont have the youtube revenue until your channel is larger or another job for income.
So when looking for cars i would have personally gone for cars the that sell easier, more common as parts are cheaper. Also before you bid on the car do your checks to see what they go for straight and then cat n/s, price up the parts and that should tell you if you should bid on it and what your max bid should be taking into account fees and transportation.
Ive watched another channel where hes done an audi s1, which werent as damaged as yours and he cant sell the thing no matter what he trys.
Totally understand thank you 🙌
That rads off a gd subaru.
Gonna miss the Integra. 😢
Yeah mate I shall
You should do a vid with mat armstrong
Yeah that would work 😂😂😂
Mind when you put the new bumper on it will need mapped 😂😂
Yeah proper nightmare that 😂
They are fun cars iv owned a couple first one being a uk300 the went to a blobeye. Am not a big fan on the hatch as they are not your standard looking subaru. But each to there own. Me personally I think you will miss the dc5 man.
@ktys206 I shall but it offers you lot no content
Another crashed car will 💪
@@JustbeingHayden aslong at it put money in your pocket man that's what matters
Probably best to just sell it on now , live and learn, can see you wasting more and more cash .
😂😂😂 me too
You would make more money breaking that one
I reckon so too maybe
Would it be worth breaking car? Just an idea.
Probably 😂
@@JustbeingHayden Be good see back on road but sometimes you just need to cut loses and get rid and move on.
You sold the Honda
Yes buddy
Your married, what a waste 😭
No waste there lol
Fairplay to you mate keep doing what your doing and never throw the towel in keep working at it, it would be alot easier to replace the slam panel frame and at least then the front would be straighter for new radiators and bumper etc, try online breaker yards
No giving up round here 🙌
@@JustbeingHayden
Fairplay dude i wish you well with this project and cant wait to see it completed
Thanks man 💪💪💪