Ninebot Max G30P Error 14 and 15 Fix
Vložit
- čas přidán 24. 01. 2021
- Error code 14 and 15 with the flashing red wrench! I was able to first fix the problem with a simple reset, shown in the beginning. Eventually, that didn't work anymore. The wires bend sharply going into the connections under the digital display. Straightening the wires and taping the connections seems to fix the problem. (paid link)
Tamper Proof Torx Driver Bits: amzn.to/39hMC5e - Jak na to + styl
Thanks for this. We put pillow stuffing inside to keep wires from bouncing.
Thanks man. Just now got an error 15. Followed the video the cords were bent but could replicate the error. So i straightened them. And then put it back together. And it seems to be fixed.
Had the same problem. Just picked up the scooter and dropped it on its tires from knee high. Fixed it for now. If it happens again, I’ll open it up and replace the connectors. Thanks again!!!
still works?
Worked lol.dropped it before getting on a n elevator and it quit out on me half way to class.
Just dripped it on its tires from knee height and it's fine now. Smh 😂
Hey @rotorbob. Dude your a genius. This just fixed my sons error 14.
Thanks so much. No idea how you thought of that solution. My son says your crazy 😅
Dude thank you! First 22 seconds of video I fixed it. Wow
I had ‘error 15’ showing, done what you did in the video, and it’s cleared it. Those wires was stuffed/crammed into a grey rubber cup with some right angle bends to them.So I took them out of that grey cup and tape each connector, and free those wires so the do not have such a bend on them, THANKS MATE 👍🏾🇬🇧
Had my 1st error code 15 today 24Sept2021.
° The initial problem began when dash and scooter didn't turn on when pressing the button.
° Eventually it turned on, then shortly after beginning to ride the scooter decelerated itself a few times while I was trying to accelerate.
° Then the red 15 began flashing.
° I turned it off and on a few times, but the flashing 15 kept appearing.
° I did a reset after remembering reading about it, and it worked. I made it home and found your vid.
° Watching your video was helpful in confirming what I guessed was the cause.
° Inspecting the issue I now think that hanging any bag over the handlebars can be one cause of such a problem. As when a bag strap/handle finds its way into a small exposed piece of electrical wiring from the brake it can put just enough tension on the connection as to disturb it.
Thanks, good video.
Thank you! Glad it helped.
How did you get it to turn back on… mine is a stuck turned off
Bro you are the best!! Wish I could give your video more likes. Just fixed my Segway in literally 5 minutes. Many thanks!!
Glad it helped
So much clearer and more specific than any other video/site I found (size of each screwdriver, noting zip tie that needs to be cut, etc.). Thank you.
Thanks for the video. my scooted fell over and started giving me the error 15 message. Just used this to fix my scooter. Bought tamper T10 torx screwdriver. Opened it up and the cable was literally unplugged. Plugged it back in and right back to working.
Thank you for this great video. We were able to fix Error 14 👍🏻
Where I can get the tool to open the display ?
Loving your old skool casio watch :)
You just saved me a throttle replacement. Many thanks for that! 👍
wow man worked like a charm, you were right on the tight angles on the cables. xiaomi m365
From Where you got the tool to open the display? Please help..
I wanna buy you a beer man you just solved something that's been bugging me for months.
Thank you for sharing you save my time and I fixed my segway easily 🙏🙏🙏
You just saved my life thanks man 👍🏾
If the black power cord is broken, error 14 will also occur. Thanks for the tip, I finally fixed the issue！！！THANK YOU！！！！
This video saved me.... Thankyousoomuch Sir... Godbless you more🙏
Thank you!!! Hoping this will fix the one that was given to me!!!! 🎉😃🎉
Thank you so much! Best video ever!
This worked for me, thanks!!
You help me a lot, thank yuu very much
Thanks for the video. It works. error 14 solved.
Applied the fix as you described it and it worked! Thank you sir!
Thanks for the help!!!!
Thx mate, perfect advice.
Thank you man 😊
hey i done that to mine was having same issue with mine will ride it later and see if it has fixed it but besides that thanks dude it helped
Thanks this helped. Nice Casio btw
Thank you bro u saved me 2 mhonts its working
it is not a phillips head for the board. It looks like a star with security . Any idea what size bit it is? Thanks
Thank you!
Hello,my scooter is showing the exact same symptoms,but is flashing an error 16,which I can't find a solution too, any ideas?
worked for me. the connection is bad right up next to the display connection - i can tell that my fix won't hold. i'm gonna have to figure out how to fix the blue brake wire right as it enter the solder connection to the board. oh joy. Still, thank you for pointing me in the right direction.
Good job
Many thanks 🐾🐾🐾
Hey for some reason mine wasn't that easy where else should I check?
hello, my scooter is stuck on 20km/h (12-13mp/h) in every mode eco,drive and sport what can i do?
Think the person who had the scooter before me couldnt figure out the problem and replaced the handle with the wrong one, and to rid of the error codes 14 & 15 I have to find the correct replacement as I checked every video in history and tried every single trick haha
THANK YOU!
You're welcome!
Thanks 👍🏾
What do I do if my handle bars aren’t straight too
Good video! Anybody knows how can i reset the mileage of my scooter (not selling reasons) please?
Thanks
i had the same problem, sometime works and some time shome error 15 and the scooter stop, i usually press the break and run again.
that's what I did sometime just release the throttle also work. Not sure if something is loose in there or shorting.
I have error 18, what's wrong with it?
What is its not that? What would be the next step? I'm getting the 15 error but nothing I do with the wires, like you show, does anything.
Did you find a solution?
my scooter screen doesnt turn on at all ninebot max plus what could be been siting ayear trying to fix it myself
You should probably have cut and soldered these.. once a connection like that is bad it will never be fully ok by just bending in my experience: issue always returns at some point.
I have this error after send my scooter to friend ask him repair. But I can use normal not a problem, only error 14 appear. Thanks upload the video will fix ASAP.
Hi my scooter is new then sudenly when i turn on it start beeping non stop and not showing any error codes its just freeze all can someone help me pls.
Any other options got error 14 nothing has changed
There is a decrease in the speed, the speed was 25 km before, and now the speed has become 22 km in the fast sports mode, how can I restore the speed as it was in the first 25 km
I have a new throttle but still im getting this error every day ! dont know what is wrong !
Now do a tutorial on Ninebot F40e/F40 on how to get the screen out.
Hola. En la Pantalla abajo de Km me aparece ECO alguien sabe que sucede?
Why dose mine say Error 18
i had a code 16 can somebody help
My scooter charges but stop after a few minutes can this be the same problem it charges but only at 95 percent
Thankfully I don’t have any problems yet
I would just solder them and you’ll be set for life !.!.
Questo G30 Max costa molto e da errori cos'ì stupidi? complimenti alla segway per le finiture al risparmio. Grazie per la soluzione.
Mine scooter sometimes shows the same error and sometimes not . Where I can get the tool to open the display ? I also want to fix the error, I am not able to open the display without that specific tool.please help me.
It’s called a torx screwdriver
Buy torx screwdriver
I have error 10
Very since scooter
Mein error 10 🤷♂️
Just solder them.
what a horrible company, brand new scooter and Bluetooth not working !
Thank you !